How to service a stihl mtronic saw

[@Dale-p1e]

I see why the pros have you take care of their saws. It’s your work ethic and attention to detail. Good job Donnie thanks for your videos

[@donnywalker4691]

Thanks

[@brianthibodeau]

Thanks for making that video, and all your videos. It really helps me.

[@donnywalker4691]

your welome

[@leonardryan8723]

Donny it’s WET NOSE Wednesday in the 709 ! 😊

[@605Firewood]

I have a ms441c thats ported on the exhaust only and has a opened up muffler and big bore kit. Cut 3 cords flawlessly. Cut a rotten tree that had lots of fine dust come from it. Shut the saw down and now it wont run past 1/2 throttle. Did mtronic reset and it still wont go. My 2 stihl dealers tell me its running this way due to the mods. But it ran very well then poof its over... piston isnt scored. Cleaned the carb, new air and fuel filter, also a new spark plug. Pretty annoyed. Your videos are really informative. Your knowledge is very much appreciated.

[@Brian2bears]

Good stuff Mr. Donnie...

[@230e4]

The Stihl MS261 is a great saw. Have a great day!

[@zeke1eod]

Thanks for all you do! I can't wait until you do my 372 clone. Awesome information. Stay safe, and God bless

[@daryn_Canada_1066]

Great video, always something new to learn. Good luck with your new cart at the race!

[@ChrisLascari]

Good afternoon, Donnie

[@ronsilva516]

That was good info on them. M tonics carb set up👍😎😎

[@wednesdar452]

Thank you Donny! That was super helpful!! Going to check what color mine is now!

[@bryansteele8210]

Thanks Donny. On my 3rd 261 ( walkerized) Wished I’d had my 2 previous ones built by you😉 Still running great, zero issues. Thanks for the tips!

[@donnywalker4691]

keep then in the woood

[@leonardryan8723]

Donny new ball of worm 🪱 for me buddy . 😊 iiiii iiiii grew up 🆙 in the old school on chainsaw 😮.

[@tonywelch7786]

Yes. I know the semicircular impression left on the piston from the butterfly that cracked the piston skirt and ruined the the cylinder on my big 048.

[@longbar105d]

Always learning, thanks buddy!

[@michaelnewman-ds3fr]

Thanks for the video Donny!

[@turnbank3492]

Thanks! Good luck at the track 💪 🏁

[@tonywelch7786]

Damn couldn't quite see you using the gauge with the camera angle. Wanted to see that. Great insight.

[@donnywalker4691]

sorry will redo some day

[@tonywelch7786]

@@donnywalker4691 👍. I'm running in my new 500i. Any advice for how long etc. I'm not revving it full or for too long...

[@thebradleysoncatbirdhill6849]

Thank you, Professor Donny!!!

[@Dunlap-uj5zl]

👍

[@pm270100]

got one on the bench 261C and its roo ted piston cyl crank bearings seals

[@jreif14]

Good video, Donny. My friend has a 441 that I rebuilt the carb and replaced the solenoid on it, because it will not idle and it did not fix the issue. It’s a bear to start but when it will start, it’ll run fine on under throttle, but once you let of it’ll die right away. Any idea what I could check for next? Thanks.

[@donnywalker4691]

call me 1 250 327 1934

[@victoriousvictor7978]

Exellent! You ever intrested in plugging in a blown up 500 and seeing how many hours a guys getting out of them? Iv had 2 of my older ones give up the ghost and im wondering if the hour meter on them is about the same.

[@waynetharp]

Every Chevy/GMC truck I have ever owned dropped the transmission between 140-160,000 miles. I have always said the computer is set to do this. The warranty is up and it is away to get owners considering buying new. It would be interesting to see if these saws are factory set to fail as well. If they start failing at the same amount of hours with different operators and conditions...Stihl conspiracy!😅😂

[@donnywalker4691]

You could take it to the shop see if they can do that bud

[@momcilorotarevic]

Hello donny how are you? I have one question, so if you can answer me. So like this, I have a brushcutter stihl fs461c with 3.0 m tronic version, black solenoid and orange fuel filter. My question is can I replace my black solenoid with a white one without any consequences? Thank you very much. Cheers🍻

[@jakethomasgarner1886]

Hey Donny you’ve worked on a lot of the later model Mini Macs. Did you ever do much port work on those little saws?

[@donnywalker4691]

Never thought of porting them

[@krisglenn1830]

Hey Donny I hope things are going good. I have a 365 xtorq and I’ve heard you can wake them up but doing a couple small mods. What’s your thoughts on the 365 and have you ever done those mods?

[@donnywalker4691]

Yes many of them you can make 365 xtorq into 372 power easy I have a video on that

[@krisglenn1830]

Thanks Donny!! I’ll check that out

[@julianlaustsen1991]

can u tell me if 500i's can handle sitting for many years?

[@donnywalker4691]

Like any other saw it could be a problem stuff rots eh

[@michaelthompson859]

Donny. How much to walkerize a ms362c

[@donnywalker4691]

were ya from and how old is saw