How to replace wind wings & windows, 64-66 Chevy C-10

Рет қаралды 56,656

9 жыл бұрын

I cut out many minutes of struggle to get the window back on the roller. Consider having a good glass shop that has lots of experience with older vehicles do the job if you wish to avoid some headaches.
It sure helped a lot that there was that extra hole in the door panel.

Пікірлер: 58

@michaelholz2631 3 жыл бұрын

I really appreciate that you get right to the point. No music intro. No unnecessary BS. No long-winded explanations of the obvious. Great video. Thanks.

@henrytupper6959

This video is better than most c10 instructions because it is most like my 67 G10 van. I see you got a totally new vent window Assy. Don’t think it’s available for the van so I am fighting to reseal it. Pita. Your explanation of the sequence will help on reassembly. My main window fell out of the track, that’s what got me started in the first place.

@rattycaddy 7 жыл бұрын

Do Not Ever let the door glass slip and fall to the bottom of the door body. The window roller frame Will dent the outside of your freshly painted door causing you to cry and cuss alot.

@jimvikse7453

Wow! That is a big job! I replaced the passenger window in my first car a few times. I don't think I ever got it right. Lol!

@johnyrrr1 4 жыл бұрын

I did my door seals yesterday and now after watching your well done video I finish the rest of it. Job well done, thank you for taking the time, I would buy you a beer if I ever met you.

@dans9228 4 жыл бұрын

This is a fantastic video. I had no idea how to remove my 1966 vent or window. Your video is clear, to the point, and well done. Thank you for this great video!

@ritchardposterior262

Thank you for this video, it is helping me build my truck. Hope you still drive yours!

@thecynic807 2 жыл бұрын

My 65 chevy G10 van windows wint stay in the track down inside the door. Afraid to take it apart more than I did. Seeing how no one makes spare parts for these. I had to have a windshield and side window cut and it was not cheap.

@thecynic807 2 жыл бұрын

You must have worked in a gm plant.

@murrayd7259 2 жыл бұрын

Great video. Instead of the rubber tape to hold the glass in the channel I used windshield urethane. I also pinch the channel so it doesn't catch on the new wiper whiskers.

@grantimbrock

This is great. Super straight forward and simple instructions. Saved for when my windows come in for my project 66

@jeffroberts1834 4 жыл бұрын

Thanks so much for this video. I am preparing to do my '66 and had no idea how to actually remove the vent after removing the panel. Your video was so helpful and precise. Thanks a bunch

@jimmysullivan6118 2 жыл бұрын

Very good video and really nice truck. It is nice not to have music playing in the background 😁really nice truck you did a nice job restoring it and just subscribed to your channel I have a c10 1 ton dump truck ive been working on that was my dads I'm replacing the window rollers its aggravating working in such a close space you got to have patience and I can see you have plenty

@TURBOELITIST 4 жыл бұрын

Thank you so much for this helpful video. My passenger-side window got cracked and I was worried that if I don’t remove it properly it would shatter and create a mess. Thanks to you I was able to remove the small folding window easily, which I had no idea was removable, then had more than enough space to remove the actual window without any problems. Again, thank you for the video! (Note: I only watched the first 2 minutes and 30 seconds, as I was able to find what I wanted quickly!)

@jeepmoab1 6 жыл бұрын

Thanks so much. I'm in the middle of re-doing a 64 and this video i'm sure just saved me a lot of headaches! I appreciate people like you taking the time to video your projects and post them. Thanks

@kathiehires7416 6 жыл бұрын

Thank you for the video. After watching your video, I was able to go right outside and replace the vent window in my 65 C10! Also, your comment on Classic Industries led me to find the felts I have been looking for!