How to reset the ecm or computer on 07 f 150 5.4

[@ADHD_Gamer]

Thank you for all the confirmation comments. My first thought is when you're jumping a positive and negative there was going to be Sparks and all kinds of 4th of July fireworks. Seeing how everybody has done it and even had solutions presented because of it I feel much more confident. By the way I love your video because the way it wasn't planned out it's just like having my neighbor show me something.

[@davidallain1729]

Wow! Amazing. I couldn't find anyone who figured this out till now. Thank you.

[@bobslawnserviceplowing282]

thanks

[@curtis3653]

POS 5.4 😆😂 I've got 240K on my 4.6 so I "can't" call it a pos just yet....lol thx for the good info I'm gonna try this on my 4.6!

[@auburneverything980]

Perfect in my book , short and to the point

[@celticwarrior4389]

👍! I thought I heard a Pull Tab when you disappeared to get the Screwdriver. My 5.4 has 340k and will still Hook my Boat to it and take off.

[@CasperTheFriendlyGhost777]

Thanks trying this before replacing my pcm !!! I have a 2010 f f150 same engine.. I get the wrench light and gets stuck on 3rd gear no power and hard shift from Reverse to drive.. any other tip for this?

[@Brobby-tv1eg]

Is the positive still connected by

[@Godbodyent.]

I put the negative to the positive while it was still connected 😂😂😂just joking Givin u a comment thanks bud✊🏿✊🏿

[@savageprincess2823]

Does this work for a 2011 ford f150

[@GustavoPerez-xt9so]

gracias hermano un abrazo desde Venezuela

[@TheWhiteGuy82]

"Comeon, ya prick!" I loled. Much tamer than me working on my truck and I think nobody can hear me.

[@cbly]

I get so frustrated sometimes I make up new words

[@glenbrown4075]

After I charged the battery on my 2007 5.4 Triton the theft alarm red light was flashing and another blue light on the mirror was flashing ten times faster than normal. Battery would turn the engine fast but no spark. I tried your suggestion and it started immediately.

[@cableguy43309]

Thanks, I'm gonna try this on my 04 tomorrow, had some issues with it. Happy New Year and Take Care !!

[@bobslawnserviceplowing282]

thanks

[@gottahavegoalsset]

How did it go with your 04?

[@cableguy43309]

I think it worked; I'm still driving it.@@gottahavegoalsset

[@trumanhawkins]

i know i got a miss fire but i had changed both of them and did this too and still didnt work on my 04 @@cableguy43309

[@donking8662]

Any advice on 04 f150 5.4 idle off when both camshaft position sensor plugged n ....?

[@TwoStageTrigger]

Does my pcm drain if it's been sitting on my toolbox for 2-3 weeks?

[@BigTonyy68]

After changing the battery does this need done ?

[@Jacko_laturn]

If I change the ecm would I do this for the new one I put in?

[@gmailuser3247]

You would have to reflash the new one if it's not thhe exact same

[@fernandomedina5552]

If mi computer its on mal funcion or bad. Did i have program the new one and the key also?

[@tomhobel]

Can u use jumper cables as long as it doesn't touch anything or do u need a wire with those alligator clips ...if so what gage wire?

[@bobslawnserviceplowing282]

might be a little big but should be ok.

[@jimdomi6206]

Bob's Lawn Service & Plowing what gage is that jumper wire anyway? Looks like 12 or 16?

[@bobslawnserviceplowing282]

12 or 16 would be fine

[@jimdomi6206]

Bob's Lawn Service & Plowing cool thanks for getting back so soon .. I'm in the shitty snow removal business too...i look after 21 houses with the blower,,another storm headed our way today ,,,im in Toronto Canada

[@gmailuser3247]

It is the same as removing batt out of truck then touching both pos and neg together this drains the Keep Alive Memory KAM capacitors no sparks or damage there is no pwr hence battery removal

[@mariobombin219]

What I need to do that if I was replacing my timing. Cam phasers oil pump the reason I'm asking is because I replaced all this it runs fine as soon as I throw it and drive it starts to misfire and I'm wondering if the computer could possibly be the issue cuz I have checked the timing twice

[@rafaelvincent7670]

Pro tip : watch series on Flixzone. I've been using it for watching lots of of movies recently.

