Rewire Hills Folding rotary clothesline. We rewire and install new clotheslines in Sydney, Blue Mountains and central and south coasts.
Пікірлер: 132
@Maylands67505 күн бұрын
Fantastic video and made this job so much less daunting than I heard it was. Thank you.
@ChanelBlaeser Жыл бұрын
I live in WA, and the sun annihilated our plastic line to the point of it snapping when putting a wet blanket on it to dry. My partner does FIFO, and putting a new line up seemed like some sort of aerospace engineering until I watched your video. Thanks so much! Your video really helped me!🎉
@australianqualityclothesli8250 Жыл бұрын
Trust me, it is aerospace engineering🤣🤣🤣.
@user-js8kp6jo5m8 ай бұрын
Thank you for this Outstanding Tutorial. Just rewired our hills hoist following your clear & concise instructions. A wonderful contribution to the environment enabling people to prolong the life of this beloved household equipment. I will definitely recommend your company to anyone in need of a clothesline given your ethics, care & professionalism as shown through this video.
@jbakersutube Жыл бұрын
Thanks - great video, I still can't believe I only needed to watch this just once to complete the job. My only added advice would be to squirt a little WD40 in the top of the tensioners before attempting to loosen them as I cracked one on my first attempt - after 24 years in the sun and weather they've gone a little brittle and rusty. Thanks again!
@MrHitchikerOz Жыл бұрын
Brilliant lesson, I now feel like a pro line re-stringer. Couldn't have done it without this info!! I got to the end and found that I had the special tool for re-tensioning, it was clipped onto the old line. Many thanks once again.
@zoewheat5119 Жыл бұрын
Excellent step by step instructions. We followed carefully and are really proud of our professional result. Re-wiring my old rotary hoist has saved me heaps of money.
@wendydawes47942 жыл бұрын
Thank you sooooo much. Just redid mine after pausing and playing 100 times 🤣. Was just like having my dad giving me instructions…THANKYOU 👏👏👏👏👏👏👏👏🙌🙌🙌🙌🙌🙌🙌🙌🙌🙌 PS…. I also found the screwdriver tightening part beyond me but I persevered and kept rewatching how you help your screwdrivers until I FINALLY GOT IT 💪
@elizadances5 ай бұрын
Clear instructions and excellent demonstration - every step accounted for! Thank you for providing this, I now have a refurbished line 😊
@victorking22222 жыл бұрын
I found using long nosed pliers a lot easier than using two screwdrivers, only have to use one hand, plus if you are using plastic covered wire (160lb) it is useful for removing any broken pieces that are stuck in the tighteners
@grekiely62459 ай бұрын
I found that as well, with the long nose. Excellent example for rewiring.
@Maylands67505 күн бұрын
Me too. That and WD40.
@russellgodebye38732 жыл бұрын
Many thanks. I got in a proper tangle about 2 thirds of the way through running the line. Suggestions - The tensioners only turn clockwise (when re-aligning after removing line) I used the tool supplied with my angle grinder and it was perfect for turning the tensioners (like it was made for it ! Thanks again it would have been far harder without your great video.
@michaeldunne1746 Жыл бұрын
Made me look good and, more importantly, my wife happy. Great easy to follow video.
@brush19603 ай бұрын
Without the video i would not been able to do it cheers happy wife happy life
@paulmowen2354 Жыл бұрын
Thanks so much for this quality video. It really helped. I would never have got such a good outcome without you help. Thanks.
@kevingreen828 Жыл бұрын
Thank you, this video just saved me restringing my line.
@binc78 Жыл бұрын
Excellent video. But i have a question. what did we do with the first 400 cm hanging out in the beginning of re-wiring? is that still hang in there? what is thr purpose of it?
@jonf66 Жыл бұрын
Brilliant! Looked easy and when you follow the instructions it was easy. Thank you very much
@lynrheynolds33212 жыл бұрын
Thank you. I now have a new clothesline after 20 years.
@lukeadorni74714 жыл бұрын
I've been dreading restringing my clothes line. Your video really helped, I now have completed the job and am very happy with the results. Thanks for making and sharing the clip
@guyo98683 жыл бұрын
Great video, well done. Re-strung my clotheline today with the help of this video. Thank you!
