How to Setup Triple Monitors in Assetto Corsa Competizione/ACC with Correct Field of View +/- NVIDIA

[@kitmilo]

This has to be the best triple screen video I have ever watched. You've said in 9 mins what most take half an hour to do per topic. Brilliant and well done.

[@TraumaTeamRacing]

You are both a gentleman and a scholar. Thank you very much for the kind words. That was exactly my aim. Just trying to put together what I wished was out there when I first started up. As I sit here editing the iRacing triple setup video this was some very much needed motivation. You have my thanks and welcome to the team👌🏻

[@kitmilo]

@@TraumaTeamRacing Glad to be here. I do have one challenge at the moment. I have triple 27" curved monitors and the set up works well with Nvidia for iRAcing but in Assetto Corsa Competizione I get severe strretching on the side panels (eg wing mirrors), any thoughts

[@TraumaTeamRacing]

This sounds like an incorrect resolution issue to me. If the size is not correct and too small it would be stretched. I would double check the display resolutions are the same in both NVIDIA control panel and the display drop down on ACC. Hope that helps👍🏻

[@kitmilo]

@@TraumaTeamRacing Found the proble. It was a conflict with my VR settings in Steam. Once I got rid of those I got an amazing picture

[@TraumaTeamRacing]

Glad you got it sorted out👌🏻

[@mrturismo]

"You be sitting and forgetting all about that money you spend on your triple monitor setup". Oh god. That´s one for the heart.

[@TraumaTeamRacing]

I try and find ways to forget it each day😂

[@joagolf77]

I have just entered the world of pc and triples. No idea at all of what I am doing but I have looked at plenty of how to videos but nothing has got in. Your videos have enabled me to get up and racing on triples for all of my sims. Thankyou for your very simple guides on how to achieve all of this. Your a legend.

[@TraumaTeamRacing]

This is a really lovely comment mate, thank you for your very kind words of support. This is the whole reason I make these. I am glad I was able to accompany you on your journey 💪🏻 Any other guides you need, let me know and I can see what I can do 👍🏻 Welcome to Team Trip' mate! You are going to love it here 🤣

[@wwjnz9263]

This saved me from stressing out. ACC didn't match R3E (which is easy to set) and I was about to say screw it, and set this sim aside. Now, after looking at this tutorial, ACC looks right. Thanks a million!

[@TraumaTeamRacing]

You are very welcome! Glad you have ACC finally looking good. Hope you enjoy. It's a great sim!

[@alandahr]

And just like that... Thank you - short and precise. How all "how to"-videos should be. 🎉

[@TraumaTeamRacing]

Thank you for the very kind words 🙏🏻 I'm glad I was able to help you out. Enjoy your triples! 🥳

[@vectieba]

Wow what a difference the correct settings can make, it looks awesome!

[@TraumaTeamRacing]

Glad it worked for you mate! Enjoy the trip's 💪🏻

[@oscarkevinmonte]

This is the best tutorial on Web for set up triple screen monitor... That's the difference between who master what is Saying and who not! You're AWESOME dude! Congratulation!

[@TraumaTeamRacing]

What an awesome comment mate 😊 Thank you so much for the kind words of encouragement! I hope you have a wonderful triple screen journey! It is really a game changer!

[@mattnevoso5873]

I struggled for a year with poor triple screen setup and fov thank you so much!

[@TraumaTeamRacing]

Hi there Matt 👋🏻 Glad this helped you! Once you were lost, now you are found brother 💪🏻

[@glitchinthematrix9306]

I love the professionalism of this dude!

[@TraumaTeamRacing]

This dude loves your comment 😎

[@FATGUYRacing143]

I have struggled with FOV for weeks this video fixed it in 9 mins. Thank you

[@TraumaTeamRacing]

You are most welcome Mark! Glad I was able to help you out 😁 Hope you enjoy!

[@cra1g1483]

Thx for this. Helped immensely with my recent triple monitor setup. Cheers!

