HOW TO SET UP A PRESSURE WASHING TRAILER W/ WATER TANK

[@ridethepace6005]

I just went with the electric jack. I only hook up and unhook 1 time a day, and still I'm loving it. I just upgraded to a 8 gpm Honda machine from a 4. , and that's been a game changer too. Upgraded from a 150 gal ibc to a 275, and added a 12 gl marine gas tank. Next goals are a downstream remote and electric reels. Can't wait.

[@emandujano6777]

I like how you chained up your machines. I’m about to do that right now.

[@billydavidsonvip]

It serves a couple purposes average one is deterrence to south another purpose is in case of an accident God for bid the machines should stay on the trailer

[@reysexteriorhomeservicesll1709]

Nice video! It's always good to see other's trailer setups.

[@billydavidsonvip]

Just when you think things are set up perfect you come up with a new idea LOL I try to keep things very simple and easy to work on but our business is getting very hectic and we will have to add on new equipment to our trailer. Trying to figure out where all the stuff needs to go but still keep the same size trailer is challenging

[@reysexteriorhomeservicesll1709]

@@billydavidsonvip I can see that being an issue.

[@michaelkleckner3007]

Relocate your dump valve up onto the horizontal pipe then add a short pipe out of the 90 elbow to help clear your buckets. Also using 92 or 93 octane gas helps the motors run cooler and stronger and that goes for any small gasoline motor. Good videos

[@billydavidsonvip]

Awesome tips thank you

[@richardh5483]

billy looks like the y pipe is backwards going to the pressure washer on the right just saying that could be why water restriction

[@derrickbell3087]

Hey Billy great video once again! Check the boost valve in your pump. The spring may be broken, I had the same problems with losing pressure from a new machine. (Somethings you may want to try) Add you some 4x4’s maybe to get your tank higher than the pumps and try to get a straight Tee if you can to help with water restriction. On your dump valve or blow down add a detachable hose for “shower” use or to wash chemicals off. Great setup. I’m in the process of doing myself a build and these videos help to get a good idea of how to make sense of your setup so it can work efficiently for yourself. Thanks again

[@mikecoughlin4128]

Even if you increase the header size the bottleneck is still the 2” bulkhead tank outlet.

[@Bodilesss]

Purple n Gold Billy!

[@MrJuandiego1988]

Any tips of where to position a water tank on a utility trailer?

[@thomaslopez2427]

So this system is all gravity fed?

[@TexasWatchman]

How about paint trailer using bed liner coating like Line-X ?

[@Eagleshot26]

Does your trailer have breaks?

[@drowization]

Great vid, where did you get your business sign from please ??? Thank you,,,,

[@billydavidsonvip]

Sighn world Hammond, Louisiana

[@drowization]

@@billydavidsonvip Great, thank you so much,,,,

[@themessupsofficial]

So Just to make sure , you’re running two belt driven washers. I wanted to ask if this would work on a direct drive washer

[@JosueDavila-vn1lh]

No transfer pumps? I’m new to this? Is that cause your using the 8 GPM??

[@truthseeker1532]

Thanks for the video. How you like your Tundra? That’s my dream truck right there

[@tmdspressurewashingparking2333]

Always great content!!

[@geauxbro7]

So if you do get new machines, you'll sell your older ones?

[@jeremyb5245]

Thanks for the info. I have same tank, how did you mount it to trailer? I’m have issue finding away to secure it.

[@Windowstew]

Great information!!👍👍

[@billydavidsonvip]

Thank you

[@rickwashek478]

Do you use fuel stabilizer in your gas

[@lusean193]

Good video well presented

[@vernonbussell4945]

Thanks Billy. I’m about to mount a buffer tank and this video really help me. Be safe and keep making the big bucks

[@samlaramee4107]

what's the dimension of this trailer?

[@billydavidsonvip]

7 by 12

[@keithdittmar1701]

Don't forget about maintenance on the trailer. Those wheel bearings need to be greased. The brakes probably need adjusted. Check for wear on the suspension parts. I would suggest a maintenance log for both the truck and trailer. If there is ever an accident, it would really help if you can prove that the accident was not caused by lack of maintenance.

[@trans-a.m.]

