How to set up your LVLP spray gun to paint cars

In today’s video I show you how to set up your Lvlp spray guns to paint cars and how you can set up the spray gun to best fit you so that you can apply your materials how you want. In this video I go over the spray gun and the three controls and how you want to set them for the best results.
R500 lvlp spray gun: amzn.to/3MMNLnN

[@gtwrmw1978]

Underground Paint King, thank you for these excellent videos. After struggling to get results with my hvlp and hte guns with my small compressor, sanding heavy orange peel, trying again, sanding, trying again, I finally took your advice and got a Sprayit LVLP. I set the gun up exactly as you described in this video. Finally, smooth paint! You've done the DIY community a huge service with your channel. THANK YOU.

[@UndergroundPaintKing]

You’re welcome R. I’m glad I can help in any way possible and glad to hear it worked out well for you!…appreciate you checking out the videos 💯

[@alexbatres3880]

I worked in a body shop about 8 years ago. Decided to pick auto-body up as a hobby again but didn’t want to invest over $1,000 in a compressor, and expensive spray guns. Everything I’ve thought of doing you’ve had videos for. Greatly appreciate your videos and your energy!

[@UndergroundPaintKing]

You’re welcome Alex and I hope the channel continues to be helpful and I appreciate you checking out the channel!

[@malcolmchadwick4047]

I tried your tips today, and it got me in the ball park for a fine tune. Other videos tell us we need the rugby ball shape, but don't tell us how to achieve it. I have subscribed as what I like also is that you take the time to reply to each and every one of us and mention us by our name. Never see bad chad do that 👍

[@UndergroundPaintKing]

@@malcolmchadwick4047 I’m glad the tips helped and I appreciate you subscribing to the channel and I hope it continues to be helpful to you 🙏🏽💯

[@JerryDavis-g9h]

Idc what no one says, you helped me! You showed me exactly how to set up my spray gun! You also showed me how to set up my compressor which is exactly like the one in your video!

[@UndergroundPaintKing]

Glad I could help you out Jerry and I appreciate you checking out the videos!

[@SprayWayCustoms]

That’s a fact. The spray pattern matters 👍🏾keep that knowledge coming King 👑

[@UndergroundPaintKing]

Thanks Sprayway I appreciate you 💯

[@davej.7934]

Thank you ! One of the most informative , easy to understand and most importantly no nonsense content creators I have seen. Just about every question I have had you answered in the moment.

[@UndergroundPaintKing]

You’re welcome and I’m glad the video was helpful 🙏🏽💯

[@paintittripura]

Love from India, I m also a painter and I learnt from KZbin..There is no Indian youtuber for this type of content. Thanks to you and others youtuber like you for these type of content..I have same gun R500 from aeropro..if you have A608 please make a content on that. Thanks..

[@UndergroundPaintKing]

Thanks Paint It, I appreciate you checking out the video and I’m glad the channel is helpful! I don’t have the A608 but I’ll try to get my hands on one and make some content on it

[@wacoldestv1704]

I never opened my fan full throttle. It's was taboo in the shop I worked at years ago but when you did it. It looked like it would be very helpful next time I paint anything. Much respect upk

[@UndergroundPaintKing]

Don’t be afraid to open that gun up MrWacoldestv you might like that setting, at the very least do so test panels and see if it works for you…I appreciate you checking out the video!

[@jonnyturbo6142]

thanks for this one..Rewatching this right before I hop in the booth for the first time…the people’s champ 🙌🏾

[@UndergroundPaintKing]

Good luck and I’m glad the video helps Jonny💯

[@jimviau327]

Oh Man! I wish I saw this video before I started my job. It would have prevented me from scraping $100 of paint. Thanks

[@UndergroundPaintKing]

Wow! Hate you had to do that, hopefully the video helped for the next time you spray

[@bluesbubba7429]

Thanks King! That helped me get the new R500 set up for the first time. I'm spraying a guitar and this helped a lot!

[@UndergroundPaintKing]

Glad the video was helpful BluesBubba💯❗️

[@halfinchholes88]

Another informative video. I've learned more about painting than the summers I spent working in my father's body shop. Everything was already setup, and you didn't adjust/change anything. Did a LOT of sanding, masking, and surface prepping those months. I've got 3 stickers and a T riding on this raffle.