[@TraumaTeamRacing]

You are most welcome Craig. Glad I was able to help with your setup. Hope you enjoy it!

[@Lurch-11]

Thorough, yet short and sweet. Appreciate this a ton!

[@TraumaTeamRacing]

Thanks a lot Lurch! Really appreciate the nice feedback 💪🏻 Glad it helped you out!

[@AllardWolff]

Thanks for this. I am going to set up a triple screen rig in 3 weeks, so this video should help loads!

[@TraumaTeamRacing]

You are very welcome! Good luck with the build and drop a comment if you have any issues 💪🏻

[@davidmack9842]

I'll echo @Mark Goddard's comment from 4 days ago. The one thing that most triple screen videos don't include are full details on how to *position* the monitors, and that's the thing your video does better than any other I've seen. I'm getting delivery of two monitors today (fingers crossed) and your instructions, I'm confident, will be invaluable. Cheers!

[@TraumaTeamRacing]

Hi David! You are very welcome. Thank you for these very kind words of feedback. I'm glad you found it useful. I also have made one for iRacing and AMS2 which you might also find useful if you're new to the game💪🏻 Let us know how the setup goes. Triples is a game changer and you should enjoy them👌🏻

[@Melodize95]

Hey man, big thanks for this video and your triple monitor setup guide for iRacing!

[@TraumaTeamRacing]

You are most welcome 🙏🏻 Really glad I was able to help you on your sim racing journey 💪🏻

[@joshuahill3618]

Excellent video, the content, physical setup and in game values is more than most vid's on this topic but in a much shorter length. One possible error correction, I believe if you have bezel correction enabled in nvidia surround then your in game bezels should be set to zero. If you don't use bezel correction then set the in game bezels as described in this video. At least that's what looked right to me.

[@TraumaTeamRacing]

Thanks for the feedback👌🏻 I found with bezel correction for me there is technically a blank space in between the monitors and the adjustment in the game served to correct that. I tried both and that's what worked for me👍🏻 As long as it works for you that's the main thing😊

[@danjbirch]

Yes I found the same, with bezel correction set in surround, in game bezel should be set to zero. Excellent video regardless.

[@Magnet4806]

This is still the best explained video. Thank you very much.

[@TraumaTeamRacing]

I love comments like this! Thank you so much Magnet!

[@justincutler7480]

Excellent video, this made things really easy to understand and set up.

[@TraumaTeamRacing]

Glad to hear I could help you out Justin! Enjoy your triples! You will never go back 😅

[@marklewis2727]

Super good video, going to make setting my new monitors so much easier! Thank you

[@TraumaTeamRacing]

Thanks for the kind words Mark! You are most welcome😁 What monitors have you gone for? 👀

[@marklewis2727]

@@TraumaTeamRacing Gone for some Gigabyte 27" G27F-2 1920x1080 SS IPS 165Hz monitors. Tomorrow and Saturday i will be getting it all built.

[@TraumaTeamRacing]

@@marklewis2727 You're going to have a great time! Hope it all goes well and that the build is smooth and succinct.

[@mjuloski]

Best video on that topic i've seen so far ! THK !

[@TraumaTeamRacing]

You are very welcome! Happy you found it useful😊

[@mjuloski]

@@TraumaTeamRacing No doubt yes ! If I am not mistaking you are also using the incredible simlab vario vesa adapter ! Easiest way to have 3 monitors well aligned in less than 1H !

[@TraumaTeamRacing]

@@mjuloski Haha! That is very well spotted my friend. You have good eyes👀 The Simlab Vario Vesa Adapter is the best way to go in my opinion if you have a triple setup. I am really fussy with accuracy and I don't think I would be able to achieve my precision with monitor alignment without them. Do you also use them?

[@mjuloski]

@@TraumaTeamRacing Yes, I use them ! Thank you Simlab ! Essentiel tool !

