How To Setup a Roll Race Bike and 200MPH Speedo Coding Unlock, 2023 BMW S1000RR

[@Naldo_S1K]

Now this is how you start your Saturday! 🏁🏁🏁

[@fathertimencUSA]

I lowered my 2022 S1000RR two inches and didn’t cut anything. I took a heat gun and heated the plastic and pushed it up with the round part of a ratchet enough so it cleared the shock. Very easy to do and does not involve cutting the plastic where there is a hole there.

[@stfu6397]

Always such complete, well explained videos, great job.

[@jackskrant9419]

Just got my sprocket and chain, going to try this with my FBO 23’ with e85 tune and report back!

[@dave_stunts]

Looking forward to hearing this too man. Wanna get a s1k next year 🤝

[@patricksifuentes1068]

Quick question what exactly is full bolt on? I’m looking to do it to my 21 s1k but not too sure

[@jackskrant9419]

@@patricksifuentes1068 bt full induction kit, iat relocate, flapper delete, air filter, and velocity stacks

[@saifmohammad4840]

I really love how stock the bike is❤❤❤.

[@ryzon993]

1. Is the same value 01 70 on a kmh speedometer? 2. Is it possible to code to use navigation, music and Bluetooth together in Racepro mode? 3. Is it possible to code to deactivate the exhaust flap in the menu and automatically close the flap again when you restart? Thank you for your videos, they are very helpful. ❤❤❤

[@CubanRider]

Great content. It'd be interesting to see if a taller 200/60 tire would allow for an extra 1-2 mph improvement to the top speed.

[@eazyrydermoto]

It does 250lbs rider 2021 S1k 200/60 supercorsa doing 205mph gps bt stage 2 sprint filter and stacks

[@Supercharged1976]

So what your saying is my 380 lb butt can't be fast? :-( I see this first hand. When a stock Streetfighter with a 180 lb rider is dead even and then kind of pulling me on my 230 hp Z H2. I just sleep at night knowing my BIKE is way faster just not with me on it. LOL!

[@skywalkerrider775]

I am 290lbs and have a ZH2 yes we big guys will never be as fast as a lighter guy but you have to admit the Zh2 moves our lard asses around pretty well!

[@theone5902]

Lose some weight and you 2 will be flying

[@Supercharged1976]

@@skywalkerrider775 Oh absolutely! LOL!

[@johnharris3335]

Y’all hilarious

[@johnsimms3693]

Im 215 , 5'8 .. think im perfect on my bike ... Sorry im not shaped like a woman 😂

[@jeff90445]

You should do this type of build on the M1000RR

[@taylorarango228]

Where do you get the Beamer utility tool? Do you guys have a link? Also do u need the license one?

[@citocaraballo7839]

Great video

[@chaz951]

Good video 👍👍👍

[@paulizulin4926]

Is it working for 2020 s1krr M package ?

[@Ken_Myette]

Why would any of the changes you made effect the speedometer? Isn't the speedo sensor located on the front wheel ABS ring

[@jessefpv9217]

Stock wheelbase 05 ZX-10R how much do y’all recommend Lowering the front. It’s stock height right now. But I do have lowering links on the rear. But I put it back to stock height because who ever lowered it didn’t lower the front any. For example if I lower the rear let’s say an inch. Should I lower the front and inch as well or half of inch? I see a lot of people lower the from 1/8th of an inch why is that?

[@s1krr_Greece]

You should try 16/41 and let us know 🫡🙏

[@gorandude01]

Does this work for a gen 2?

[@Scorpio_S1k]

Tried this on my 2022 with 17/43 gearing and a 190/55 rear tire.speedo maxed out at 180. Any suggestions?

[@eazyrydermoto]

I’d love to run roadkill against this bike set up for set up and see how they match up it looks like it pulls hard with that 44 t sprocket

[@Scorpio_S1k]

I ran the 44t on my bike and lost top end compared to my 43t sprocket

[@Michigang_S1k]

Where do you get the Beamer utility tool?

[@THEREAL-BOZ]

I went to do this with my 2024 s1000rr and gs 1911 and i found the 1 thru 4 something and 1 thru 4 display speed and it lost me haha any videos with doing this process thru gs1911

[@connellramage3303]

so if i’m stage 1 bren tune, the bimmer utility coding is not needed? or is it still needed to get over 200 mph? too i’ve seen is 192, not sure if that is the cut off or if that’s really how fast it’s hitting

[@connellramage3303]

nevermind, kind of getting it now after hearing it needs to be bren flashed as well

[@oceanlifestyle2371]

how light is the carbon fiber wheel compare to stock?

