How to Replace Track Bar 1994-2002 Dodge Ram 2500

Buy Now!
New Track Bar from 1AAuto.com 1aau.to/ia/1ASSL00019
This video shows you how to install a new track bar from TRQ on your 1994-2002 Dodge Ram 2500. The track bar keeps solid axles in line with the body. A worn, weak or missing track bar could result in dangerous driving conditions and should be replaced.
This process should be similar on the following vehicles:
1994 Dodge Ram 2500
1995 Dodge Ram 2500
1996 Dodge Ram 2500
1997 Dodge Ram 2500
1998 Dodge Ram 2500
1999 Dodge Ram 2500
2000 Dodge Ram 2500
2001 Dodge Ram 2500
2002 Dodge Ram 2500
Tools you will need:
• 18mm Socket 1aau.to/oajx/1AXAA00043
• 21mm Socket 1aau.to/oajx/1AXAA00043
• Pickle Fork
• Tin snips
• Wire Cutters
• 1/2 Inch Ratchet 1aau.to/oajx/1AXAA00043
• 1/4 Inch Ratchet 1aau.to/obep/1AXAA00017
• 3/8 Inch Drive Ratchet 1aau.to/obyE/1AXAA00015
• Torque Wrench 1aau.to/oaHX/1AXAA00044
• Brake Parts Cleaner
• Gloves 1aau.to/oadi/1AXSS00048
• Rust Penetrant
• Safety Glasses 1aau.to/o6q/1AXAA00343
• Hammer 1aau.to/oU9/1AXAA00091
• Ratchet Strap
• Wire Brush 1aau.to/otv/1AXAA00079
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@bigjimbo560]

good video, thanks.....why would it need to be alignesd at a shop after changing the track bar?

[@joesphreed827]

Does the front end need to be lifted off the ground?

[@user-bm9rb7yk7z]

Thanks! I'll try to do it.