@steveclapton52663 жыл бұрын
This was an outstanding tutorial. Thanks muchly for taking the time to put it together! I winged it last time I did this job and it took me forever to get it right. This time, I was done in about 30 minutes tops, and not a single problem! I tip my hat to you good sirs, many thanks. EDIT: and as Scott Fanning mentioned, needle nose pliers was my goto tool for turning the tighteners. Just seemed easier than 2 screwdrivers :-)
@alltech39872 ай бұрын
Thanks bro. Just finished one appriciated 🙏🏽🙏🏽🙏🏽
@scottfanning744 жыл бұрын
Really great tutorial. Thanks very much, it helped a lot when I rewired my hoist today. I found screwdrivers quite difficult to use on the tightening system, so another tip is to try some needle nose pliers - also seemed to work well. Thanks again!!
@Deaneller2 жыл бұрын
Thanks so much. Just finished reeking my hoist thanks to your tutorial. 😊
@Terminated-tg8dv5 ай бұрын
Thanks for instructions. Would of been stuffed without watching. Legend work mate
@takamespn2 жыл бұрын
Hills should hire you to make videos for them! This was exactly what I needed (I wrongly assumed the new line would be looped, so had to untangle it half-way through - should have laid it out like you suggested first)
@drumtingАй бұрын
Superb video, really useful 🙏🏻
@phillipbrown38292 жыл бұрын
Excellent tutorial. Thank you so much for your help. It was easy to follow and in the end it all worked out well and I think easier than I expected thanks to your tutorial. Have a great day.
@maryknightsriders65543 ай бұрын
Thanks very much for this tutorial. I'm in SA. The instructions I downloaded just didn't have the details on how to undo those clips. Your video saved the day. Much appreciated!
@oddsocks19533 жыл бұрын
Thanks, I’ve been worried about attempting this task. Your video of attaching the new line to my exact model of Hills Clothes line made the job a breeze. I used the chisel method suggested on one of the other reply’s. Thanks again for a very informative video.
@matton363 жыл бұрын
Thanks. For anyone who is interested i now give out new Hills Line tension tools for free for anyone who orders a rewire from me in Sydney. Never have to use a chisel or a screwdriver again. Thanks for your comment.
@goparra093 жыл бұрын
Thanks, I rewired my line today and then found your channel. I did well.
@debbiekosadias2034 Жыл бұрын
Thanks so much for this very easy to follow video. It made the daunting task very achievable. I just need to try and tighten a few more on my very old clothesline
@walkthedogfit3 жыл бұрын
Thank you !!!!! I have hand strength issues so I found a flat chisel with the plastic protector that was the perfect fit and it worked like it was made to work!
@shanarumugam24172 жыл бұрын
Fantastic how-to-do video. Thank you so much!!!! You are a legend mate!
@petersquire42134 жыл бұрын
Needed to solve a problem and you fixed it. Thank you for making an instructional video that was easy to follow and so complete in addressing the task.
@christypotter65582 жыл бұрын
I really appreciate for this great video. I successfully rewired my clothes hoist today. Luckily we still had the tightening tool that came with the original wire. Thanks again
@gabdawson33214 жыл бұрын
Fantastic! Never tried this before but your video made it a breeze!
@joannemurray36282 жыл бұрын
Excellent tutorial. You explained very clearly every step of the process. Now I'm confident to go ahead and do mine. Thanks very much.
@roydonthomas2 жыл бұрын
Great video, helped me get it done today. Remember though, you need the 60m roll. I found out the 30m is too short.
@omsivaya20092 жыл бұрын
Very good video tutorial. Thank you. Followed your precise steps and worked out great.
@jackmanhart69092 жыл бұрын
Fantastic video, clear and well presented/filmed. Highly appreciate this sort of content, will be getting my next line from you, thank you.
@emanuelgalea24247 ай бұрын
This video helped me, it was very informative thank you very much.
@potatothistle2 ай бұрын
great tutorial. cheers!