[@TraumaTeamRacing]

@@mjuloski Great minds 🙌🏻🙌🏻🙌🏻 SimLab make some really good stuff I feel.

[@SvenKitz]

Many thanks and all the best from Austria 😉👍👍👍👍

[@TraumaTeamRacing]

You are most welcome! Hope you find it useful👍🏻Schönen tag😊

[@eskayler66]

I probably get it right this time..... Good teacher.

[@TraumaTeamRacing]

Thank you very much for the kind words Lico! I am glad you got it sorted 👍🏻

[@SvenKitz]

Many thanks from Austria 😉👍👍👍👍👍

[@hj-redravenheng3822]

Great content, helpful and clearly explained - well done!. Subscribed!

[@TraumaTeamRacing]

Thank you for the kind words and the sub! Welcome to the team! Glad I was able to help you out😁

[@TheGuWie]

I use the little program "Display Magician" to quickly enable or disable nVidia Surround. Nice video. I will try that.

[@TraumaTeamRacing]

I have never heard of this! I shall have a look at it. You are very welcome. Glad it was useful 👍🏻

[@TheGuWie]

@@TraumaTeamRacing ​ It's a nice program and was given permission by the author of the fov calculator you use to integrate into it as well. I have it in autostart. BTW: I was always very reluctant to use NV surround as I was limited to 60hz when enabling it. So I was astonished by your recommendation to use it and very surprised to see at 2:13min that you use it with max refresh rate. I used it with 3 monitors each 27" 1440p 144hz but 1 was a different brand. Quickly checked the Nvidia requirements and found out that *same* model is recommended. So I ordered a 3rd one same model that arrived today and voila: surround with 144hz. wow. Reminds me that the things you think you know but that are not true are the ones holding you back. Now I race in ACC with 7800x1440p on Epic Preset with DLSS Quality at average 180fps and 1% lows at 120. What a difference to 60fps. So your video was really helpful to me on more than one finding. Thx!

[@SankarshanGhosh]

@@TheGuWie Hey there! I recently got an RTX 4070. Not sure why but DLSS is not helping AT ALL in ACC. It works fine in other games but no difference whatsoever in ACC. I get around 100fps in triple 1080ps. You must have a monster PC to push 180 in triple 1440s

[@TraumaTeamRacing]

​@@TheGuWie I must have missed this reply I am sorry! I am glad you managed to get things set up nicely. The matching monitors is Almost mandatory I feel unfortunately. Thank you very much for the kind words 🙏🏻

[@TraumaTeamRacing]

​@@SankarshanGhosh I think there might be something else going on here. A 4070 should more than be able to cope with that 🤔

[@kaygfeller27]

Hello, thanks for the Video. Could you tell me which of the 3 interior cameras do you use? I tested them and they all feel different.

[@TraumaTeamRacing]

Hi there, I'm not in front of the PC at the moment. There should only be one option that feels right and scaled appropriately if things have been set up correctly.

[@travisbartlett1977]

Great information. How would you change the FoV degree using a curved monitor? I was looking at a ultrawide until I seen your videos. Truly helpful and thank you

[@TraumaTeamRacing]

Thank you for the kind words Travis! For a curved monitor treat them as a flat screen and measure them from corner to corner horizontally. This makes the most sense to me and have advised people similarly who have had good results.

[@jJustPlayingNZ]

It is now 2024 and I have searched the internet to see if ACC has a sensible Triple Monitor method. This is the best video I can find .... but .... I don't know about SRWE being a massive pain but nVidia surround is an even worse pain. The real pain is that ACC still doesn't have, as far as I have been able to discover, its own Triple Monitor tool. Assetto Corsa has an excellent one and to me it is inexplicable that ACC doesn't. It is enough to stop me ever using ACC and lead me to give it a big thumbs down review on Steam

[@TraumaTeamRacing]

What is the problem you are experiencing with NVIDIA? I use this as my preferred method and have no issues? The triple monitor setup in ACC I felt was relatively straight forward.