[@UndergroundPaintKing]

Thanks I appreciate you checking out the video and I appreciate you supporting the channel…good luck Half-inch-holes!

[@ginfizz20]

Thank you. Very important step I see many painters just spay out into the air to set the gun up.( a little BS---You say your fan is 6-7 inches. Then you hold you hand up to show how far that is; I'm betting that the distance from the tip of your thumb to the tip of your little pinky is closer to 9 inches.🤙) Keep up the good work.

[@UndergroundPaintKing]

Thanks Tom I appreciate you checking out the video 🙏🏽

[@superbear617]

I'm not sure how I found your channel; maybe Slade's VW. But, you do a very good job explaining this - very helpful.

[@UndergroundPaintKing]

Glad you found the channel and I hope it helps Super Bear…I appreciate you checking it out!

[@AlexB-op7kb]

This is one of the most helpful and straightforward tutorials on using an LVLP spray gun on KZbin. Thank you. Only question I have left is what PSI to set on the inline regulator.

[@UndergroundPaintKing]

@@AlexB-op7kb I’m glad the video was helpful and as far as psi goes, that’s really determined by the material that you’re spraying so it’s best to test spray with the material that you plan on using. I myself spray between 26-30 psi with the different materials I use

[@rmd1629]

​@@UndergroundPaintKingWhen you mentioned 26-30 psi, it that the set pressure or the pressure when spraying as the pressure usually drops when spraying I think. Very good explanation of how to set up the gun, you explain very well in easy to understand speaking method. Thanks.

[@UndergroundPaintKing]

@@rmd1629 I appreciate you and the 26-30 psi is at the spray gun. So depending on what I’m spraying I would set my air regulator at 26-30 psi for the spray gun itself. I hope that helps but if not let me know

[@bryanderian8276]

Thx man.first time painting my cutlass

[@UndergroundPaintKing]

@@bryanderian8276 you’re welcome and I’m glad I could help 💯💪🏾

[@bryanderian8276]

My friend watched alot of videos.ya do a great job..instructing from entry level...I will go to web site and grab somthing.only wished u did House calls.lol.b safe

[@TheIrvingsylva]

Bruh you and Trigger changing the game for us who are DIYers ….👊💪

[@UndergroundPaintKing]

@@TheIrvingsylva glad I could help 💯💪🏾

[@TerrickHarden]

I'm finishing up the last few coats on my first paint job today(02 RCSB Silverado) and I would have been lost if it wasnt for ppl like you & SprayWay.. Thank you brother.. I appreciate you King.. 🫡

[@TerrickHarden]

Videos coming soon too btw lol

[@UndergroundPaintKing]

@@TerrickHarden that’s what’s up Fam, I’m glad I could help!

[@Glofilter]

Awesome video. You made it look simple, and did an excellent job explaining how to get it set up. Much appreciated.

[@UndergroundPaintKing]

Thanks Glofilter, I appreciate you checking out the video and I’m glad it was helpful!

[@workmate222]

A very helpful video thanks King, appreciate your advice

[@UndergroundPaintKing]

@@workmate222 you’re welcome and I’m glad the video was helpful 💯

[@blakejohnson2206]

Thanks mate. Nice and easy to understand.

[@UndergroundPaintKing]

You’re welcome and I’m glad the video was helpful to you 💯❗️

[@richarcruz7843]

Thank u UPK God Bless for all ur knowledge every video is a wealth of knowledge for generations to come 💪🏽💪🏽💪🏽

[@UndergroundPaintKing]

Thanks I appreciate that Richar and appreciate you checking out the videos!

[@66burnout]

I watched a few of your videos before buying my lvlp gun and air compressor. I feel confident now to paint my old 79 dodge truck. Gonna try painting the tailgate today as a test to see how it goes then the whole truck here soon. Thanks!

[@UndergroundPaintKing]

Awesome to hear 66Burnout💯 I hope the channel continues to be helpful to you 💪🏾

[@66burnout]

@@UndergroundPaintKing Hey man it’s 66burnout again I did my first painting with the lvlp 2 coats and looked wet! Next day seemed somewhat matte and textured. Any idea what I did wrong?