@Thieni12 жыл бұрын
Brilliant. I would have made a mess of it without your video. THANK YOU!
@idodido14 жыл бұрын
Great video, very helpful thank you...Guys a quick tip, if you find screwdrivers hard to use in this exercise (same here) a small adjustable wrench does the job way to easy.
@susanwalsh3878 Жыл бұрын
Thank you for the KZbin video. Very helpful, we are regional so no re-cord operatives in the area.
@rosaliekraljevich21586 ай бұрын
Great demo. The best! Thanks.
@jameshardiman93826 ай бұрын
Brilliant, very useful. Thank you!
@jobrown81462 жыл бұрын
Thank you. This video is very much appreciated.
@lynnetresider69102 жыл бұрын
Thank you, had no problems, easy to follow.
@kevinlee6363 Жыл бұрын
Thanks for the info, you did it in 8 minutes it took me 45 minutes 😀
@angelograsso64253 жыл бұрын
Thanks, a great help when rewiring my 20 year old foldaline plus hoist
@mellinden48314 жыл бұрын
Thank you. Easy to follow instructions.
@roblockwood1162 жыл бұрын
Great, easy to follow video. Thanks.
@grekiely62459 ай бұрын
Thank you for your excellent tuition example, appreciate it. Had to watch a couple of times for the old brain to "cotton on" but that's me.
@garrysmith7217 Жыл бұрын
Thanks guys. Not a difficult job but made even easier with your video. I had no trouble using 2 screwdrivers to tension. Certainly not worth spending $20 for the tool from Hills.
@helenhartley71413 жыл бұрын
Brilliant video! Thank you!
@stevelogue95853 жыл бұрын
Very helpful thank you.
@ABWoodwork2 жыл бұрын
Very helpful tutorial! I now have a problem where the clothes line wants to fold up all the time. I did finish it in the dark so maybe missed something along the way 🤣
@matton362 жыл бұрын
Your button (normally orange) that collapses your hoist is probably broken. You can buy new ones on ebay or you can put a tek screw through the lower star into the column to stop it collapsing but thas is a permanent solution until you remove the tek screw again.
@Koch82 жыл бұрын
Excellent video
@jayvee27922 жыл бұрын
Fantastic ⭐️🤙🏼
@tonilrankin23 күн бұрын
Thank you so much. 😊
@user-qe3bz3rk5b11 ай бұрын
good one Aussie helped a lot
@frankdesa9486 Жыл бұрын
Thank you! Agree re long nose pliers for tensioners.
@tracywodonga81122 жыл бұрын
great video! That is a short clothes line! I am 175cm tall and I will need s stool to do this!
@jobrown81462 жыл бұрын
I'm only 152cm / 5 foot and my clothes hoist has been put in as low as it will go so I can reach it easily for pegging out the clothes. I'm hoping that I don't decapitate myself if I stand on stool and duck when rotating it. I have a bad knee so I don't want to be stepping up and down all the time. I might have to rope (yes pun intended) daughter into helping me.
@sklorr20004 жыл бұрын
Great video. It really helped me. One of my tighteners slightly broke on the early steps and the cord took about 1.5 hours to unravel, but your video made it all so easy. Thank you very much!!!!
@australianqualityclothesli82504 жыл бұрын
We have used tensioners we supply with our rewire service. I know about the unravelling of the cord, can be a pain at times.
@debbie5892 жыл бұрын
Thanks that was great help.
@ZackAlford-mk2wp37 минут бұрын
Great video covering the important details. WD40 definitely useful in prising out the old line. Bunnings in Thornleigh cant get the end cap line tensioner from their supplier. Any suggestions? Its for a Hills Every Day 6 hoist. Thank you.
@saiprashanth19714 жыл бұрын
Thanks for the video. Very helpful. My clothesline is not locking in place, looks like something inside the crossing kit is broken. Does the crossing kit have some kind of locking mechanism to hold the clothesline up?
@matton364 жыл бұрын
If its the same model as the one in the video there is an orange or sometimes blue button that holds the arms up. Its quite common for these to break. We have these but we only supply them with our rewire service. Theres a guy in QLD, not sure where he is who you can buy new ones from.