[@jJustPlayingNZ]

@@TraumaTeamRacing Surround is distorted and on my PC for some reason causes crashes so I abandoned it long ago. I just don't see why if some racing sims have excellent tool for triples others don't so I limit myself to the ones that do. Setting up custom resolutions often freezes my whole PC. Just why should I bother with shenanigans if the developer can't be bothered. I reward the sim developers who bother.

[@TraumaTeamRacing]

Surround is not distorted as I've demonstrated in the video. However, you must do what is right for you soldier 💪🏻 A shame you can't get it to work as you are missing out on a great sim.

[@jJustPlayingNZ]

@@TraumaTeamRacing OK if that's the case I apologise. It has always been distorted for me every time I have tried it on various sims. I also would find it a bother switching to surround just for one sim and then back to normal for other sims. I still think the developer is letting their (potential) customers down in this case by not providing an easy method in the sim. (I suspect the marketing people don't care about the small number of triple users). At the moment I just won't buy any further sims that do not include proper triple support. None of this is any reflection on you. You are providing a great service with these videos.

[@TraumaTeamRacing]

@jJustPlayingNZ No offence taken at all and thank you for the kind words. I'm trying to help as I think you might be doing something wrong. ACC does have proper triple support and should not appear distorted for you if the guide has been followed 🤔

[@dollzman]

I have 1 question. Which height and distance under the camera settings are correct? I use triple 32” with eye distance of 600mm and angle of 60°. Thanks for the video! It’s perfect

[@TraumaTeamRacing]

Hi there, Glad it helped you👍🏻 Once the perspective is set it is like moving a seat in the car. It is very subjective. Adjust it as you would a real vehicle until you are in a comfy position where you can see your mirrors. Your wheel base is usually a good guide using the in game steering column. I hope that helps👍🏻

[@FranktheTank92]

great video, thanks!

[@TraumaTeamRacing]

My pleasure Frank! Glad it helped you out 💪🏻

[@wirklich_niemand]

Forget SRWE and use Borderless Gaming instead. You can set it up the same way but it actually remembers the process and automatically spans the window when ACC is loaded. no more tabbing out.

[@TraumaTeamRacing]

Thanks for the suggestion. I'll check it out as an alternative👍🏻

[@sidae86]

thank you very much for your video. I have a question, in the triple screen acc settings, the width of the screen is measured diagonally? because I have a doubt Thanks a lot

[@TraumaTeamRacing]

You are very welcome👍🏻As stated in the ACC menu, it is the width, not the diagonal measurement you need. Hope that helps👍🏻

[@MrPatrickfx]

@@TraumaTeamRacing good question. Not sure though where it is stated. It is very unusual to put this information. I bet 20% of people get it wrong !!! Or i am completly fool :)

[@MrPatrickfx]

@@TraumaTeamRacing I could probably add on top, should we include the bezel or not in this width.

[@TraumaTeamRacing]

@@MrPatrickfx Measure on top like I did in the video 👍🏻

[@billyleungkt]

Thanks for your video instruction. Just wonder what's your PC specs to run triple 2k smoothy and what's your FPS?

[@TraumaTeamRacing]

You're very welcome👍🏻 I'm running a 3090 GPU and I reckon I get around 100fps but I'll check next time I'm on the sim.

[@FATGUYRacing143]

Thanks!

[@TraumaTeamRacing]

This is my first super thanks ever! Thank you very much mate! Glad the video helped you in your journey 💪🏻😁

[@WillOstrick]

Perfect thank you very much :)

[@TraumaTeamRacing]

You are very welcome Will! Glad it was of some use to you👍🏻

[@s54yellow1]

Thanks for your sharing. Do you think triple curved monitors offer better result than flat one x3 for sim racing? If yes, are they apply same setup method?