I like how SIMPLE your set up is. It's good to see it doesn't have to be complicated to make $$$$$$👌🏾

[@nextdoorpowerwashing8340]

Great content!

[@jasonchampion9932]

Isn't there a 60-40 rule 4 weight trailers

[@Thetruthhurtstrump2024]

Is that tank big enough for a 10 GPM unit? Also do I need a double axle trailer or with a single axle do?

[@billydavidsonvip]

Yes it should be sufficient enough but I would definitely recommend a double axle trailer if you're going to travel with any amount of water in the tank

[@Thetruthhurtstrump2024]

@@billydavidsonvip I’m just curious how come you recommend a double axle?

[@Thetruthhurtstrump2024]

@@billydavidsonvip I found a company that makes single axle trailers that hold 4000 pounds, It is also aluminum as well

[@keithkalson4722]

i think it would look good painted yellow to match the tank banner

[@johnnyperkins79]

Does the heat from the exhaust melt the tailgate?

[@billydavidsonvip]

No but it was a concern but it seem to work out just fine

[@michaelc7283]

Hi Mr. Bill Davidson, Question - if I run a 5.5 gpm belt drive pressure washer and my buffer tank has a 3/4 water feed bulkhead would that be good enough for water? Or should I replace it with a 1 inch and use 1inch pipe? My brass water connector on my pressure washer is 1/2" mpt - 3/4". Should I also replace that to a 1/2" mpt - 1"? Any information will be grateful. Michael C - (WA)

[@billydavidsonvip]

I have seen different set ups that will use a three-quarter inch feedline but in my opinion a 1 inch is better if it's not too much trouble to change it out

[@michaelc7283]

@@billydavidsonvip I guess not. I just have to buy a few fitting. I just thought 3/4" will be enough to feed one pressure wash. Thank you

[@fenceman53]

Yellow or black deck to tie in with sign. Can’t see the back of trailer to see its setup

[@havefaithpressurewashingse7272]

I have a tank as well but mines is Not a 2in it’s bigger than a 2in. I tried a 2in on the tank it was to small

[@benwhite3017]

The ding a ling pokes out dammit was what he meant 😳🤣

[@Igor-q3f]

do you use a 3/8 or 1/2 hose after the siamese kit for 16 gpm? i have 100 g tank, one belt drive 5.5 and direct drive 4 gpm. Planing to use the siamese kit, Is one line 1'' bulkhead enough to feed these machines or i need to install a 2'' line? I thought to install a second 1'' bulkhead. Thank you.

[@billydavidsonvip]

At least 50 feet of half inch hose after the Siamese kid would be best Both machines should do great off of a 2 inch single bulkhead

[@Igor-q3f]

@@billydavidsonvip thank you

[@rich6454]

Can you use a 19 in whisper wash with 4gpm?

[@billydavidsonvip]

Absolutely, just make sure you have the proper spray tips

[@christopherwest3319]

I have watched your videos and loved them and they have been very helpful and enlightening. I have just watched this video, and you are doing a rebuild of your trailer and requested some ideas about the color of your decking on the trailer. I would suggest yellow. Your sign on the side of your buffer tank is black and yellow so maybe try that on your next build, for color matching.

[@jasonchampion9932]

I've got an idea for a video But what it would involve is your biggest competition Apex😁🤟 The video would go like this call it a teardown -Step Up video. Where when your trailer is being torn down Apex Step Up with his rig For that day or so.. That is if he is ready to step up to the wand so to speak!😂 I enjoy y'all's videos they are very helpful and usually Within reality. 👍👍🤟🤟✌✌

[@billydavidsonvip]

He is starting to leave the nest on short flights but returns worn out and hungry LOL

[@billydavidsonvip]

Pressure wash training courses Mwww.billydavidsonvip.com/PowerWash

[@billydavidsonvip]

www.billydavidsonvip.com/PowerWash

[@drj3033]

abs might hold better

[@spear-it]

Great video! I just reviewed my pressure washing set up. Check it out!

[@billydavidsonvip]

www.billydavidsonvip.com/PowerWash

[@billydavidsonvip]

I want to train a very select handful of people in something very special. If you are interested in investing in your future and have free time to do more power washing jobs please text me at 985-345-0778

[@jonathanhall571]

Sell me one if you buy some new one's 🤣 Nah fr