How to replace the power steering pump on a Ford Edge 2007-2012

power steering pump:
amzn.to/3yGK6Pj
Here is the link to the power rack and pinion replacement.
• Replacing Ford Edge po...

[@NurulHuda-vq8hh]

Thanks and incredible for the detail recording by one hand and working by the other hand. Really informative and helpful

[@s33therfan]

I appreciate the terrific feedback, thank you for watching.

[@TroublemanJ]

The best video ever made n really helpful step by step. Now this is a real machinist at its finesse. 💯 💯 💯

[@JLT3]

Thank you for taking the time to film and talk us through this, these are the videos that make KZbin such a valuable resource.

[@s33therfan]

Great feedback and much appreciated . Thank you for watching.

[@johnchoe2150]

Ford engineers are real genius

[@takactionphoto]

Great job! One of the best home mechanic videos I’ve seen. Calm, patient, not a lot of extra stories. Amazingly good one handed camera work!

[@s33therfan]

Thank you for the awesome feedback.

[@dbell9628]

Thanks those zip ties saved a life today. My mechanic was on it for hours then I came and showed him this. I knew it work he couldn't believe it

[@s33therfan]

Thank you for the great feedback and thanks for watching.

[@MS-dx6yz]

Great vid sir. Working on a water pump. This was helpful! [Glad I watched to the part where you figured out it was only only 3 bolts! 😅]

[@s33therfan]

Nice work , thanks for the feedback.

[@hs4a085]

You did all this with only an hour of daylight? Sir, you are the man!! It took me almost 3 days to replace mines. And I took of way more than you lol so happy I found your video!!

[@s33therfan]

Thank you very much for watching and the terrific feedback.

[@AA--Gamer]

Thank you for the video, I just did the same job, same car and couldn't have done it with out this video. It was a nightmare job because the manufacturer put the pump and screws in very difficult places to reach. Thanks for the zip-tie idea too! (the hardest part of the job is lining up the new pump and getting the screws into the threads)

[@s33therfan]

Great job replacing this yourself , thanks for watching.

[@thomasjohnson3368]

Omg finally a DIYer who gets it excellent vid I've been trying to find out where this green wire goes for weeks..now I can get this woop woop woop woop noise to stop....power straring pressure switch LOVE ya man keep up the good vids😊

[@lysleanderson9137]

You have remarkable patience and resourcefulness sir! Nicely done.

[@s33therfan]

Thank you so much for the great feedback, and thanks for watching.

[@ujmrider]

Ford should be ashamed of themselves for the engineering of these cars, but i know they're not.

[@ronaldwerner3542]

I agree with you 💯. Subaru seems to be the only car company that builds cars for the owner to be able to work on it. My 1966 Ford bronco was the only ford easy to work on. The government should have let the American car companies fail instead of using tax dollars to bail them out.

[@Harrell423]

I took the car half way apart.. did all of it from the bottom and can't get the last bolt.. your awesome man I really appreciate it!

[@s33therfan]

Thank you for the great feedback.

[@BrookeDropDead]

I would have never been able to get that belt on without learning that zip tie method. Thank you.

[@s33therfan]

Glad I could help , thank you for the great feedback.

[@osueric87]

I have a 2010 fusion sport with a 3.5L I believe I will have a very similar project and I appreciate you for putting this video on KZbin.

[@s33therfan]

Thank you very much for the great feedback.

[@tylercunningham8204]

I'm just about to do this on my 2010 Fusion 3.5L. Was it significantly different? The short run of that car and engine makes it tough to find info on.

[@ybaldeagle]

Thank you, thank you. I couldn't get the power steering pump belt on. Your tip with the zip ties came in handy and saved the day. Thank you!

[@s33therfan]

Thank you for the great feedback.

[@K64250]

Thanks for the zip tie trick to get the belt on. I just did a water pump on one of these, what a pain!

[@s33therfan]

Thank you very much for the great feedback I am glad it could help. Thank you for watching.

[@scottzmich]

Thanks a million for taking the time to make this video, no way in the world I could have made this repair without instruction. Any vids on changing the tss and oss in the trans because I think that’s next to go, lol

[@s33therfan]

Thank you very much for the terrific feedback, much appreciated.

[@albertoferrer5912]

Bro I just did it, 4 hours 😢 thank you!!!!! You are fantastic, i dont know if you do this on a daily but amazing video and very descriptive of everything you are doing.

[@s33therfan]

Thank you so much.

[@luisflopez3083]

Really good video , thank you I got a 07 Lincoln MKX looks like a lot of work but that's what I'm gonna be doing this weekend, once again thanks for the video.