[@TraumaTeamRacing]

Hi there, thank you for the feedback 😊 This is a bit nuanced and I don't think there is one right answer. You just have to decide what you want. For me (my opinion only😅), I went out of my way to get 2K flats. The angles can be more accurately measured as you would have to treat the curves as a flat surface to get your angle right. I also didn't want to have to match the radius of curvature (ROC) as I wanted 180 degree field of vision. To get that for me I would have has to break the ROC which would have annoyed me. Lastly, in a car the windows are flat so I thought that would match flat screens (less scientific I know😅) However, many enjoy the curved triples. For me, I believed it would have annoyed me. Hope that helps a little or at least food for thought.

[@s54yellow1]

@@TraumaTeamRacing With limited G-sync 32" monitor selection in the market, I decided to give a try for a Samsung G7 curved triple monitor setup. Let you know the result later.

[@TraumaTeamRacing]

You'll be happy either way I think. Its all very subjective. That's an awesome monitor and you should be very happy with them. I was considering them too😊

[@captain_sp33dy]

the SRWE isnt very good from what i wasa using it. it wouldn't be centered well and you would see the thottle and brake bars on the right screen with the margin at 1920/1920 in the ingame hud settings. in the end i had to use Custom DSR Tool and bordless gaming tool to get the ideal settings.

[@TraumaTeamRacing]

SRWE is not ideal and does take a bit of tweaking to get right. Good you managed to get it working. I'll check out the 2 programs you mention👍🏻

[@regis8089]

Subscribed, excellent video!

[@TraumaTeamRacing]

Thanks a lot buddy! Glad it helped you and thank you for the sub! Welcome to the team💪🏻👍🏻

[@1961itsme]

Great - Thank you

[@TraumaTeamRacing]

You are very welcome😊 Glad you found it helpful👍🏻

[@shannonm3841]

I was worried this was complicated 😂

[@TraumaTeamRacing]

Hopefully I made it uncomplicated 😅

[@metalsteel9129]

hi , great vid , but for me it wont work. 3 screens working out of game but in game even after enabling triples and settings in view optons , im stuck on single screen. nvidia setup was used. have no idea what to do next.

[@TraumaTeamRacing]

Thank you very much! If NVIDIA is not working for you have you tried using the work around with SRWE?

[@TheVempex]

amazing video thanks! Will this work for a 27x34x27 inch setup? I currently have 1 27 inch and 1 34 inch monitor and thought about getting a 2nd 27 inch for surround

[@TraumaTeamRacing]

I don't think this would align properly. Get 2x 34" or 2x 27" and you are golden.

[@TheVempex]

@@TraumaTeamRacing thank you very much!

[@TraumaTeamRacing]

@@TheVempex I'm not sure how much I helped there, but you are welcome 😅🫡

[@Razorlol42]

First of all, Thx for this Video. Got a question: is it possible to run a 16:9, 21:9, 16:9 Triple Screen Setup in ACC or will i get Problems. Thanks in advance.

[@TraumaTeamRacing]

You are very welcome mate! For ACC there is not a way to enter for the individual monitors I am afraid. It assumes they are uniform. You might be able to do this with AMS2 however. Only one way to find out 😅

[@Razorlol42]

@@TraumaTeamRacing Thanks Mate :D

[@TraumaTeamRacing]

You are very welcome buddy! Pop into the Discord when you have done it, would be interested to know your result.

[@GUN69_]

Your angle for the side monitors is 60' but if you don't have that much space in thd room, would you be able to set up side screens narrower (i.e. 70' or 75') and then set the following angles in ACC or that is too much of the angle and it would distort the fov? 🤔

[@TraumaTeamRacing]

Hi thanks for the comment. I think an angle of 70-75 would he pushing it and might make for an uncomfortable experience. Although I have never tried it. As long as you calculate the FOV correctly it should all be in the correct proportion.

[@larsmars]

any idea if you use a mix of monitors? ie a wide monitor 21:9 in the center and 2 x 16:9 on the left and right. How do you configure this?