[@UndergroundPaintKing]

@@66burnout it could be the materials that you used and how they cure over time in the temperature you painted in

[@66burnout]

@@UndergroundPaintKing Eastwood single stage urethane sprayed at 21 psi and sprayed @ 70 degrees

[@UndergroundPaintKing]

@@66burnout might have to make some adjustments to get it to flow out, what hardener did you use

[@clipps11]

Definitely subbing as I wanted to learn to paint my own car for years thank you 🙏🏽 you’ve earned a follow out of me for sure !

[@UndergroundPaintKing]

I appreciate you subscribing to the channel Clipps and I hope it’s helpful to you 🙏🏽💯

[@georgeherefordhereford3428]

Great job showing!

[@UndergroundPaintKing]

@@georgeherefordhereford3428 thanks George! I appreciate you checking out the video 🙏🏽💯

[@starrpuruto588]

awesome channel bro thankyou so much for sharing your knowledge and skills thanks for keeping it real.

[@UndergroundPaintKing]

You’re welcome Starr Puruto, I appreciate you checking out the channel and I hope it’s helpful to you 💯💪🏾

[@joeybarry1827]

Love the video short and sweet been spraying gell coat for years getting into automotive paint and body work so this definitely helps thank you Brother!!!😊

[@UndergroundPaintKing]

You’re welcome, glad the video was helpful and I appreciate you checking it out 💯

[@mellis181]

Just picked up this gun. Thanks for the lesson!!! Might be back to ask some more questions. 🙂

[@UndergroundPaintKing]

I’ll do my best to help out 👍🏾

[@shaydglenn]

Man, thanks so much for this! I really appreciate it!

[@UndergroundPaintKing]

@@shaydglenn you’re welcome and I’m glad the video was helpful 💯

[@joewalton2726]

I'm glad I found your channel. I'm getting the information I need to start my project with confidence. . Thanks

[@UndergroundPaintKing]

I’m glad the videos are helping Joe and I appreciate you checking them out!

[@myoneblackfriend3151]

The video I needed to see. Thank you.

[@UndergroundPaintKing]

You’re welcome and I’m glad the video was helpful ❗️

[@jaimereyes7480]

Great content. Picked up a summit lvlp gonna test it out one of these days on a replacement door for my dad's work truck.

[@UndergroundPaintKing]

Nice Jaime💯 let me know how it works out for you and I appreciate you checking out the video!

[@willhart7861]

Appreciate you putting the time into making these great videos to help people like me! Much respect and appreciation to you brother! Thank you!

[@UndergroundPaintKing]

You’re welcome and I’m glad the videos are helpful!

[@FATALMONSTROCITY]

Damn bro your vids are straight to the point and very informative. I do body work and want to get into painting my own stuff. Damn this is making me want to prime my car right now lol thanks

[@UndergroundPaintKing]

Lol glad the channel is helpful to you and go ahead and pick up that spray gun and slang some paint, I know you can do it 💯💪🏾

[@sugarcanfly]

Thank you I learned something I didn't know about lvlp guns

[@UndergroundPaintKing]

You’re welcome and I hope the video was helpful!

[@1Warzone1]

Good looking 👑. I'm about to spray my tsx again. The first time we sprayed a gallon of primer and a gallon AE paint but got alot of orange peel so hopefully on this next gallon second time is a charm

[@UndergroundPaintKing]

Good luck on this next spray Fam!

[@kirbyconner9952]

Great explanation simple and to the point.

[@UndergroundPaintKing]

Glad the video was helpful!

[@micko1404]

Awesome simple explanation mate, thank you, cheers from Australia

[@UndergroundPaintKing]

You’re welcome and I greatly appreciate you watching from Australia!

[@brettwardle4723]

Thanks mate, really helpful. Using my gun for the first time on my minis hatch lid. Pray for me.😄

[@UndergroundPaintKing]

You’re welcome Brett and I appreciate you checking out the video…you got this bro 💯💪🏾

[@jayinmi3706]

I just ordered my SprayIt gun kit about half an hour ago, along with a diaphragm regulator and inline water filter. Looking at a compressor side filter from Steel Camel, too. Not sure how I missed this video before...but thanks for the info!