[@s33therfan]

Thank you for the great feedback and thanks for watching

[@eastcoastnews9529]

Incredible detail dude 👍🙏🏼✊🏻 thank you for taking the time to explain even wrench size and all 🙌🏻

[@s33therfan]

Thank you very much for the great feedback and thank you for watching

[@s33therfan]

Thats a very good question. On parts like these I like to have a good visual understanding of the lines etc. For instance the high pressure line , which is the metal line that bolts down is the most likely culprit. The rubber hose line is the fill line and not under pressure. The rubber hose could be remedied by putting a hose clamp the screw down type. The high pressure line would need replaced . Now I have heard of the high pressure leaking I do not see how really because the bolt uses copper washers to fasten it and they are usually pretty reliable . So i guess the line itself could be leaking . I would more suspect the pump seal itself and would try to inspect from the fender well and also using a phone recorder etc from the top to inspect it without removing it. Most of the time the rack and pinion is leaking , but anwhere on the hoses linking the pump the cooler and the rack can be a leak . In this particular case the pump had failed due to the rack and pinion leaking excessively and burning the pump out. Hope this helps and thank you for watching. Heres a link to the rack and pinion if youd like to check that out . Watch "Replacing Ford Edge power steering rack n pinion 2007-2013" on KZbin kzbin.info/www/bejne/m5-VnIhpoNxkfM0

[@TaofeeqOlasunkanmiswizzy-mc3od]

This will real help me out to do mine perfectly,thanks ❤️ for the video

[@chetedwards2483]

Fantastic video. Your patience and explanations were right on. Very helpful!

[@s33therfan]

Thank you very much for the great feedback I really appreciate it.

[@772777777777777]

Great detail in your removal and reinstall.. best video I have seen.

[@s33therfan]

Thank you very much , love the feedback.

[@IconMaintenance]

Really good step by step video! Thanks for sharing this!

[@s33therfan]

You're very welcome!

[@tayloranderson1291]

Great video! Excellent job.

[@s33therfan]

Thank you very much!

[@joselopez1544]

Good job. Great tutorial. Not as hard as I taught. No different from a Junky Nissan. Thanks 👍😊😊😊

[@s33therfan]

Thank you for the feedback , and thanks for watching.

[@thomasjohnson3368]

I AGREE YOU ARE MR. YOU TUBE IN MY BOOK THANKX AGAIN BLESSED ..LOVE YA MAN

[@ryanbeshears931]

I would go to your local parts store and get yourself some hose picks. Very cheap maybe 20-40 bucks and I literally can’t believe I ever worked on cars without them

[@berad187]

What really bothers me is this designed power steering pump doesn't have a tension adjustment bolt where we don't know if this is tight or not that's where i noticed that on my ford edge engine that is definitely different. Otherwise thanks for the video on this new pump installation.

[@bluebyrdnit]

Thanks for the detailed instructions ❤

[@s33therfan]

Any time! Thank you for the feedback.

[@kccarl2582]

Great video!!! helped me a ton. what a pos design! thanks for video!!

[@romanbap6842]

This helped me with my Ford Flex 🤙🏽

[@s33therfan]

Thank you for the feedback and thanks for watching.

[@juanalcantara4945]

The best video in KZbin

[@s33therfan]

Thank you for the fantastic feedback , it is much appreciated.

[@70Chevelle454BBC]

You had a lot more room than my 2011 to get the pump out. Thanks for the help, couldn't have done it without you.

[@truckintomg]

Was your 2011 the same? I'm trying to do mine but appears to be different

[@hs4a085]

2011 is a little different. The high pressure line in at the bottom instead of the top

[@MrEvanCabo]

This video is awesome. Couldnt have done this without you. Have a problem though. I watched closely on how to hook up geounds and checked them but, my car is NOT equipped with autostart. But when i hooked everything up then put on neg cable the light's quickly flashed and the vehicle turned on with no key in column! Runs ten seconds and turns off, waits ten secomds and then runs for amother 10 secs. If you put a key in or hit brake, it shuts off. So confused. But you cant start it with key.

[@basics7930]

Beat engine design even seen😂❤

[@s33therfan]

Thank you for watching.

[@anthonybullard3611]

Good work man!

[@s33therfan]

Appreciate it! Thank you for the feedback.

[@armando.c6981]

thanks good job

[@s33therfan]

You are welcome , I appreciate the feedback.

[@luisalbertoarteagatovar1984]

thank you soo much for the video

[@s33therfan]

Always welcome , thank you for watching.

