Thanks for sharing.... I do plan on a curved bridge so it was very helpful
@N-Scale5 жыл бұрын
Thanks Will, Mike
@hobbytimewithpapadan84365 жыл бұрын
Great video Mike. And very timely I’m just setting up my first layout (n-scale) and was trying to figure out how to build a bridge using e z track. Thank you sharing. Papadan
@N-Scale5 жыл бұрын
Thanks so much , Mike
@Tom_48843 жыл бұрын
Great information as usual. I am adding a new line to my layout that has to go under an elevated on on a curve, so it's right on time for me! Thanks!
@N-Scale3 жыл бұрын
Glad to help Tom Mike
@normanrowe28315 жыл бұрын
Great scissors! Nice tutorial. Good looking bridge.
@N-Scale5 жыл бұрын
Thanks Morm , glad you enjoyed it. Mike
@ModelMinutes5 жыл бұрын
Very interesting!
@DruSteel695 жыл бұрын
Good to know you can bend that plastic. Thanks Mike. - Drew
@N-Scale5 жыл бұрын
Thanks Drew, I wind up doing it quite often. Thanks , Mike
@DruSteel695 жыл бұрын
You’re welcome, Mike.
@apitheous1947 ай бұрын
Thank you for the video.
@N-Scale7 ай бұрын
You are more than welcome !!
@The282mike5 жыл бұрын
Your hands look like you were messing with awful strong chemicals? Please take good care of them! And nice bridge tutorial. I always enjoy your videos.
@N-Scale5 жыл бұрын
Thanks , it is a skin cancer biopsy to be treated after the biopsy heals.
@paulgermain43745 жыл бұрын
Mike, Very informative video. Might do the same on my layout or the table top layout I am planning. You might give some thought to doing a few for sale as a trial balloon.
@N-Scale5 жыл бұрын
I have no time to make things to sell. Thanks , Mike
@dacuzzz5 жыл бұрын
good job Mike....thx for sharing...vinny
@N-Scale5 жыл бұрын
Thanks Vinny, Mike
@thomasralfenson26843 жыл бұрын
Great to see it. I did it too. The plans from Woodglut helped me a lot :)
@Crookedriverandeasternrr5 жыл бұрын
Nice tutorial. Thanks for sharing I liked and subbed to your channel 😃
@nscalemodeltrainshowtochan44795 жыл бұрын
Thanks so much for the like and sub. Mike
@Crookedriverandeasternrr5 жыл бұрын
N Scale Model Trains How To Channel you’re welcome.
@craiglordable5 жыл бұрын
Looks easy enough.
@N-Scale5 жыл бұрын
It really is and quite effective in a background. Mike
@colnagocowboy5 жыл бұрын
That wound on your hand concerns me do please take care of it
@N-Scale5 жыл бұрын
It is a biopsy and will be treated soon. Thanks , Mike
@colnagocowboy5 жыл бұрын
Actually ive decided to use atlas code 55 but ive 2 kato straight bridges whats the best way to ttansition to/from code 55/80?
@N-Scale5 жыл бұрын
@@colnagocowboy Put the code 80 joiner on and solder it in place on the code 80 rail. Then flatten the other side with needle nose and solder the 55 to the top of that side.
@ATSFVentaSpurNscaler5 жыл бұрын
So that's how you did it! Very good how-to video for making a curved bridge! Now if you'd only show on video how you curved the plastic of your Rix 1930s-1960s concrete highway bridge guard rails that was on your ACT 2 layout! That would be an awesome how-to video. Thanks for sharing these tips, Mike! By the way, thanks for joining in the chat in my ON TRACK TUESDAY livestream earlier this week. The chat text scrolled by so fast that I didn't even realize you were there until I saw your words during the replay. I'm glad you stopped by. -from Tom Pilling
@N-Scale5 жыл бұрын
Thanks so much Tom. I bent the whole Rix bridge using this same method. Thanks , Mike
@markhayes64075 жыл бұрын
Nice post. I have a spot right now on my layout where it can be used.
@N-Scale5 жыл бұрын
Thanks Mark , Mike
@JoeG-firehousewhiskey5 жыл бұрын
wow, great job, you made that look easy
@N-Scale5 жыл бұрын
Thanks Joe , it is easy. Mike
@jerrysmith19295 жыл бұрын
Interesting demo
@N-Scale5 жыл бұрын
Thanks for checking it out. Mike
@kevinbirdone15 жыл бұрын
Thanks for the insight, I'm a new beginner so it was of great help
@N-Scale5 жыл бұрын
Thanks Kevin, Mike
@michaelcipres42283 жыл бұрын
Mike l really appreciate the detailed explanation and work that you do. This is the first time I've seen this and it will help me greatly because l was searching for information like this. Thank you for your sharing your experiences and may the Lord bless you. A friend.
@N-Scale3 жыл бұрын
Thanks Mike , Mike
@mgamga94762 жыл бұрын
Great Video. Feel like I'm in model railroading school. I plan on doing a 4x8 n scale layout so I have been educating myself before I start. Thankyou.
@N-Scale2 жыл бұрын
Thanks , Check out ur How To Page. www.fiferhobby.com/how-to/
@medtech683 жыл бұрын
thanks for that video Mike. been trying to decide how to make that curved bridge and bam there was your video. Much appreciated for this rookie
@N-Scale3 жыл бұрын
Glad to help David. Mike
@gerdeguelle19675 жыл бұрын
Looking great and à Nice tip
@N-Scale5 жыл бұрын
Thanks Ger. Mike
@jolliemark62945 жыл бұрын
Thanks Mike for the great tips as always you make it easy....😀