[@UndergroundPaintKing]

Sounds like you’re all set Jay 👍🏾

[@smarternu]

Good audio, nice information. It's all about flow.

[@UndergroundPaintKing]

I definitely took what you said into consideration and appreciate you!

[@The_TrueBat]

Very simple and helpful tutorial, thank you

[@UndergroundPaintKing]

Glad the video was helpful Leon, and I appreciate you checking it out!

[@leejones733]

Great video. Very helpful for a newbie DIYer. Thanks for posting!

[@UndergroundPaintKing]

You’re welcome Lee, I appreciate you checking out the video 💯

[@lidieri]

Greatest explanation ever ! Thank you sir. 👍🏻

[@UndergroundPaintKing]

I’m glad the video was helpful 🙏🏽💯

[@legalsan3913]

This was a great video about how to set up a LVHP gun. Do you recommend a LVHP, HVLP OR RP gun for the amateur DIY guy that wants to base/clear his car? I have 80 gallon 2 stage compressor so air is not an issue. The last paint gun I used was 30 years ago, a siphon paint gun so this is all new to me.

[@UndergroundPaintKing]

@@legalsan3913 I’m glad the video was helpful and depending on your setup as far as your exhaust of the paint fumes, I think you would be fine with any style spray gun you go with but the lvlp will have a lower amount of overspray than the other spray guns

[@sharonkirven9570]

EXCELLENT!! It truly can’t be explained any better❤️❤️❤️❤️😊

[@UndergroundPaintKing]

Thank you Sharon I appreciate you checking out the video and I hope the information helps 🙏🏽

[@sharonkirven9570]

Hey King!! I’ve got a question, it doesn’t pertain to this lesson, but nevertheless I may not be the only one needing this knowledge. If your base coat is wrong and you caught it and didn’t proceed to clear, Should you sand the base off and start over or just sand it lightly and spray the correct color on. Note: this is for a primed new purchased panel and a sanded bumper that was already painted but just needed the new base color. In other words one pc is new maroon pad sanded then sealed and base colored, the other pc was just a different color so sanded and sealed and base sprayed. I know this is a lot so take your time when you have time. No hurry here!! Thank you as always, you know I think your the Best!!❤️💙😊

[@UndergroundPaintKing]

@@sharonkirven9570 you normally have a 12 hour window before you have to apply your clear and after that you need to scuff the base to clear or respray the base then clear so I have to ask you is the color you have sprayed just not matching or is it a completely wrong color because if it doesn’t match but it’s close and within that window I would apply the correct color then proceed to clear

[@sharonkirven9570]

@@UndergroundPaintKing Ok that’s what I thought but thought I’d chk with the Pro.. The color is a bit to dark. It’s in the same family just a hint to dark. So I thought after clear coating it, it may go darker. I’d hate to waist good clear coat and have to purchase both again. It looks like I can sand the base off and prep to respray a closer base coat. Going to let a auto store here put the computer on another part of the car to get the base closer. I went with the code but it’s too dark..Thx U Thx U Thanks!💙😊

[@UndergroundPaintKing]

@@sharonkirven9570 you’re welcome Sharon I hope it works out for you!

[@thegreatpatsy]

Thanks so much for explaining things nice and clear and to the point!

[@UndergroundPaintKing]

You’re welcome and I’m glad the video was helpful and appreciate you checking out the video!

[@belos65]

Hello! Thanks! Too many good videos. I have painted a Bumper. And when I set up my AeroPro A608, no Air came out. I have set my Air Compressor so that it holds at least 4 Bar up to the Gun. And then I have an Air manometer that gives the gun 2 Bar of air. And the gun's own air screw is fully open. That's how I had it set up yesterday. And then it went well. But now only clear coat came out, when I tried the Spray Pattern on a cardboard box. I wonder if you can figure out what is wrong. I have cleaned the gun after I finished the painting yesterday. And I have assembled the Gun, after cleaning it in the Right way. Thanks! From an Amateur called Tommy from Sweden

[@UndergroundPaintKing]

I appreciate you checking out the videos and I hope they continue to help Tommy!