@iantheo1424 Жыл бұрын
Great video and discovered tensioners only wanted to turn clockwise after completed job.I was able to thread cord through getting partially open also removing one and fitting in a vice. It now is zip tied down to arm untill I can get a new one What do you do with the 400mm length at the beginning?. At least I wont get strangled now on low hanging cord.
@eyeinthesky9929 Жыл бұрын
The special tool only costs a few bucks, its just a plastic key with a few bumps on one side and a central strip on the other side to turn. Then you cannot accidentally stab yourself with a screwdriver; it does take force to turn and tension. I also needed multi-grip pliers to re-install the last two end pole line locks, but it was apiece of cake with them.
@user-kk3os6sw5w Жыл бұрын
Great video, but it's a little more challenging with the cat helping!!
@captainmort Жыл бұрын
Thanks for the video as I am about to record mine. When you initially started you fitted a arm tie then went in 400mm for the knot and at the end of the video this bit was still hanging. What happens to the 400mm of cord?
@australianqualityclothesli8250 Жыл бұрын
That hanging bit has the hook on the end as shown in the video. It wraps around the clothesline when folded up so the arms dont try and open up when the clothesline is being carried. Hope that helps.
@petermurphy3354 Жыл бұрын
Hi Matt, mine doesn't have the tensioners discs, must be an older model Hills foldup. How do I tension this one? Cheers Peter
@aarontate1861 Жыл бұрын
Will do this today 😁 great video. Just one question? When you started you threaded the line through the clip, then tied a knot 400mm in. But at the end the clip is still hanging? Where does this go?
@matton36 Жыл бұрын
The dangling bit is to wrap around the clothesline arms when its folded up. If you dont want it, delete it.
@RoMiTouring4 жыл бұрын
No tensioners on mine, so is there anything 'extra' I have to do, is it just a little easier.? Awesome vid.. thanks so much!
@matton364 жыл бұрын
Hi Ross if yours doesnt have tensioners, and some dont, just tighten it the way im tightening the one in the video where i pull the line down and work my way from the inner beginning to the outer end. Just pull a little tighter on yours because it doesnt have tensioners. We can rewire it for you if your in Sydney, South Coast, Central Coast or Blue Mountains.
@matton364 жыл бұрын
Rewire it the same way as i did this one just make sure the line is tight enough.
@grantfoley38744 жыл бұрын
Legends! Unlike other KZbin tutorials this is straight to the point and easy to follow. Well done!
@bramall74334 жыл бұрын
Hey Ross - ideally you need to use 8 ratchet tie down straps (2 on each arm) to tension each arm in 2 directions perpendicular to the resultant sheer force tensile momentum coefficient. tension depends on what material the cord is made from. Nylon has the least frictional coefficient 0.23 and stainless steel wire the most at 2.89. Its not rocket science but for a full appreciation of the forces at work in your aussie clothesline see www.CSIRO/physics_equations@Hillshoist.com
@gregglew65642 жыл бұрын
Great help. Mines older unit but I know what to do. Q.. What do I do with the 400mm and hooked end attachment at the start of line ? Thanks
@KimKimNim2 жыл бұрын
Exactly my question.
@waynej68452 жыл бұрын
Its for if you need to fold up your clothes line and the 400 mm holds it together
@loubot33326 ай бұрын
thanks for this - fantastic video :) One question - I could be wrong but if you feed the line in clockwise and then anti clockwise direction (for each new 'lane' of clips as you work your way around) the tensioner discs will not operate as expected since they only tighten in ONE direction - clockwise. This means that in the sections where you ran the line anti clockwise you'll actually be loosening the line (or at the very least not achieve anything at all) if you attempt to turn the tensioner disc in the default clockwise direction - is this correct?
@australianqualityclothesli82506 ай бұрын
It makes no difference at all what direction you go because all the tensioners do is shorten the line length, and it will shorten no matter the direction. It cannot possibly loosen. Ive done thousands of these and what i have shown you is the factory correct way to do this, in fact its the same way its done in the factory.
