How To Restore a Damaged Knife?! | Jason Knight Knives

Website - www.knightforgestudio.com
Patreon - / knightforgestudio
IG - @jasonknightknives
FB - / jasonknightknives

[@paullmight42]

I love Jason's utter lack of patience for dumb people....I feel much the same way hahaha...

[@MtPhillipMetalWorks]

Good stuff Jason slick little blade

[@aidenonfire]

❤ love your work

[@jeffreydauterman]

Awesome stuff. Hate to see the carnage in the trailer but happy you were able to save that beautiful piece!!!

[@richardschneider4775]

when you start out with a good knife a great knife is not far behind

[@joelpa4638]

THAT BLADE IS BAD BAD TO THE BON CRAZY COOL AS IT IS🥶😎😲👍👍👍👍👍👍👍👍👍👍COOL FACTOR

[@evilshenanigansblacksmithi9612]

Happy to have new videos from you! Fantastic knife as well.

[@markbarrett5516]

I like the knife. I'm actually working on my 2nd knife and it somewhat resembles yours in profile. Of course your knife making has been very inspiring to me. Thanks.

[@jeremynedrow7003]

I can't stand how you can't speak your mind without being worried about people's feelings. I guess i was brought up in a different way.

[@razorbackfabien3057]

Love your video man ! Crazy work as usual ! 🤙🍻

[@rubenbunyi8356]

the knife is a "born again" knife. nice.

[@charityheurter3321]

This was very cool to watch!! Love the finished produ....I mean knife! 🙂

[@MASI_forging]

That's really good. 👍👍 such a great work dude. 👍👍

[@Tezza120]

Pay full attention...ok brain you must defeat the adhd and focus!!!

[@justingoodman5600]

Nice to see someone pull that off. I just failed. No bolster on mine and I screwed the pooch on one scale. Guess it’s time to find out how strong G-flex is😢

[@jermoydegraw5375]

Bad ass little knife...never used moose antler before but now I want to! Good stuff

[@draven86]

Very nice work on the knife Jason. I still have a cup hilt rapier i have to restore but luckely it's almost vacation time so i have time to finish it. I still have a lot of clean up work to do on the hilt and i have i make a new cross but this video inspires me to finally finish it

[@WILLYSCHNUCK]

That blade turned out So purdy! Thanks for sharing your amazing skills!!!

[@dude3291683]

This is a seriously great video! Odd question how do you restore chipped blade edges? I do not forge blades and I have extremely little knowledge on grinding. Any help would be appreciated.

[@86sportyguy1]

Very cool knife! Looks super handy

[@aaronkokesch3593]

OMG!! I feel so triggered you only went to 400 grit on that knife. How dare you!! LMAO! Had to be sarcastic and poke some fun. Absolutely beautiful work and I am always blow away by how beautiful your knives are. Thank you for helping push the maker movement with your videos. In the process of making a forge for myself to mess around some. Not sure if I will start doing knives or blacksmithing other items instead. I am mostly looking forward to making myself tools for use in my future projects.

[@garetkonigsfeld2]

This video makes me want to leave work and make some knives. Thanks again for the inspiration.

[@carrestore]

beautiful restoration

[@ahiraband3939]

Looks nice.

[@bobgore1962]

Always a pleasure learning from you, my brother! Thanks for sharing! 😎👍🏻🔨🔥🔪

[@Cetrifuga1945]

Bell coltellone da bosco era bello più corto 👍

[@laurenbryant647]

It is so nice to see your videos! This was very cathartic to watch and inspires me to make time to get back into the forge. Also there's some cool stuff in that trailer of doom! Great work as always, thanks for being unapologetically you.

[@imsim6064]

i love what you did with that knife. That thing would live on my belt for many years if i had it. Great video!

[@leonardmettlach2614]

Finally made my version of your chopper design , used 3/8" steel on 10" blade , came out freekin awsome , my favorite knife i have made so far , been forging since 1st day forged in fire came out, love your designes mine are pretty similar

[@ChrisMcClure-n5d]

Jason, you’re probably gonna cuss me like a dog, but I was wondering if you could teach us how to make an integral knife such as that just using hammer and anvil I know that would be a lot of work, but it sure would be interesting and by the way, I normally don’t comment a lot Because I’m scared I will say something stupid but I promise you everyone of your instructional videos. I guarantee you I’ve watched them 25 or 30 times each and still go back and watch him. It’s not gonna be long and I’m gonna start being a maker and I’m really excited and I owe you a lot, just buy your instructional videos

[@Suayrez]

🔥🔥

[@ChrisMcClure-n5d]

I see now that it is a integral, beautiful knife brought back from purgatory

[@ChrisMcClure-n5d]

I see now that it is a integral, beautiful knife brought back from purgatory

[@stevealford230]

You have lost your mind, brother... an elk is WAY bigger than that... they're like a thousand pounds and covered in hair. Also, *unhinged screeching about how you MUST do 72 hours of hand sanding up to 0.25 micron*

[@stephk5255]

Any of those "junk" blades you want to get rid of, I'll dispose of them. I'll even pay the shipping. 😄

[@franotoole2702]

Sweet save. That handle is crying out for some scrimshaw work🙂

[@rdl628]

I very much like the knife. I just live a couple miles down the road from you, do you ever have visitors without appointments.

[@adityaagarwal6719]

i am new to this and i had a question, how is d2 tool steel for chef knife, i don't mind the lack of stainless properties.

[@garetkonigsfeld2]

I really like the polish bloster with your not so favorite hand rubbed finish.

[@johnblanton-fd3jf]

Great " roundtoit" knife ! What shop doesn't have a pile of roundtoit's lol

[@henkvandebeek7921]

Oh my gosh! I am so triggered! Here is my stupid comment 😂

[@LeonardAnny-xd3je]

My first comment on KZbin ever trying to get better at this stuff love the video

[@ChrisMcClure-n5d]

Jace was that little knife, a integral

[@darnellnepia1629]

Sweet knife. Give you $50 for it 😇

[@mrtrapper93]

Buy that one from Ya! Wadda ya say?

[@hovan2yourjunk]

Is that a Microtech in your pocket?

[@JasonKnightMS]

Yes it is

[@hovan2yourjunk]

@@JasonKnightMS 🤘🏼🤘🏼

[@dwaynewallace306]

Hell I'd buy it looks good

[@ChudGippity]

Finished Tool ❤❤❤

[@MrSatyre1]

I don't know?! How do you restore a broken knife?! Please tell us?!

[@JasonKnightMS]

Damaged.

[@tammyjo9]

👍🏻🙂

[@jackhetherington2291]

Sweeeeet!!!

[@lamarwhittemore6166]

Promo-SM 🤔

[@davidlargen6945]

Looks really nice the way you finished it

[@stevenpress6650]

Very cool

[@johnmeans7077]

after all the grinding - is the heat treat still good ? did the heat generated by the grinding do anything negative to the blade? i have many i need to do this to. but as they are handled already, i didnt think i could do this without re heat treating them.

[@esnyd]

I grind almost all of my knives after they are heat treated. You have to pay attention not to over heat the steel during the process, but as a general rule, if you can hold it, it's not too hot. The glue on the handle would let go before he ruined the temper.

[@johnmeans7077]

@@esnyd thank you for your response. i feel i can proceed now like this with better knowledge .

[@the_real_toji]

​@@johnmeans7077have a bucket of water nearby and dunk it after each pass on the grinder to be safe. The edge can easily get ruined if you get carried away with grinding.