How To Service Clutch Grizzly 700

[@johnwcatterson]

If you don't have an impact driver, just use a small hammer and smack the head of each screw, which will loosen the treads and they'll usually back out very easily

[@imagoodmann]

I see you started it up after the maintenance. Yet you didn't seem to engage the clutch? Did I miss something? Shouldn't you jack it up and be certain everything is engaging prior to sealing up the cover? Thanks for the advice in advance and also for providing such a great video!

[@chrispotts2808]

Anybody know why kingquads don't use any grease on the rollers. I changed my belt at 900 miles and cleaned all of the rollers. They were pretty much dry except for some belt dust. I cleaned them and put them back in dry, they moved nice and free. I did add some wheel bearing grease to the sheave and inside primary seals and bushings.

[@devlzblood]

What kind of vice grips are those?

[@kadeowens4838]

hey thanks for the video, I have an 08 grizzly 700 with about 3600 miles on it. have you ever been into the "wet" or "inner" clutch behind the inner primary sleeve?

[@cubbeezx]

Good timing, I have to do our two any day now. Did you say you changed the belt as well? Just wondering if you use the OEM belt or something else.

[@sh0rtsleeve]

yeh cube i always use oem belts!

[@sloppysecondsracing]

What is the torq for the primary and secondary? Also where do the long bolts go and the short bolts?

[@alextm33]

how do you torque the secondary nut that holds the spring in.I heard to just hand tighten it.any suggestions

[@kylefitzgerald4419]

What type of tool was that you were using when taking the screw`s out just wondering because I might have to service the clutch on my Kodiak 450 soon?

[@Theyrun]

+Kyle Fitzgerald They are called impact drivers. most all auto parts stores has them.

[@kylefitzgerald4419]

Theyrun Thanks, I'll have a look at my local shop!

[@themoneyclub6008]

How often do you have to change your belts?

[@sh0rtsleeve]

i change mine every 5000 kmhs. dont really have to cause they will last longer lol

[@themoneyclub6008]

I had a sportsman and king quad but had to change belts every year. Around every 1000 km's. I rode them hard though, but thats how I like to ride.

[@paulholla5551]

Nice job! How was St. Charles this year?

[@sh0rtsleeve]

a disaster lmao video coming soon

[@paulholla5551]

sh0rtsleeve looking forward to it!

[@shanegiggie]

P Holla me too ill be looking forward to it!

[@davidsmith5982]

If you are into this type of video do yourself a favor and get a couple of JIS drivers. I wish some one would have told me 40 years ago. If you see a little dimple on the head of a fastener, like the ones on my Yamaha primary sheave that I took apart yesterday without an impact driver, they are JIS (Japanese Industrial Standard) drivers. They are easy to mess up with a philips driver, trust me I know.

[@aaronanhalt5088]

How da fuk does all that grease let the rollers move when it's -20°?????

[@lancebarton6960]

good video

[@jasondortch8845]

Whats the ft lb of torgue

[@kadeowens4838]

I've seen in other videos that it's 100 ft pounds for the grizz 700

[@njm1251]

this is really weird when all youv worked no are can am clutches

[@ProfitOfDoom420]

Booya!