[@jamescollins5073]

Nice video, but you make it look easier than what it is. Its seems that my water pump decided to expload, and the power steering pump just so happens to be bolted to the timing cover, go figure.

[@alfonsomontenegrosalazar2255]

Omg god bless you man

[@s33therfan]

Thank you very much.

[@johnessany4313]

Very good video

[@s33therfan]

Thanks for watching .

[@heshimuwilson8759]

Thank You

[@s33therfan]

You are welcome , I appreciate the feedback.

[@vlado85max]

Good job mate

[@s33therfan]

Thank you for the kind words.

[@goatsmakesoapco.9113]

Are we sure this only works up to a 2012? I thought first gen went up to 2013 or 14?

[@dwaynealexander8637]

Thanks I have a 2008 Ford Fusion. Not a lot of videos on the 3.0 power steering pump replacement.

[@asilaydying672]

I couldn’t find anything on the 2008 Ford Fusion 3.0 either. I’m going to be doing one on my grandmothers car today. And this is the same exact method? How long did it take you?

[@charltonconnor3328]

Big help thanks😊👍

[@s33therfan]

Thank you very much for the great feedback and thank you for watching.

[@jake3700]

what did you torque the supply line hose bolt to? (i believe it's a 12mm) after doing the water pump job i have a power steering leak that seems to be coming from the bolt area of the supply hose

[@s33therfan]

I only snugged it up , but I would think no more than 35 ft lbs if you can get to it. The main thing is to not overtighten and ruin the bolt. You may try a new washer or even a banjo washer with rubber seals , I have had to go this route on banjo bolts on transmission lines that refused to stop leaking. Hope this helps.

[@jake3700]

@@s33therfan sorry, i worded that badly. i was referring to the low pressure hose supplying the p/s pump with fluid from the reservoir. turned out my issue was a small o ring on the inside that deteriorated and was sucking air into the pump when it was operating and leaking fluid on the ground when it wasn't. also i couldn't have even dreamed about doing the water pump r&r without your video on it. from the bottom of my heart (and wallet) thank you for all your guidance

[@frankriley5705]

I'm working on the water pump on a 2010 Ford edge and I'm still pulling parts off that thing is a pain in the ass you got to pull the timing chain cover just to get to the damn water pump

[@impalarg2012]

Quick question if you can answer it so both of copper washers go in between the pressure line

[@s33therfan]

The pressure line is sandwiched between the copper washers . But yes they both need to be installed . Thank you for the feedback.

[@ashtondavis790]

Is there 4 or 3 bolts that hold it on?

[@s33therfan]

There should be 4 , thanks for the question.

[@Outdoorboys_fanclips]

What’s the labor time for this job

[@netflooder263]

What were the symptoms you had of the pump going bad?

[@s33therfan]

The steering was near impossible to move once it finally failed. Thanks for the feedback.

[@netflooder263]

@s33therfan I had a hard to steer issue going on in my flex, I was 🤏close to starting to take out the pump but decided to check the steering shaft. The u-joint in the shaft had seized up in one direction, luckily I was able to free it up. Lol, this was a little easier than dealing with the pump.

[@timandjessica4204]

The bolt on the top left of mine is slightly rounded. Enough to where I can't get a socket to catch and hold. My last ditch effort is get a 10mm wrench, which seems to missing from my set, and attempt to do it that way. Any tricks you can offer so I don't have to take the engine out to cut the bolt off?

[@s33therfan]

I can't remember if there is room , but I am thinking a hammer and narrow chisel/center punch. Hit it on the outer edge trying to make it rotate. If that fails , I would cut , grind or remove by any means necessary the bolt head. Depending on my mood I might take the pump apart in pieces. I will say this , any time it actually mattered for me the rounded head sockets let me down. Anyways this kind of stuff happens with bolts being overly tight, all you can do is clear room to work if possible. I have cut off bolt heads with limited room and a hack saw blade itself. Was not fun. Wish I could be more help and thanks for your feedback.

[@timandjessica4204]

@@s33therfan Actually got it off that day. Bought a 10mm wrench, since it was the only one missing from the set, and had to bend it at a 45° angle so I could turn it once I got it on the bolt. Now I'm having issues with my engine. I've got the car back together, but it won't start without sputtering out and dying.

[@unknown93516]

damn you can literally do it step by step

[@s33therfan]

Thank you for the feedback , and thanks for watching.

[@nigelbrie5693]

Anybody know what that flat wire he is touching @8 minutes is called? I need to replace mine...

[@santiagomendoza4960]

Gracias buen video

[@s33therfan]

agradezco las amables palabras y gracias por mirar

[@deijacarty7084]

Do you have to put it on Neutral when turning the crank shaft pulley with 18mm

[@s33therfan]

No not at all , just make sure to turn it clockwise. Thank you for watching.

