How To: Samsung Rotor Position Sensor DC31-00098A

How To Replace: Samsung Rotor Position Sensor DC31-00098A www.appliancepartspros.com/sam...
Symptoms: It has gone bad; the washer is not running.
Tools: Phillips screwdriver, 19mm socket and ratchet, flathead screwdriver, 10mm socket and extension, blue thread sealer.
This Samsung made Washer Rotor Position Sensor replaces the following older part numbers on Samsung Washers: 2068316.
Buy the new Washer Rotor Position Sensor DC31-00098A here: www.appliancepartspros.com/sam...
Most orders delivered in 2 business days or less.
If you enjoyed this video, please click the like button. Subscribe to this channel for more appliance repair tutorials.
If you need any more technical advice, call us at 1-877-477-7278 or chat with us on our website www.appliancepartspros.com/. We're available 7 days a week.
For more appliance advice, information, and tips, follow us on social media.
Facebook: / appliancepartspros
Twitter: / applpartspros

[@patrickdubuc3439]

How do u know if it's the rotor position sensor and not the rotor and stator that's bad?

[@aaraujo306]

Curious too

[@calpard7625]

Good video very helpful

[@dishaparikh3645]

Nice. Very detailed video. Thank you

[@gullygus4975]

Will this stop it it from spinning out of control and complete spin cycle?

[@matthewschug939]

It's kind of common sense how to take it off and replace it. The important question is how to test it to know it's the problem. What are the voltages or resistance values I need to see to make an informed diagnosis?

[@matthewschug939]

Speaking as a retired auto mechanic.

[@RichaRat]

Anybody can throw parts at it. I suppose that is what they want us to do.

[@Rockfish21035]

Pin 1 (common) to Pins 3 & 4 (Hall sensors 1 & 2) should be resistance of 10-12 K ohms. Pin 2 is ground

[@amberkondrato5930]

I am having trouble with the bolt. Mine looks simillat but i dont feel notches and cant get a screw driver in to lock it. Tried at the both without that part but cant get enough leaverage to budge it. Mines doesnt really spin or turn more than an inch.

[@jonarikher]

I have a problem in washer samsung WF42H5000AW the error code is tE4, can you help me?

[@sdshawn29]

I have the same stator motor on your video. What should the resistance values be ? I'm getting 11.8, 11.9,11.9.

[@snoopyfix2]

Did you ever figure it out?

[@sdshawn29]

@snoopyfix2 No , the motor looked good. I did not want to go down the rabbit hole. Sold the set to a repair guy who said 90% control panel brain for 300 and bought a new LG set, never samsung again.

[@JaniNomad]

I replaced the sensor dc-31-00098A and the machine is still not working. It starts but it doesn’t sound like any water is coming in. The water is on

[@jasonbirch1182]

Any way to test the sensor?

[@alexdavis7872]

Multi meter cuz

[@Rockfish21035]

Pin 1 (common) to Pins 3 & 4 (Hall sensors 1 & 2) should be resistance of 10-12 K ohms. Pin 2 is ground

[@heatherjohnson3849]

Had a Samsung error e3 code washer stops after wash cycle,,,changed out the position sensor,,,tried it and still no spin,,,,,,what now?

[@appliancepartspros]

We'd be happy to help you out with that! We offer free technical advice and diagnosis. You can give us a call at 1-877-477-7278 or you can chat us at our website: www.appliancepartspros.com/. We will need your model number to give you accurate advice, which you can locate using this tool on our website: www.appliancepartspros.com/modelnumber_locator.aspx

[@sdshawn29]

Getting 3c2 code on samsung washer

[@alainlafrance22]

no spin, no code ?? if the position sensor are defect , can i have a no code ? Yes i change vibrating sensor , an 2 electronic module , and all the wire , ??????

[@VideoVictor45]

Very helpful but how can I be sure it's the sensor? The washer fills and drains, but it buzzes and stalls at the point where the drum should start agitating. I'm not seeing a code. The drum turns freely by hand. So what are the indications that I need this part please?

[@appliancepartspros]

What is the model number of your appliance? Have you had any recent power outages?

[@VideoVictor45]

Yes! It's a WF42H5000AW/A2. What part do you think I need?

[@appliancepartspros]

Have you tried to put your machine into a diagnostics mode to see if any error codes come up on it?

[@ryanarthurton594]

Thank you so much for this video. My rpm sensor went out which caused the control board to burn up (literally). Swapped out the board and rpm sensor for just over $100 total and with a little elbow grease I am back to being Cinderella.

[@appliancepartspros]

Glad we were able to help you out. If there is anything we can help you out with in the future please let us know. We will be more than happy to assist you!

[@aaraujo306]

How did you know that was the cause? Mine is giving a 3e1 error code, it fidgets trying to move with a slight clunk sound, then completely stops.

[@Rockfish21035]

Your stator windings should be 12 ohms on each of the 3 windings. The Motor Position Sensor (Hall Effect Sensor) has 4 leads: Pin 1 (common) to Pins 3 & 4 (Hall sensors 1 & 2) should be resistance of 10-12 K ohms. Pin 2 is ground

[@Roblo-gz5qp]

i did this much quicker!

[@appliancepartspros]

Roblo22334 Awesome, glad the video helped you get the washer fixed!

[@Roblo-gz5qp]

i didnt use the video

[@Roblo-gz5qp]

Roblo22334 i paused it and went off and did it in 2 secs, i needed to know where to get it.

[@appliancepartspros]

Roblo22334 I am glad you seem to have got your appliance fixed!

[@Roblo-gz5qp]

Roblo22334 by "it" i meant the part