[@jonathansmith875]

Can you touch on air pressure. What too much psi will do and too little will do. That’s the only thing missing in this video. What causes when you spray your base coat on let’s say a hood or roof and after it flashes off it’s rough textured and like gritty? Too much air pressure? Thanks good job with the videos.

[@UndergroundPaintKing]

This video was more about setting up your gun but I’ll put a video together on the air pressure topic to help out Jonathan…I appreciate you checking out the video!

[@MuscleCarMike]

Yeaa i need to know that part too

[@nixonn3]

I think it varies on the gun

[@futuresdojo]

@jonathansmith875 here's the best video I've found! Exactly what I needed to learn before I even started shooting paint on my surface: kzbin.info/www/bejne/iWSxl4asd9p8ZpIsi=Fc8kWZ8v5-Dk7Hox

[@bear_vibes5130]

I like about a 5 to 7 inch fan myself. Gives better control. Keep em coming bro.

[@UndergroundPaintKing]

I agree Bear and I appreciate you checking out the video!

[@bear_vibes5130]

@@UndergroundPaintKing Alot of spraying I do is from an airless sprayer or air assisted sprayer. Where the tip size means alot.

[@UndergroundPaintKing]

@@bear_vibes5130 I’m gonna do a video on tip sizes as well because I think it’s important and the people definitely need to know

[@bear_vibes5130]

I agree for sure. I do historical restoration of old Grosse Pointe homes.

[@alexlove2588]

Thanks for the channel king... I just purchased a Tekna Basecoat Gun, but it seems to either spray dry or lay down way too much peel for me to want to fool with it. It saves material well, but I need help dialing in the settings. Thanks again. PS, that vevor gun is bossed up, and so is the air gunsa. Smh

[@UndergroundPaintKing]

You may want to try turning your pressure down a bit and getting a little closer to your panel when spraying, also the material you’re spraying could be causing it to peel if it’s drying a little to fast

[@BLACKRAIN390]

GREAT VIDEO, IN FULL DETAIL....

[@UndergroundPaintKing]

I appreciate you checking it out Rain💯💪🏾

[@Imwright720]

2k primer is on and ready. Spraying tomorrow for the first time with a gun. When I sprayed the 2k the pattern was always heavy at top and bottom. Since it got sanded it didn’t matter. Hopefully I get the good pattern your showing. It’s a loaner gun from an old time sprayer, iwata 95 I think with a 1.4 tip. Hopefully I can get it spraying like your showing. The rest is on me and God. It was so buggy today. I’m outside spraying a huge truck lid.

[@UndergroundPaintKing]

If it’s spraying top and or bottom heavy you should try closing your fan to even out the pattern

[@Imwright720]

@@UndergroundPaintKing I will try that next time, thanks. Base coat clear coat tomorrow with a much better but very old gun. Hopefully the weather and bugs will cooperate. I just put up my pop up cover and I will surround it with plastic. I’ve got 2 fans set up with filters to draw out any overspray. We will see if it works. It’s not a show truck and the paint clear was peeling so it will be much better.

[@UndergroundPaintKing]

@@Imwright720 I’m sure it will turn out great!

[@cregxy]

Awesome video

[@UndergroundPaintKing]

@@cregxy I appreciate you checking it out!

[@Grant7]

We appreciate you UPK

[@UndergroundPaintKing]

Thanks Grant I really appreciate you bro!

[@GarageNoise]

Great video bother! Keep up the good work!

[@UndergroundPaintKing]

Thanks I appreciate you checking it out!

[@ralphbeek9257]

Thanks for the help, great information, straight to the point

[@UndergroundPaintKing]

You’re welcome Ralph and I appreciate you checking out the video, glad the video was helpful!

[@jack91522]

Thanks for the tutorial. You're the best!

[@UndergroundPaintKing]

Thanks Jack, I appreciate you checking out the video!

[@garbagemann9167]

Thanks for all the tips and making your video ….anyone else besides me tell you that you sound just like Ice Cube?

[@UndergroundPaintKing]

You’re welcome GarbagemanN916 I appreciate you checking out the video and yes I have been told that I sound like Ice Cube lol

[@adamscoggins4553]

Thanks for the info

[@UndergroundPaintKing]

You’re welcome Adam, I hope the video was helpful!

