How to Replace Vapor Canister Purge Solenoid Valve 2010-17 Nissan Sentra

Buy Now!
New Vapor Canister Vent Solenoid from 1AAuto.com 1aau.to/ia/1AEM...
Vapor purge valves are an important part of the EVAP system that allow the contained fuel vapors to be released into the combustion chamber under certain conditions. Modern purge valves are controlled by the vehicle’s computer system, and electronic solenoids. Failure of the valve or the control solenoid will result in an emissions trouble code that could prevent passing emissions testing. This video shows you how to install a new vapor purge valve or purge valve solenoid on your 2010-17 Nissan Sentra.
• Buy TRQ at 1AAuto.com: www.1aauto.com...
• Check here for more videos on the 2013-2019 Nissan Sentra: • Nissan Sentra 2013-19 ...
This process should be similar on the following vehicles:
2013 Nissan Sentra
2014 Nissan Sentra
2015 Nissan Sentra
2016 Nissan Sentra
2017 Nissan Sentra
2018 Nissan Sentra
2019 Nissan Sentra
Tools you will need:
• 10mm Socket 1aau.to/oa/1AXA...
• Trim Tool Set 1aau.to/oa/1AXX...
• Ratchet 1aau.to/oa/1AXA...
• Cloth Rags 1aau.to/oa/1AXS...
• Pick 1aau.to/oa/1AXA...
Subscribe: / @trq
Check out our playlist:
Nissan Sentra 2013-19 7th Generation: • Nissan Sentra 2013-19 ...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

[@lexsoft3969]

Wrong.. it is Evap Canister Vent control valve which is placed near the canister. The Purge control Solenoid valve is placed on the engine compartment, near the intake manifold. There are two other components related to it on the engine comparment : 1. Evap canister purge Volume control valve 2. Evap canister purge control valve

[@alexmunoz1873]

Thank God for people that take their time to post this information and pass on the knowledge they’ve learned!

[@ripptydevibes2581]

Title states this is a purge valve, but its actually a vent valve

[@tuckerharju6175]

For anyone that it helps: this part on my 2014 Nissan Sentra was behind the rear passenger side wheel right by the bumper. I was able to reach it easily by backing the car onto ramps

[@MrRsalinas69]

Does this prevent the gas from back pressuring when filling up?

[@TheKelhud1985]

You literally just saved me $850 that the dealership was going to charge me

[@Breezyronn]

For anyone trying to get the part yourself is a purge vent

[@always2271]

What about a 2008 Nissan Sentra where is it located

[@Blitzonu01]

Never showed location😢

[@chrizflorez2425]

I’m having a P0456 code for my 2010 Infiniti. The hose you’re taking on and off, the other end connects to a plastic piece. Is that piece suppose to be loose? Bc it’s very loose on mine and I’m assuming that’s what’s causing the code

[@josecontreras161]

Is it from the front or back of the car???

[@anthonyburtrum8257]

Front

[@carliushardin4229]

Every search for this for a 2017 infiniti qx50 comes up this. Nissan switched it up when it came to it's Infiniti brand. I'm under the SUV as we speak

[@TimJones-fm2uf]

Drivers side or passenger?

[@ninjalee7272.]

Any idea 2015 nissan altima evap system purge control valve "a" circuit location?

[@marcusdarnell3348]

Great video! Does this procedure apply to a 2019 Nissan sentra

[@alexmedina0595]

Is it the same for a versa

[@josefranciscoesquertalaman3827]

Presente en clases de mecánica automotriz en Navojoa Sonora México 🎉

[@sajeedlakhani]

Nice Video!! Thanks for taking the time to make it and share with all the DIY’ers. Is this under the car? If so, front or rear and driver side or passenger side? I have the part on hand, can’t figure out where to begin. Thanks again!!

[@frankserio6952]

The 2005 Sentra has the plastic cover behind the left rear wheel.. Is the purge valve in the same spot as the video shows ?

[@TYGON100]

I have a 2006 nissan sentra 1.8 . I put a new fuel pump but still get the smell of fuel inside the car once in a while. Would the purge valve have anything to do with it,and if it does, is it the same as in tje 2010 model.?? Thanks!!

[@81salinas]

Hello can you tell the part number please for this part

[@gavinjaques5221]

14935 “drain cut valve”

[@2bnax]

CAN'T DETERMINE WHERE YOU ARE IN RELATION TO THE UNDERSIDE OF THE CAR. THIS IS A COMMON PROBLEM WITH VIDEOS; IT WOULD HELP TO SHOW THE EXTERNAL PSRT OF CAR BEFORE TACKLING A JOB UNDERNEATH. THANKS

[@TRQ]

+@2bnax Thanks for checking us out! Our video studio is based out of Massachusetts.

[@percivalsongs2420]

I tried for 2 hours to do this install and the part wouldn't go in, pushed pretty hard too. Finally tried it without the washer and it went right in. Any ideas on why I couldn't fit with the rubber washer on?

[@Taurusfield]

Is the solenoid valve located in the same place for the 2013 Nissan versa? I'm getting a gas smell in the cabin.

[@TRUCKERCOLT]

What does that hose connect to off the purge? My hose is completely gone but don’t know where to connect it to.

[@billymorris3265]

I searched nv2500 emissions and this came up first. Amazed it could be this far off and still Nissan.

[@gilbertsalazarjr3956]

Where is the canister purge valve located on a 2016 Nissan Sentra? Thanks in advance.

[@Justme-or7px]

How to buy bolts for Nissan Sentra sr 2010

[@81salinas]

Do younknow the part number please I can't find it

[@cobydemello4532]

Would this work for 2016 Versa ?

[@ricardoventuraventurafloor8070]

🤙🏾 thanks

[@jeremiaharagon7148]

What do you call that plastic hose in the middle of the canister?

[@gabrielemiller8006]

Great video , 🙏 😇 Thank you 😀😅

[@stoplookinent4791]

So this works without resetting the computer?

[@AnythingEverythingGh]

Please where does the big hose on it go? The atmosphere or back to the gas tank?

[@ayedew9227]

Vent Valve not Purge Valve

[@davidsinger2247]

Don't lose that 10mm, lol.

[@vinogiovanni98]

Best video for this repair

[@davidrojas3753]

Will that cause the car to mist

[@chealoutman5]

Tysm 👍

[@jerzyprzeslakiewicz5428]

Thanks for the video👍.

[@TRQ]

+Jerzy Przeslakiewicz Thanks for watching our video! 1aau.to/m/Shop-TRQ

[@Provision600]

Was that the front or back of the car.

[@Posi12Bolt]

the rear

[@slams777]

@@Posi12Bolt where

[@kevintowing-odioso3187]

Ty!!!!!!

[@TRQ]

+KevinTowing - /Odioso Thanks for watching our video! 1aau.to/m/Shop-TRQ