[@TraumaTeamRacing]

I believe you can, but it is definitely easier if you don't. I imagine you would just calculate the respective values for each monitor. You would probably have to take some liberties with the calculator as that will work things out for a 16:9 image.

[@damiengvideos4337]

Going to have to give this a try without Nvidia Surround...surround does not play well with HDR.

[@TraumaTeamRacing]

Best of luck💪🏻 Really? I'm running HDR with surround and I haven't had any problems. What happens when you use HDR?

[@damiengvideos4337]

@@TraumaTeamRacing The HDR toggle isn’t even listed when surround is on. I’ve read some Nvidia drivers it works and others it does not

[@TraumaTeamRacing]

That is bloody odd. Have you got it enabled in Windows? Isn't there a separate HDR toggle in game?

[@marioslrzn]

I have surround setup but for some reason the resolution does not show up on ACC, doesn't give me that option

[@TraumaTeamRacing]

Have you tried changing between full screen/borderless/windowed etc?

[@nick-dm3if]

My issue is that its only showing 2 and wont let me check the 3rd monitr

[@TraumaTeamRacing]

Make sure all monitors are the same spec and all connected via the same cable i.e. display port. Make sure these are all seen and configured in NVIDIA control panel.

[@pato17rio]

Thank you

[@TraumaTeamRacing]

You are very welcome👍🏻 Hope you enjoy.

[@to_QWIK]

So when I add the bezel width in ACC from 0 it makes it off and not line up, as this is already done through Nvidia surround so I need to leave it on 0 instead of 8mm. Is this normal, if I set it to 8mm things don't quite line up right.

[@TraumaTeamRacing]

Being completely transparent my bezel free kit is still in it's box and I have yet to make the video. My understanding is you need to set the bezel figure to negative number and this should compensate for the change with the bezel free kit.

[@olevet75]

Am sorry new to this stuff, my question is is it possible to fit 3 screens retro games on 1 4k screen. Am wanting to try f355 challenge triple screen arcade version on my oled lg 4k teli

[@TraumaTeamRacing]

I don't have any experience with this game and would not be able to answer. A quick Google search would indicate that others have done it. So I believe it does look possible.

[@PocketRockets86]

Really thx for this Video,i try the non Surround version but i have a Problem, i can See the Image on the middle and the right Screen But on left Screen i See the Desktop. maybe you have any solution? I use this Variant because i have a 144hz in the middle and two 75hz Monitors on the Sides and when i activate surround i only can choose 60hz. Only If i lower Resolution to 3....X960 i can choose 75hz. Sorry for my bad english :-) Maybe you know what i mean and you can Help pls? Thx for this Video

[@TraumaTeamRacing]

You are very welcome. Try offsetting the corrected image in SRWE by -(whatever your horizontal resolution is) to see if that compensates and shifts the image for you. Isn't 60Hz across all of them good? I wouldn't have thought you could have one higher than the other. You are probably limited by yout side monitors.

[@DriverUnknown2]

Hi there just followed your settings but its only applied to my middle screen both left and right no signal at all when i open acc

[@TraumaTeamRacing]

@@DriverUnknown2 Did you watch the whole video or just copy the settings? You should not have any problems.

[@DriverUnknown2]

@@TraumaTeamRacing i followed it all on home it works across the 3 monitors as soon i open acc its only the 1

[@TraumaTeamRacing]

Make sure you have triples enabled. Failing that, this sounds like a hardware issue. Try rolling back your graphics drivers or reinstalling. Hope that helps 👍🏻

[@FranktheTank92]

Hi, did you have the issue that all settings in the nvidia control panel where gone after a restart at some point? i set everything up according the video yesterday and today when starting up the pc everything was gone^^ BR

[@TraumaTeamRacing]

Haven't had this problem. All the settings save and should reload exactly as set up. If you disconnect and reconnect your monitors this might force you to reconfigure but otherwise should be fine👍🏻

[@MrLuckybob222]

Following the directions, I get 3 separate screens, but they are all on the center monitor. The left & right monitors show the desktop; all 3 views are on the center monitor. Any ideas?