@sydneywalker5516 Жыл бұрын
Great video, hoping you you may be able to help.Trying to find where to buy end pegs as I am missing 2. Any thoughts? cheers paul
@matton36 Жыл бұрын
You cant get them anymore, however i provide good used ones for my Sydney clientele if they purchase a rewire.
@1000514 Жыл бұрын
This is awesome. Only issue I’m having is with the tention. I got the old line out but I’m having no luck moving the discs around. I’ve tried pliers and the screwdriver trick that you do. Is it possible they need some WD 40 Or some oil?
@elaineplew1236 Жыл бұрын
They only turn to tighten don't try to go backwards to loosen but wd40 did help make that process easier for me. Pull out bits from the middle of tensioners with a flathead screwdriver, that was easy mine was falling apart doing that! Pointy nosed pliers were handy during that also.
@matton36 Жыл бұрын
@@elaineplew1236 Only turn clockwise. They can be very difficult to turn sometimes. WD40 can help. The proper tool can be bought from Hills if you need it but try some more muscle first.
@MrMadizm Жыл бұрын
What did you do with the hanging bit with the clip attached at the end?
@australianqualityclothesli8250 Жыл бұрын
It just hangs free for when you want to use it.
@jos64578 ай бұрын
Do you have a video on how to replace the metal wire as I find the plastic string isn't as strong, please
@australianqualityclothesli82508 ай бұрын
I do have a video on rewiring the traditional fixed rotaries however you cant put wire on folding rotaries sorry. It will not work, don't even attempt it.
@peterbilokin78815 ай бұрын
What model is this clothesline?
@scottieg48024 жыл бұрын
Why do you leave the extra 400mm at the start?
@Stllno4 жыл бұрын
Scott Grewcock I could be wrong, but I believe this ‘additional’ length of cord is used to wrap around the clothesline in its ‘collapsed’ state to stop it unfolding.
@matton363 жыл бұрын
Yes, What Stillno said
@bobkolar66456 ай бұрын
The tighteners only turn in one direction clockwise
@australianqualityclothesli82506 ай бұрын
That right.
@Stllno4 жыл бұрын
Awesome video! I tried to re-cord my Hills clothesline with no idea how to do it properly. I will watch this video a few more time and give it another go... failing that I have your phone number. Are you based in Sydney by chance? 😎
@australianqualityclothesli82504 жыл бұрын
Yes, we are in Sydney.
@motothumper55982 жыл бұрын
How many metres of line does it take?
@matton362 жыл бұрын
You will need to buy a 60m roll
@lindsaychugg44554 ай бұрын
I keep getting 40m & its not long enough , its the longest our store keeps on the shelf !
@MarkJaemin Жыл бұрын
Our wire is so rusted that it’s snapped so how to get it out
@matton36 Жыл бұрын
Hard to say without seeing what your speaking about. If your in Sydney i can do it for you. Matt
@drgre42653 жыл бұрын
Don't get 30M you will need 40M of line I had to make up the rest with the old stuff.
@matton363 жыл бұрын
It will take a 60m roll each time to rewire a rotary clothesline. Sometimes your not left with much at all.
@waynej68452 жыл бұрын
Yep. Just rewired with 30 metres and was way short. How annoying
@christiandeininger17908 ай бұрын
@waynej6845 that's what I did today 30m rope not enough
@JasCeeGee3 жыл бұрын
Umm. Final image: “You’re now finished” Otherwise a great instructional video. Well paced and easy to follow.
@joannemurray362810 ай бұрын
It’s not a video instructing you about correct spelling. It’s rewiring a clothesline. Get over yourself.
@waynej68452 жыл бұрын
Got all the way around and ran out of line. Didnt realise that my clothesline has one more line than yours. Grrr
@loubot33326 ай бұрын
same exact thing happened to me today. bought 30 meters and then realised I should have got the 60 meters ; )
@briangarnett5423 жыл бұрын
Can't get any clearer than that.
@dylansmith232410 ай бұрын
You missed so many things we needed to know
@christopherwhippy3181 Жыл бұрын
You saved me 300 bucks for 10 dollar and after following your instructions it's solid af....that's 2 rub and tugs..or 1 rub n tug and 2 cartons of VB.....lol