Рет қаралды 23,182
Easy to follow step-by-step guide on how to replace your valve cover gaskets, spark plugs, and spark plug wires. It is quite a long job but it’s more tedious than hard, there was roughly two and a half hours of footage for this job. It seems like a lot but don’t let that scare you, it’s just tedious and memorizing where all the nuts and bolts go! If you have any questions, drop them in the comments below and I’ll get back to you when I can.
Tools Used:
-Door trim and panel remover.
-Pick.
-Long nose plier.
-Plier.
-3/8in ratchet.
-Two different lengths of 3/8in extensions.
-5/8in spark plug socket.
-14mm socket.
-Two different lengths of 12mm sockets.
-Two different lengths of 10mm sockets.
-1/4in ratchet.
-Two different lengths of 1/4in extensions.
-10mm flex socket.
-10mm socket (standard).
-14mm wrench.
-12mm wrench.
-10mm wrench.
-14mm wrench with a swivel socket.
-Two different sizes of flat tip screwdrivers.
-Brake clean.
-Spray adhesive.
-Anti seize.
-Silicone spray.
-Dielectric grease.
-Silicone.
Parts Used:
-Valve cover gasket kit.
-Valve cover grommets.
-Spark plugs wires.
-Cam plugs.
-Upper intake gaskets.
-Spark plugs.
-PCV valve.
-PCV valve grommet.
As always make sure you subscribe, give me the thumbs up, and share with your friends & family! Thanks for watching, aloha!