[@ganeshnarayan5505]

Thanks for showing how to set it up i just got my gun about a week ago,

[@UndergroundPaintKing]

You’re welcome Ganesh, I’m glad the video was helpful and I hope you enjoy your spray gun!

[@theroughblueram114thgen5]

I set my A610 up as you showing . It’s leaking in front of trigger where needle passes through to tip and cap 🙁

[@UndergroundPaintKing]

Did you tighten the nut the needle goes through?

[@michaelfolchetti4624]

Thanks MR UPK!

[@UndergroundPaintKing]

You’re welcome Michael!

[@mixtoure]

This was helpful King. Appreciate it

[@UndergroundPaintKing]

You’re welcome Willie I’m glad I could help and I appreciate you checking out the video!

[@jamesadams3476]

Excellent video upk on setting up the spray gun. I do have a question do you adjust the fluid output on your gun for different job's. And when you spray clear. Keep them videos coming.

[@UndergroundPaintKing]

Thanks James I appreciate you as always and I actually keep my fluid control the same throughout my whole process and may change up my air pressure or fan pattern if necessary

[@TeamSchaeffer]

I'm back again got to get my pen and paper out I'm back to studying for next paint job lol

[@UndergroundPaintKing]

Lol I’m glad the content could help bro 💯

[@davidcrystalprater73]

Thank you for the video and the information. I have aquestion about your fluid setting though, you say you like to set it at full/wide open so I am wondering if when spraying you are pulling the trigger all the way to complete stop or just enough to get the material you want, kinda like using the trigger and your pulling pressure to control the amount of fluid you are actually getting out of the gun?

[@UndergroundPaintKing]

I actually do both David!…for the most part I’m completely squeezing the whole trigger but in certain areas I may only squeeze the trigger partially to mist in paint in tight areas, just really depends on what I’m doing. I hope that helps

[@davidcrystalprater73]

Thank you and yes that does help me, as far as your fan do you turn it all the way in and then start backing it out until you get the pattern 6 or 7 inches or are you turning it all the way out as in full fan/ wide open when you paint?

[@UndergroundPaintKing]

@@davidcrystalprater73 You can turn it all the way out and then close it 1/4 of a turn

[@michaelfranklin4921]

Great video King! Thanks! 👍🏾

[@UndergroundPaintKing]

You’re welcome Michael I appreciate you checking out the video!

[@ShoeHefner757]

I just need to use it for clear coating headlights. What setting do you suggest for that?

[@UndergroundPaintKing]

I use the same settings as I use for painting a vehicle Here is a video I did on clear coating headlights kzbin.info/www/bejne/n3zTgGhtoM-trs0 I hope the video helps!

[@checko78na]

Very good tutorials bro! 👍

[@UndergroundPaintKing]

Appreciate that and hope the channel continues to help!

[@marcdesantis3183]

Excellent tutorial.

[@UndergroundPaintKing]

Thanks Marc I appreciate that and appreciate you checking it out!

[@whiteboy3888]

Great vid, was just what i was looking for 💪

[@UndergroundPaintKing]

I appreciate you Gabriel and glad the video helped!

[@dw1hkdavidtkwong]

Thank you for your informative video.. I am a newbie just order my lvlp gun will definitely set up the gun as you shown me.. Can ask what air pressure do I need for paint and clear coat.. I brought a cheap 1.4 nozzle for base paint and gloss. I also order a 1.8 nozzle for primers.. what other advices can you give me or which of your video would you recommend me to watch. Thank you again.

[@UndergroundPaintKing]

You’re welcome and the products you’re spraying will determine how you want to set your air pressure. It’s best to do test panels to set your spray gun up and practice before doing your project, hope that helps David

[@dw1hkdavidtkwong]

@@UndergroundPaintKing Thank you my man.. I will.. please keep on making those wonderful videos.. I can learn so much from you.. Will go through more of your old videos to get the basic..

[@UndergroundPaintKing]

@@dw1hkdavidtkwong you’re welcome and I hope the videos help!