[@BT_Moto]

@@oceanlifestyle2371 compared to cast, it’s a substantial difference

[@oceanlifestyle2371]

@BT_Moto those are nice, love carbon fiber

[@natecote1971]

Why didn't you show us any of the 60-150 runs!? Also why dont you mess with front sproket? why did you go with a 525 chain over a 520? I had raced some zx10 this weekend, and we did 55 pulls in 1st and 2nd. In first i just wheelie way to much, and he kept getting a good 2 bikes on me. When we took off in 2nd, I pulled out and won every time bit it was close and I dont like close. I replaced all the plastic with carbonfiber, just ordered core moto wheels with ceramic bearings, ordered a 44t rear stock front 520 chain and sproket. I will order a few different sizes front and rear. Its tuned arrow headers/mid with stock akrapovic muffler, bt velocity stacks, iat relocation, custom flapper delete. I replaced every visible bolt witj titanium ones feom probolt and just ordered a set of straps. Also going to come up with a way to plug the rear brake line so i can remove the rear disc and caliper and one front disc/caliper for roll race days only. Myabe i should make some vods of this

[@s1kguasa]

you should

[@LoyaltyOfBrotherhood]

Do you really have to change the chain for the 44t rear sprocket I still the original m chain on my bike 23 S1k Or can I get away with just swapping the rear sprocket and pushing the wheel back as far as I can

[@BT_Moto]

@@LoyaltyOfBrotherhood you can just swap the sprocket but keep in mind we used a new chain to push the back tire to the end of the swing arm, which helps the bike not wheelie. All these little things come together to help

[@LoyaltyOfBrotherhood]

@@BT_Moto I appreciate the info no shortcuts lol

[@skylourwalton7339]

@@BT_Motoso to push the wheel back as far as it will go you need the 525 chain?

[@BT_Moto]

@@skylourwalton7339 it’ll go back a little on the stock chain but you need more links to max it out. That’s why we swapped the chain out

[@XKV0814]

lean issues?.just bought your 2 inches lowering kit

[@Naldo_S1K]

I had the 2" kit, but put the 1" kit on after a couple of months. The 2" kit is great for roll racing, but completely changed the dynamics with regards to lean angles.

[@BT_Moto]

Maximum lean angle will be reduced slightly and the bike will be a little less flickable, but only noticeable if you’re a track guy. If you drop the forks properly (our DIY) video, you’ll be surprised how well the bike feels after lowering.

[@Naldo_S1K]

I should also mention that I have the BT strap kit along with the 1" lowering link. It's honestly the best of both worlds. Strap it down for roll racing, release it for all of your other riding. You also need to still set your wheelie control in your Race Pro menu. That will help tremendously.

[@XKV0814]

@@Naldo_S1K thanks for the inputs..so 1# should be more practical for canyon ridings? @btmoto?thanks

[@Naldo_S1K]

@@XKV0814 yes! 1" drop will work in the twisties!

[@kakorasheed5589]

Good video but you guys forgot K46 (2015-2019) why you guys must make some videos for it

[@jasonmekush5280]

why did dropping 4 teeth on the rear net u 0.2 seconds should have slowed accel but add top speed ?

[@BT_Moto]

Easier to accelerate from 60 with longer gearing

[@brandonhollis84]

Yeah. I don't understand that either. Unless he started from 1st gear with the 42. It should be slower because it starts from lower rpm. Unless that gearing eliminates the 2-3 shift from 60-130

[@BT_Moto]

@@brandonhollis84stock you have to babysit the throttle at a 5k rpm hit. Tire goes straight in the air. Geared longer you just give it 100% throttle and no need to play with the throttle. That along with the slight stretch works wonders

[@bonjangles]

will this work on a 2022?

[@BT_Moto]

Yes

[@PapichoNight]

theres somethign wrong in the draggy pictures you show 4:05 you said 60-130mph but it shows 100-150mph

[@BT_Moto]

You’re right. It was a 4.2 60-130 but posted a 4.2 100-150. They were the same time. Editing error on that one. Good catch

[@ShartintRump]

​@@BT_MotoI thought the smaller the back #...the faster?

[@PapoKingsberry]

I want to add BT to my 24’ S1K but it’ll void my warranty 🫨

[@BT_Moto]

Don’t request a raised RPM limiter and there’s no reason to void. We’re making a video with a dealer now and asking them questions directly about voids and denials. Stay tuned.

[@austinbraden9752]

Not correlating to this bike but what's the best mods for a 2024 rsv4 1100 base like exhast and tune? Is a small can bad ?

[@oceanlifestyle2371]

Educate me.. i thought going more teeth in rear sprocket can improve your 60-130 and make it more acceleration, but base on this video u went less teeth and faster times i dont get it why?

[@BT_Moto]

@@oceanlifestyle2371 it depends on what gearing your bike starts out with and how much power to weight it has, including your final speed goal and application to the specific racing you’re trying to optimize

[@oceanlifestyle2371]

@BT_Moto currently on zx10 gearing stock is 17/39 my 60-130 still need improvement, maybe i will just need to switch bike? Lol

[@Veterans-e2c]

I just don’t get roll racing. Just me I like the track and canyons.

[@BT_Moto]

We like it all, but understand some have preferences

[@ashofficial790]

Would never let that garage touch my bike. Impact wrench for sprocket bolts? Gtfoh

[@Charger-ob8yl]

Just say you don't know how to use quality impact wrenches.

[@ashofficial790]

@@Charger-ob8yl impact wrenches have no place on a bike you muppet.

[@Naldo_S1K]

@@Charger-ob8yl lol. Yeah that comment made ZERO sense!

[@ashofficial790]

@@Naldo_S1K what didnt make sense to you?

[@Charger-ob8yl]

@@Naldo_S1K right. Lotta mfers don't turn wrenches and just repeat shi they read on a forum from 1992, out of context.

[@breathe462]

stupid wasting money