[@daxtonrogelio5072]

@Rafael Vincent Yea, have been using flixzone for months myself :D

[@crankbaitbaron7565]

How about if you put on a new alternator

[@jerryjamify]

I did this today and it started running better but I drove it 50 yards down the road and the gas pump stopped working, put a new pump on still no start, checked for power at the pump and it's got power, been working on it all day, I'm totally baffled, any ideas would be appreciated, I checked and inertia switch and it was engaged to work properly. It's a 1997 e150 van

[@jae2472]

Bad ECU maybe

[@otisgibson4346]

How do u get the computer to power everything back on it won't crank and there is no code reading when u scan the computer

[@kinghulk4142]

I have a 04 5.4 tritan and I've replaced the cam sensor twice and the engine light still on.ive driven it over 200 miles..so fusturating.will this help?

[@simplymagikranch2366]

I'm in the same boat. First told I put bad sensors in then told I have to take the truck to ford to re program the ecm

[@bladetherapy3797]

Great information, thanks for making, subbed

[@jerrybrown5738]

thanks for the tip trying it now replaced my coil packs yes all 8

[@portrait1001]

You have the option to just replace the bad one or so. That's the beauty of individual packs

[@davidbaros3618]

I have the peice of shit triton! And just got my throttle body replaced,and of course the Mechanic i took it to doesn't know how to relarn it! So now I'm at work shakeing lol but ty sir for the info

[@ericclark2440]

Hello Bob Good info video, but will also work when install of phazer blocks. I heard that the ecu needs to be flashed to eliminate the VCT solenoids. Will what you just did in the video cause the ecu to fash so that the VCT solenoids are no longer working??

[@Texpete88]

No it will reset them but they will run next time you start the truck. You have to have the truck tuned to forget the VCT solenoids.

[@lesleyharrison7068]

I don't know where all of these yeah Bob comments are coming from but I tried this ,like an idiot, and almost caught my F***ing truck on fire!

[@AngelCintiaRockgirl]

Thank you, I'll get on mine correctly.

[@veneno276]

Hello, how was yours? Did it work????

[@brianandersson3798]

Will be doing this the person I own my vehicle apparently drove it like shit

[@jegernovabos9495]

It is applicable for Kia Picanto 2006 model?

[@bobslawnserviceplowing282]

sorry, don't know that.

[@jaypence1911]

What about when replacing cam chains and guides, local mechanic just did that and it still doesn't run right, i have an 07 as well and they just keep throwing parts on it except for the right one!

[@bobslawnserviceplowing282]

i'm done with FORD, just bot a new chev

[@dannieworkman5581]

Same boat

[@jackburch3350]

Can't you just take the Positive off and leave it off for an our to do the same thing?

[@derekkoster7635]

That a f-150 ? Plowing with it ?i was told I couldn’t

[@veneno276]

Hello, thanks for the video, this needs to be done every time we replace sensors too? Like transmission speed sensors?

[@bobslawnserviceplowing282]

i would thing so.

[@tomrussell1914]

Half way through and he’s still trying to disconnect the battery…

[@ViSion3.14]

Mines said misfire cylinder 5 I fixed it and it’s seems to misfire

[@Mdw7375]

I changed spark plugs because was giving off code for plugs and one coil pack. Now its idling bad and throwing off code for ecm . Gonna try this in morning. Hope it works 08 lincoln mkz

[@bobslawnserviceplowing282]

to times my truck was idling bad, and missing on the hi-way. went to my shop i use and they scanned it and found bad coil. they have a snap-on scanner. only use Motorcraft coils, I know they are spendy but I tried all the others and they fail.

[@bobslawnserviceplowing282]

let me know how it goes. thanks

[@ricepadi29]

Nice. My buddy told me about this years ago but I don’t currently have a Ford but still good to know. What do you think about the triton motor? Just kidding! Love how you start your videos by the way.

[@bobslawnserviceplowing282]

thanks, man.

[@andrewrose8344]

Nice one

[@680mudman]

Thank you sir!!

[@danielodonnell6334]

My 04 Ford f150 PIECE OF SHIT needs this done

[@tomariorowe7567]

Thanks! It worked to get my engine light off now let’s see if I can drive long enough to pass the test and keep it off...

[@charlesrosaly]

Thanks!

[@eliezermercado4691]

All the video was about removing negative battery terminal and the best part was the mix goat-cow laugh, ja, ja, ja, ja, ja,.... 🤬🤬🤬🤬😡😡 believe me he sound like a very professional engineer Technician.

[@billphil8235]

2007 is not a Triton engine

[@timherendeen3302]

I had my antitheft lock me out.

[@jebediaagnew4429]

Swap it out with,an electric motor.

[@crankbaitbaron7565]

Didn't work

[@2Cheap4society]

You should not just Wing your videos.

[@jackcollin2476]

Duh

[@adrew1963]

Is it really a piece of shit

[@derekkoster7635]

This was annoying

[@mastercreamer1398]

Jesus dude

[@murtastic]

If you remove the pc module would it work too?