[@chris01479]

Thank you for the video. I find it is very helpful. I have got the same spray gun as you have got and I can't wait to get it started. So I have got a question. Do you recommend if I should only adjust fan control to change the pattern?

[@UndergroundPaintKing]

You’re welcome Chris, and the fan control is how you adjust the fan

[@chris01479]

@@UndergroundPaintKing You are welcome. Is the fan control the one I need to adjust the spray pattern to make it small to big?

[@UndergroundPaintKing]

@@chris01479 yes that’s the one you need to adjust

[@chris01479]

@@UndergroundPaintKing Oh I got it. What is the two other ones is using for?

[@UndergroundPaintKing]

@@chris01479The one at the bottom controls the air coming into the spray gun and the other controls the amount of fluid coming out of the spray gun

[@phunkstar7347]

Can you use a LVLP spay gun with a very small compressor? 6L (1.5Gal ) Compressor for small paint jobs. Like max 50x50cm ? Max output of the compressor is 95 liter per minute. nice video very clear explained

[@UndergroundPaintKing]

I personally haven’t tried spraying with a tank that small but I would think you should be able to as long as you’re spraying small parts…I appreciate you checking out the video Phunk Star

[@gerardolopez5875]

@@UndergroundPaintKing @ then if i have a 60 gallon compressor, it would be better this gun ?

[@UndergroundPaintKing]

@@gerardolopez5875 it’ll definitely work well with a 60 gallon compressor

[@shawn9878]

Appreciate ya , working hard to help newbs like me.

[@UndergroundPaintKing]

You’re welcome Shawn and I hope the channel continues to help out!

[@shawn9878]

@@UndergroundPaintKing you know it , hey but listen iam struggling with this high build primer ,I got the same setup as you ,using a 1.7 tip it's sprays so dry what's up.and thanks for the knowledge

[@UndergroundPaintKing]

@@shawn9878 what kind of pressure are you spraying with?

[@shawn9878]

@@UndergroundPaintKing at the tank was 50# and gun was 27ish

[@UndergroundPaintKing]

@@shawn9878 try dropping your pressure a little and see if that helps

[@justingl0324]

My question is, what size tip do you use for Sealer, Base and Clear and what PSI do you set them at with these LPLV guns?

[@UndergroundPaintKing]

I use a 1.3 tip personally and the psi can vary between the different materials but I normally stay in a range of 26-30 psi with the products I spray

[@justingl0324]

do you use urethane, ACRYLIC URETHANE or ACRYLIC ENAMEL when you paint with these settings/tips?@@UndergroundPaintKing

[@williefreeman416]

How do you water sand after use?Spray the clear coat on an automobile

[@UndergroundPaintKing]

Depends on the appearance of the vehicle that I’m trying to achieve

[@gerarddavis853]

I have a LVLP gravity gun and when I go to adjust my pattern it seems to skip. What am I'm doing wrong?

[@UndergroundPaintKing]

Sounds like some type of blockage in the fluid

[@joeyg9837]

What should I do if I’m painting a bumper and I get a couple spot of running drips

[@UndergroundPaintKing]

In your base or in your clear? Or are you spraying single stage?

[@limonbrotherscustoms322]

I just hit the subscribe button brother,thanks for the info

[@UndergroundPaintKing]

Thanks Juan I appreciate you subscribing to the channel and I hope it helps you!

[@BT-ih6kr]

Good info UPK...and it didn't make me want to buy something. Win!

[@UndergroundPaintKing]

😂 thanks B T I appreciate you and this one definitely keeps some money in your pocket!

[@kenmartin1048]

UPK, just curious about what brand of base and clear you use. I've typically used lesonal base and tamco clears. Lesonal base is spendy and wondering if there is a cheaper alternative. Very thorough teacher. Thanks

[@UndergroundPaintKing]

I use Shopline and DBC which are ppg products Ken but to be honest with everything that has been happening with the economy prices having been going up so I’m see a increase on the cost of materials also…the clear that I use is Evercoat High Solids clear and Grant 7 Oh My Clear

[@vicshonebethel9934]

I appreciate you bro thanks for sharing 👍

[@UndergroundPaintKing]

You’re welcome and I appreciate you checking out the video!

