How to resync key fob for central locking

quick video on how to 're sync your key fob for remote to work the central locking once you've replaced your battery, this is on a Vauxhall movano mk1, same as a renault master and with probably work on clios etc etc

[@paulmoran4907]

Mate, you're a star, this has been buggin' me for months, Cheers buddy.

[@fionascott5492]

Thank you! So nice a British guy, you get straight to the point. You've helped me so a massive thank you 🙂

[@seanatkins5948]

Absolutely brilliant mate! Thanks alot🎉 Worked in seconds with my Renault clio👍

[@lr7486]

Thanks for the video! Worked for my '98 Clio

[@tg9135]

This worked for me - sourced from Vauxhall Corsa (2012) Owner's Manual-page 20. The problem with this car being that the remote did not lock or unlock the driver door while locking and unlocking the passenger and boot doors. >> 1: Ensure the car is locked prior to steps 2 to 7. 2: Take note which way up the remote battery is facing then completely remove the battery from the remote fob for about 60 seconds. 3: Replace the battery. 4: Take note - Once the battery is replaced do not use the remote to unlock the car. 5: Use the key to open the driver door. 6: Insert the key into the ignition and switch on. 7: Switch off and test. * * * Note: This will not solve the problem if the locking solenoid (an electro-mechanical device) is faulty. This can be tested by locking the doors from inside the car via the internal lock button - insure the lock button is illuminated - then opening the relevant door window. Now test if the relevant door can be opened via the the external door handle. If the door opens while the internal lock button is illuminated and the external door handle is operated then the locking solenoid is not engaging and either needs replacing or determining if an electrical fault is at cause. (it is assumed that the other doors operate without fault). Here is some addition info that may be of interest >> Vehicle Customisation/Personalisation From Vauxhall Corsa (2012) Owner's Manual-pages 92-93. 1: Insert the key into the ignition switch without switching on - the ignition must be off and no lights illuminated on the miles display. 2: Pull the signal and wiper levers towards the steering wheel until a confirmation beep is heard. 3: The miles display will display a P(+ number) follower by off or on. 4: Pushing the signal lever up or down will scroll through P1 to P7. 5: Pushing the wiper lever up or down will toggle the relevant P(+ number) on or off. 6: The P(+ number) customisation are as follows: 7: P1 - ON: Switch on the external lighting using the remote control. 8: P2 - ON: Automatic rear windscreen wiper when reverse gear selected. 9: P3 - ON: Lane change indication: three flashes when the lever is moved slightly. If the lever is held longer the indication flash is - as normal - continuous until automatically or manually canceled. 19: P4 - ON: The driver door will unlock with one press of the remote but the passenger doors and tail-gate will require an additional press of the remote to unlock. This security feature will prevent unauthorised entry to the vehicle via passenger doors and tail-gate when the driver door is unlocked. 20: P4 - OFF: All doors including tail-gate will be unlocked with one press of the remote. 21: P5 - ON: All doors will automatically be locked a short while after unlocking if no door has been opened and will automatically lock all doors after the car is driven as short distance provided all doors are completely closed. 22: P6 - ON: A particular maximum speed can be assigned. When this speed is exceeded a warning buzzer sounds. 23: P7: Adjustment of the volume of the acoustic turn signal.

[@JS05]

Saving lives! I spent years without the key working :D

[@sweatyhelmets1245]

damn that worked !!!! now got two sets of working keys , thank you !!!

[@Monner222]

You absolute diamond mate cheers! Mine stopped working on my 2004 Vauxhall Vivaro so thought I'd try it and it bloody worked hahaha cheers fella have a good day 👍

[@andrewallen1748]

cant get it to work on my 56 vivaro for some reason :(

[@scotthunter7060]

Worked on my renault master van, cheers.

[@fpv-europe]

Thanks, this fixed my issue :D

[@abemarais1292]

Mine is working Now...thx for the help 👍

[@lost8726]

It worked on my clio😅 Thanks bro👌

[@robertfulla6537]

Brilliant used on a renault clio worked straight away

[@michaelnielsen5442]

It worked!!! Thank You!!

[@Jan-bh6dz]

thank you guys it helped me out

[@hrvojemilic744]

Worked ty very much man

[@marcass100]

briliant. thanks mate

[@Helen-ud8fd]

You are brilliant. Had my Volvo 3 months, without central locking. I think I love you😂 Also need a spare key and fob to programme, dealers too expensive, any ideas?

[@luckyluke216]

You legend ❤

[@saudadedevocelira3823]

What battery do you use for the CR 2025 remote control? thanks bye

[@johneyreguitar]

I will try it now...

[@ADE1ADE2ADE]

I tried this on my vivaro 64 plate. I had to leave the driver's door open to get the button to go into full red ( learning mode). Don't know if this tip would have worked, as I later find out the guy who installed my new battery left the battery protection sticker on the battery.

[@krisztian9148]

Could you let me know how can i reprogramming my 2nd (spare) key? If i do, my car car forget the 1st one (main key).

[@mary-ann541]

Was there a code you had to input anywhere?

[@bozidarboric9328]

tnx

[@aziztaounate8670]

Does this method program a new key? . Thank you

[@kolrobi]

Jesus no, if programing a new key would be this easy, stealing a vehicle would be just as easy. This method just re synchronise the central locking.

[@palbenjaminvizi3612]

Hey! After I changed the battery the central lock was gone. But this video solved my problem. But what is also gone is the central locking after the the vehicle starts moving and the central lock not lock the doors. Can somebody help with that?????

[@jozefroman2110]

I will try on Clio, if it helps will give you a thumbs up 😀 EDIT: doesn't work on Clio 2, 2002

[@misslaracom1]

doesnt work on my movano. tried dozens of times.

[@waynedl99]

Doesn't work on mine, holding in the central locking button doesn't activate the programming mode 😢 Anyone got any ideas? Mine's a 2004 master 2.5dci - if it matters?

[@awheeleygoodlife9720]

Mine neither... Did u work it out?

[@waynedl99]

@@awheeleygoodlife9720 not yet

[@misslaracom1]

nor mine

[@irfaanmukadam8308]

It's only work on Clio one not on clio2