[@TraumaTeamRacing]

Best guess you haven't set in game resolution correctly. I'd rework all the steps again. You shouldn't have any issues if followed correctly👍🏻

[@madsr57]

Looking at SAMSUNG 55" Class CU7000B Crystal UHD 4K triples. Any difference than using say a Samsung G7?

[@TraumaTeamRacing]

Plenty....refresh rate being one of them. Check out these 2 resources to help with your decision: www.rtings.com/tv/reviews/samsung/cu7000-cu7000d#:~:text=The%20TV%20also%20doesn't,crisp%2C%20especially%20in%20bright%20scenes. www.rtings.com/monitor/reviews/samsung/odyssey-g7-c32g75t

[@PatrickHaggan]

I followed your guide. Love it. I question. Screen width in the in game menu. My screen is a 27 in asus. the screen width is 24 inches, 610 MM. I input that in the in game menu and I am virtually siting on the dashboard. I am guessing I am doing something wrong I just can't figure out what. Also, my eyes are 710 MM from the screen..

[@TraumaTeamRacing]

Make sure all your units are the same. But if you have 27" screens that might be correct for you. With 32" the dash is close.

[@PatrickHaggan]

@@TraumaTeamRacing Went back and double checked the numbers. and they were all correct. at 610CM have zero peripheral vision. I can't even see my mirrors. I went out until I could see the digital dash..

[@TraumaTeamRacing]

You will have to play with your angles until you're happy. Part of the trade off of smaller monitors I'm afraid. I wouldn't compromise a correct FOV.

[@user-cg9kb5my9z]

where do i fine your links to the software please what about assetto corse through content manger is it the same set up aswell

[@TraumaTeamRacing]

Links to what software? It's all in the video. Video for content manager is in the works 👍🏻

[@VibesForever]

how did you get the hz working right? mine limits to 60 even tho all of my monitors are 144

[@TraumaTeamRacing]

Can be a multitude of things. Incompatible monitors. I use G sync. The cable needs to be able to handle it (I use DP 1.4) getting a good cable is reassurance too. Making sure there is nothing limiting it in your display settings. Just a few that come to mind.

[@VibesForever]

@@TraumaTeamRacing all my cables are fine they are all running 144 on their own it’s only when I try to span the screens to 3x1 that it limits me down to 60. I’ll try g sync. I might just need to buy all matching monitors

[@TraumaTeamRacing]

If your monitors are not all matching this I am pretty sure will be the issue. I've seen a few report this.

[@VibesForever]

@@TraumaTeamRacing is it possible to 144 with a wide screen in the middle? Atm I have an AOC 34 inch 144hz and two Samsung 144hz so I’ve just been very confused

[@TraumaTeamRacing]

I believe it will be the monitors not playing nicely with each other. I'd always recommend matching if possible. But I realise many will have financial limitations that prohibit this.

[@robloyst4514]

But your custom resolution won’t be listed in acc if using srwe right? Mine just says 1920x1080. I select that then fire up srwe. That works too right?

[@TraumaTeamRacing]

05:28 The steps are explained in the video👍🏻

[@leem0401]

For curved monitor, do you measure the curved width of the monitor or a straight line distance?

[@TraumaTeamRacing]

I would think that measuring the curved width would be the best one to go for as this is the actual pixel width. However I don't have any experience of this I'm afraid. The tricky part would be angle measurement I think and I would suggest measuring from the edge of the monitor to the apex of the curve of the monitor. Hope this helps.

[@Ryan48093]

Will this method work for the original Assetto Corsa or only Competizione?

[@TraumaTeamRacing]

A separate guide for Assetto Corsa is in development 👍🏻

[@michaelmarsalli2924]

Hi, is there any recommendation for the angle the monitors should have in a triple setup?

