How To Service Seiko VD53 Quartz Chronograph Watch Movement | Watch Repair Channel

[@stephken8077]

Thank you so much for this video. I have just managed to disassemble and reassemble my first ever watch movement following your instruction : - )

[@SolimBD]

Wow great, thank you so much

[@josemanuelcastillo7460]

Excelente trabajo éxitos hermano.

[@schachere621]

So,at first I was intrigued by this,but other than take it apart and put it back together,what did you do? How was it serviced?

[@tv175s3]

No luck with my rebuild. There was some battery corrosion, all cleaned, but no ticking, no chrono. I guess the circuit or quartz is gone. The outer coil has 1.3KOhm and the inner 30MOhm.

[@walterwinnipeg7350]

Wow, that was amazing! How did you organize the parts that you removed, to keep them in order? I often use egg cartons to separate screws and fasteners when I am repairing something, although I have not yet attempted a watch movement. But, inspired by this video, I think I will try one --- a cheap one first. :-)

[@SolimBD]

Thanks for comments

[@ReminCruz-r7b]

hi! can you tell me what dial size fits a vd54 movement? thanks!

[@SolimBD]

No idea

[@HebertBarra]

Muito bom! Agora só falta a OS20 e a Ronda 5040!

[@SolimBD]

Ok brother, OS20 & Ronda 5040 video coming soon

[@SolimBD]

Ok brother, OS20 & Ronda 5040 video coming soon

[@oldtickethall]

Thanks great video mange to bend my train wheel setting lever and this video help me do dis and assemble. Thank you.

[@SolimBD]

You're welcome!

[@SY-yz5dl]

Thanks for uploading. What is your opinion about this movement? Good one? I noticed that the movement is used in many watches from different brands. Thanks

[@SolimBD]

You are most welcome. It's a good but this is plastic movement.

[@jesussanchezdominguez2594]

Lo malo es que tiene muchas piezas de plástico

[@elvissehic8618]

i ve got nautica watch, with VD51 movement. It is late maybe 10-15 min per day. Can it be fixed?

[@gamavision8748]

No sabía q este movimiento era de Seiko! Muy buena info...pensé q era de Epson

[@SolimBD]

Epson seiko concern

[@MicheleCaprari]

What clocks mount this?

[@SolimBD]

Movement holder

[@MOHAMAD-tg6pc]

If i search VD53C it always comes up with a word brand 'Hattori' Is it the manufacturer or Seiko itself??

[@SolimBD]

Yes

[@elgersoshafi5044]

my friend I want to ask for a problem I have a watch like this fixed and it fell out of my hand and the little hands of the second, hour, minute were cut off namely small needles how can i fix them as in my country there is no clock regulator

[@philtowle4683]

They should just push back on. You can get special tools that are simply 'sticks' with a hole in the end or a press that does the same thing. I find it easier if you hold the hand with a piece of masking tape to align it then press back on.

[@eliseoebarahona9486]

Is VD53B and A same as this?

[@SolimBD]

Same

[@jamrug3472]

Do you consider this movement as reliable and long-lasting? I can see a lot of plastic here...

[@SolimBD]

It's plastic movement

[@jamrug3472]

@@SolimBD so it means that it's a bad movement?

[@SolimBD]

Not bad. This is a good movement also.

[@jamrug3472]

@@SolimBD Thank you for the answer 🙂

[@trevbarlow9719]

I believe it's designed to be replaced, not repaired.

[@hefinwilliams3925]

if i send mine in completely dissasembeled would you put it back together 🤣 all the cogs and screws keep sticking to the tweezers gave up 🤣

[@SolimBD]

Yes

[@hefinwilliams3925]

​@@SolimBD are you in the UK?

[@SolimBD]

Dhaka Bangladesh

[@ghousemohammed1345]

Vd53 movement minute wheel com0laint

[@rbmwiv]

That’s just a disassemble and reassemble no cleaning or oiling of anything. Also I have never seen a need to service $10 movements that are readily available. When the movement is below a certain price it’s much more cost effective to replace it than service it. If it’s no longer available then you have no choice but with something that can be bought many places for around $10 USD. Great video though very nice work just wish you had actually serviced it.

[@SolimBD]

Thank you so much

[@morthotechartworks6129]

Wheres the crystal?

[@eugeniothompson1]

No cleaning? No oiling? Sorry, but that was a NO NO 'service'. Sorry pal.

[@charlescosta9483]

🤔👏👏👏👏👏👏👏👏👏

[@Roman___S]

🙏👍👍👍