How to seal concrete walls with RadonSeal's Concrete Sealer

#concretesealer #foundationwallsealer #floorsealer
RadonSeal concrete sealer will waterproof, strengthen, penetrate, and permanently seal indoor or outdoor poured concrete walls, concrete floors, and concrete blocks against water seepage, moisture vapor, efflorescence, and even radon gas!
RadonSeal concrete sealer stops hydrostatic pressure, densifies the concrete, and prevents spalling, cracking, and dusting.
Use for sealing basement walls, basement floors, slabs-on-grade, foundations, crawlspaces, garage floors, driveways, warehouse floors, and parking areas. Slip-resistant. Paintable. Water-based. Zero VOCs. Money-Back Lifetime Guarantee!
Learn more about it here:
www.everything...
Purchase it here:
www.everything...

[@TetragrammatonPriest]

How long does this last? Can I expect this to prevent moisture from coming through the walls for the life of the home?

[@thelasttobechosenone1203]

Can this be applied to concrete floors as well?

[@plouffe.]

Yes.

[@jorgelopez8069]

Any reason why it dried like milky white?

[@ivanohemartin]

Hi can this be used to protect a baseboardess interior concrete wall?

[@MikeDayConcrete]

This sealer is to help block moisture vapor from coming through your basement walls. I'm not sure if I answered your question but I hope so.

[@kenterry9396]

Is it ok to apply to atwo coat concrete over brick walls using radon seal and then radon waterproofer?

[@cmb1120]

Mike. My form ties/tie rods in my foundation are rusting and causing cracks In the exterior on my garage side. What’s the best way to tackle this? Rubberized material, polyurethane, or epoxy?

[@curtistruong3042]

Have you tried spraying from the inside of a basement? If it is penetrating... would that be an okay solution to prevent moisture if digging 8 feet around the foundation isnt cost effective?

[@MikeDayConcrete]

Curtis Truong Yes, spray from the inside. It will help prevent moisture vapor.

[@reservoirman]

how many coats of spray are needed?

[@MikeDayConcrete]

2 coats, don't wait for it to dry. Do a small area then go right back over it.

[@reservoirman]

@@MikeDayConcrete fantastic, thank you

[@ravendomingo1249]

This will work in concrete slab roof?

[@effinchad]

Will this work on older clay brick basement wall, circa 1920, after I have removed the efflorescence that is present? If not, can any other?

[@ericyoung6824]

If I grind the existing drylok paint off the wall can I spray it then with Radon? And would it be double effective if I then drylok on top of the sealant?

[@MikeDayConcrete]

Yes to both of your questions

[@judevucovich7068]

Use the RaydonSealer instead of drylok…. Or you will be grinding the drylok off again b/c it will start peeling all over again…

[@thelasttobechosenone1203]

@@judevucovich7068 Why would the drylok peel?

[@judevucovich7068]

@@thelasttobechosenone1203 I have no idea but we had to clean it off so we could reseal the walls. It chipped off and wasn’t working. The radon seal is working pretty good after we cleaned off the drylok off.

[@thelasttobechosenone1203]

@@judevucovich7068 Thx

[@thelasttobechosenone1203]

Do I have to acid wash the efflorescence before applying the sealant?

[@plouffe.]

Yes.

[@ChattyKat]

It's just as easy as mix & spray?

[@MikeDayConcrete]

500 Miles to Go Yes, just spray it on.

[@angryamerican]

Does this stuff stink at all?

[@MikeDayConcrete]

No Drew, there's no odor

[@pjzak3939]

what song is that playing?