How to Replace Water Pump 2012-2017 Toyota Camry

Buy Now!
New Engine Water Pump from 1AAuto.com 1aau.to/ia/1AEWP00210
This video shows you how to install a TRQ water pump in your 2012-2017 Toyota Camry. The water pump keeps coolant flowing through your engine. Common failures of the water pump will leave the coolant leaking, or stagnant. Both will lead to overheating if left untreated. Install a new engineered to fit water pump from TRQ for total peace of mind.
This process should be similar on the following vehicles:
2012 Toyota Camry
2013 Toyota Camry
2014 Toyota Camry
2015 Toyota Camry
2016 Toyota Camry
2017 Toyota Camry
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oa4Z/1AXAA00013
• Pry Bar 1aau.to/oJG/1AXAA00020
• 12mm Wrench 1aau.to/oMj/1AXAA00010
• 19mm Wrench 1aau.to/oMj/1AXAA00010
• 10mm Socket 1aau.to/oaN7/1AXAA00017
• 12mm Socket 1aau.to/oa6u/1AXAA00015
• 14mm Socket 1aau.to/oa6u/1AXAA00015
• 19mm Socket 1aau.to/o3V/1AXAA00043
• Coolant Funnel Set 1aau.to/oa9/1AXAA00116
• Serpentine Belt Tensioner Tool 1aau.to/ocg/1AXAA00019
• Trim Tool Set 1aau.to/oWp/1AXXX00006
• Hose Clamp Pliers 1aau.to/oea/1AXAA00076
• Pliers
• Ratchet 1aau.to/obhB/1AXAA00016
• Socket Extensions 1aau.to/oa6u/1AXAA00015
• Torque Wrench 1aau.to/oanW/1AXAA00044
• Block of Wood
• Cloth Rags 1aau.to/oxE/1AXSS00035
• Liquid Thread Locker
• Drain Pan 1aau.to/otF/1AXAA00320
• Floor Jack 1aau.to/oRj/1AXAA00068
• Jack Stands 1aau.to/oLY/1AXAA00065
• Pick 1aau.to/oEP/1AXAA00037
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@outoftime788]

why green coolant? thot it suposed to b red/pink?

[@lbillie3103]

Very big job. My man, you look like you know what ur doing.

[@unebonnevie]

Excellent video! Pretty much the same steps for Lexus RX350/RX450h. At 22:59, the thermostat o-ring has an arrow on it. Make sure to install it pointing to the right direction! I would wait a bit for all the thermostat's 12mm bolts that have sealing material on them cured before putting in the coolant. Once the coolant is in, check for leaks before putting on plastic panels.

[@jmsikorski1988]

Awesome video other than having your fingers in between the motor mount while lowering it, thats a pinch point i learned the hard way and lost part of the tip of my finger, us a pry bar or screwdriver to push the stud

[@roshanmuhsin9748]

Great Instructions with specs and tricks.

[@ocvn84]

Can you advise the type of thread sealant for the bolts? Thanks!

[@AC-vt1nq]

Excellent job!!!

[@phiayang9787]

U do good job.

[@AlCatrraz]

CLOCKWISE vs COUNTER CLOCKWISE for reverse thread.. Very involved... I was hoping to do it myself.... 😆😅 How long did it take you ?? THNX

[@wowyummyyy]

LIKE👍👍👍👍👍 💗💗💗 💗💗 😎😎😎😎