[@rcs0296]

great info,thanks for your videos

[@UndergroundPaintKing]

You’re welcome Richard I hope the videos help and I appreciate you checking them out!

[@dennyperdue1608]

What size tip are you using for single stage??

[@UndergroundPaintKing]

@@dennyperdue1608 I’m using a 1.3 tip

[@pedroflores5570]

Boss man! Can I paint kitchen cabinets with that gun?? I’m a house painter and I would like to give my customers a better finish for their kitchen cabinets,handrails,bookshelves and such! But no other house painter I know would show me hoe to use a gun like this one…

[@UndergroundPaintKing]

Yes sir you can definitely use this spray gun for that, I have talked with a lot of people who love using it for that very purpose

[@straplyfedj]

Yes u can. I’ve used it to paint a house, garage door, dog house, etc. its really a game changer.

[@dougkratz5269]

Hey King, great video! What was the pressure regulator at the bottom of the gun set at?

[@UndergroundPaintKing]

Thanks I appreciate you watching the video and I honestly don’t know what the pressure was set at, different materials require different air pressure so whatever material you choose to spray may need some adjusting to get it where you want it

[@michaelfolchetti4624]

Thanks,MR.UPK!

[@UndergroundPaintKing]

You’re welcome Michael, I’m glad the video was helpful and I appreciate you checking it out 🙏🏽💯

[@MrElliotGear]

hey any recommendations for what psi to spray at for base and clear with the lvlp gun? having problrms getting more than 22psi with my 50l (11 gallon) compressor thanks

[@UndergroundPaintKing]

It’s best to do test panels to figure out the best psi to spray at, so I would drop your pressure and see what works best for you

[@michaelchaney3101]

You got video of airless paint gun I. E vevor, avanti, ect?

[@UndergroundPaintKing]

@@michaelchaney3101 no I don’t, sorry!

[@michaelchaney3101]

@@UndergroundPaintKing man I seen it done with single stage black it looked like that black third gen you painted. Hint hint.

[@borna430]

Hi King, what size compressor are you using with that gun?

[@UndergroundPaintKing]

I’m using a 21 gallon compressor

[@georgetipsword]

curious what was the air regulator set too? thanks ,I enjoyed this.

[@UndergroundPaintKing]

I may have had it set around 26-28 psi George, I appreciate you checking out the video!

[@georgetipsword]

Im Learning so much today watching your videos. I just purchased all my equipment. Your guide coat video was very useful trick. Ive subscribe and set for reminders. Would dig a hoodie or tshirt .

[@UndergroundPaintKing]

@@georgetipsword I’m glad the channel is helpful and I appreciate you subscribing to the channel and if you would like to purchase a tshirt or hoodie you can do so on my website www.UndergroundPaintKing.com

[@nuxboxen]

Well done my guy!!! Thank You

[@UndergroundPaintKing]

Thanks Nux Boxen I appreciate you checking out the video and I hope it helps!

[@ryanmillsap8645]

Good vid man. Keep em coming

[@UndergroundPaintKing]

Thanks Ryan I appreciate you checking out the video!

[@johnnyberlinn1663]

Thanks for the knowledge

[@UndergroundPaintKing]

You’re welcome Johnny I hope the information helps…appreciate you checking out the video!

[@MQT-]

Thank you

[@UndergroundPaintKing]

You’re welcome MQT!

[@anharahmedlife]

Full fluid even if a small compressor?

[@UndergroundPaintKing]

@@anharahmedlife yes you can go full fluid with a small compressor

[@gyffjogofl7676]

Good stuff

[@UndergroundPaintKing]

Thanks Gyff, I appreciate you checking out the video!

[@remingtonsteele8779]

Thanks so much for your videos! I haven't used a sprayer before and just got the a610 on your recommendation. Got all my supplies now and was wondering about 1 thing. Do you keep the internal filter in your gun, or do you just rely on straining it? Thanks! (wish my luck)

[@UndergroundPaintKing]

I strain everything and I don’t use the little filter that comes with it. Good luck 💯

[@remingtonsteele8779]

Thanks bud! @@UndergroundPaintKing

[@UndergroundPaintKing]

@@remingtonsteele8779 you’re welcome!