[@donspencer2110]

Only if there's a manual transmission in the vehicle.

[@leenino4170]

Ok where the heck did you buy the pump with the pulley? Every store I've called doesnt have that option. '09 Mercury Sable Premier 131k same engine.

[@s33therfan]

For your cars pump they do not sell them with the pulley . I am not sure why unless there is an installation issue. However you can purchase a low miled used pump off of ebay , which is what I do anymore. But it is up to you on how you want to do. Hope this helps and thank you for watching.

[@K00H]

Do you have an oil leak when the pump failing?

[@s33therfan]

It was leaking from the rack . I had replaced that in another video. Thanks for watching.

[@Matty_1985]

Is this the 3.5?

[@s33therfan]

Yes it is , thanks for watching.

[@waynetroutfish142]

Thats about where its leaking at

[@mayken6661]

That top one is the B !!!

[@warrior302]

Is this the same fix for the Lincoln MKX?

[@s33therfan]

Great question. I believe they should be identical , just the lincoln version. Thanks for watching.

[@garypascal2154]

@@s33therfan Thanks!👍🏾

[@RoegmailcomReynolds]

how do I know if this is the actual issue. my steering wheel is stiff asf?

[@s33therfan]

If its hard to steer and not low on fluid its going to be your pump. There could also be some secondary issues leaks etc that caused it to fail or it could have just failed. The rack and pinion is bad to leak inside the boots and you can't tell unless pulling one off. There could be a leak on a line. If no leaks then replacing the pump should fix the issue . Thanks for watching

[@erwinrommel2055]

I work on this stuff everyday. Ford seems to make you go the extra mile. To say the least.

[@s33therfan]

That is for sure. Thank you for the feedback.

[@buck4129]

How many hours it took

[@s33therfan]

Best I recall I spent 4 or 5 hours. Thanks for watching.

[@israel7294]

Is this one of the worst pumps to change? How much would a job like this cost

[@s33therfan]

Actually it is one of the worst I have encountered. I really hope someone else can chime in . I would just be guessing at couple hundred labor maybe, if its dealer it will be way way more. Thanks for watching.

[@davidkeeton6716]

No, it's not the worst power steering pump repair. On an 06 Altima 3.5 the pump is chain driven by the timing chain. That engine is so tight against the fender that you have to do it with a remote camera.

[@davidkeeton6716]

Only a college educated engineer would design it with no belt tensioner and have you stretch the belt, walking it over the pulleys, possibly breaking the cords in the belt. Morons

[@eastcoastnews9529]

What’s a ballpark fair price for this repair sir

[@s33therfan]

I have not priced it but I would think around 200 for labor. You may be able to save some money by providing your own parts. I know the parts store pumps are around $100 and up. So 300 to 400 total I would think. Thanks for watching

[@RedKnob]

Hi, I just need to replace power steering pulley or should I replace whole pump? Any special tools needed for replacing pulley, there is limited space on ford edge 2007.

[@s33therfan]

Auto zone did have a nice loaner tool that had jaws with special teeth to grip the pulley. If my memory serves me correct this edge doesn't have the typical pulley that uses split collar type pulley remover. Either way the access would be near impossible on the vehicle. If it were me I would replace it with a good low miled used pump and call it a day. But its up to you replacing the pulley works also. I know ebay has pumps with 70k for the price of a pulley. Hope this helps and thanks for watching.

[@ethanaustin2706]

I took engine removal bracket off that's gone I took the header reflector sheild gone still can't find fckn bolt

[@s33therfan]

I had corrected myself in the video as there is only one bolt on the top and 2 on the bottom. The top bolt is directly behind where the high pressure line bolts down. Just follow from the high pressure port back just a little and you should be able to find it . Its almost impossible to see anything back in there and you have to rely on feel. Hope this helps and thanks for watching.

[@abdulhassan1107]

A very nasty job, not an appealing one for the average DIYer, especially in +100*F climate.. thanks for giving us a good idea

[@s33therfan]

I agree the heat is brutal. Thanks for the feedback.

[@ujmrider]

This type of engineering is why i hate Ford products. So much work to repair something thats such a common failure point. Why in the actual f*ck would they not put in bullet proof, long lasting parts in that inaccessible location!? I guess its the corporate bean counters fault.

[@s33therfan]

If you don't like these , I am pretty sure you would hate the new Ford Escapes. Take a look under the hood of one , if you get a chance. I appreciate the feedback and thank you for watching.