[@TraumaTeamRacing]

Hi Michael, this is covered in the video at 03:04 onwards.

[@ddsracingfl]

Hi, SRWE running just C disk, all my games on disk D, how open D disk on SRWE? Thank you

[@TraumaTeamRacing]

It should recognise it. Is moving your games to drive C an option?

[@mrFiiSKiiS]

"This way is crap. Use nVidia surround!" "I have an AMD card." "What's that?"

[@TraumaTeamRacing]

Thank you for your comment. My understanding is AMD eyefinity works much the same way to NVIDIAs surround so would imagine that would be your best route if you don't have an NVIDIA GPU. All personal preference of course👍🏻

[@zhonglouis]

感谢分享！

[@TraumaTeamRacing]

非常欢迎你😊

[@chris20001965]

What if you are using monitors of different sizes and resolutions?

[@TraumaTeamRacing]

This would be a bad idea. Refresh would default to the lowest and you'd be limited by your lowest resolution. Also heard of NVIDIA just not playing nice with setups like this.

[@dimrocksosabby2553]

Struggling with getting this to work while keeping my forth monitor going above the middle, Nividia surround just disables it entirely, also struggling to use keyboard shortcuts for enabling/disabling surround for quick changing since surround absolutely nukes my resolutions for my open programs. Also since I enables surround the first time windows wont recognize my 4th monitor anymore but nividia control panel does but wont let me enable it

[@TraumaTeamRacing]

If the monitors are configured correctly in NVIDIA it shouldn't cause a problem. I run a 4th monitor with no issues. I also don't have any issues with resolutions changing and I run surround all the while. I think there is an error in how the monitors are configured in NVIDIA.

[@dimrocksosabby2553]

@@TraumaTeamRacing My issue was I was using a HDMI input for my forth monitor which nividia didn't like for some reason. Got a DVI adapter an its working like it should. Thank you for such a quick reply! Your video was very helpful in getting me setup

[@TraumaTeamRacing]

You are very welcome! That is strange though. I use a HDMI input for my fourth monitor and have no issues. Glad you managed to get it all sorted though. NVIDIA can throw some curve balls from time to time 😂

[@RichardHarknett]

How do you make a 4th monitor work for an above display for discord etc?

[@TraumaTeamRacing]

You configure it using NVIDIA surround. Tutorial coming soon 👍🏻

[@elite_red_panda1273]

Is it possible to only have surround on only when you're on a game and turns off when you get off the game? (Automatically)

[@TraumaTeamRacing]

That would be awesome but unfortunately not.

[@PileofDoDo]

Do i still measure straight line on top even tho my screen is curved? or do i measure with the curve ?

[@TraumaTeamRacing]

Hi there 👋🏻 Measure a straight line across the top from corner to corner Nd treat it as a curved👍🏻 Hope that helps.

[@damiengvideos4337]

ok another request LOL...any help on triples in AC (not ACC) without Surround? :)

[@TraumaTeamRacing]

You had my curiosity.....now you have my attention! I will add it to the list👌🏻 Should be getting to making some triple videos fairly soon👍🏻

[@damiengvideos4337]

@@TraumaTeamRacing Every sim has its damn quirks it seems. AC for me will only display on the center screen despite Tripe Screen rendering being enabled and 11520x2160 being specified in Content Manager. All YT searches just concentrate on ACC. But AC has So many great mods, cars and tracks. 😊

[@TraumaTeamRacing]

@@damiengvideos4337 It seems I spend half my time configuring these things than actually racing them😂 I've got AC working really nicely with triples so I've been meaning to do this one for a while. Hopefully shouldn't be too long.

[@tokamurphy]

I have a triple screen setup thats 2560x1080 per monitor. My fourth screen is 1920x1080 - Whenever I change the resolution it doesn't give me the option of 7680x1080, do you know what that is? My game just loads on my middle screen of my triple screen setup.=

[@TraumaTeamRacing]

Hi Toka, another chap had a similar issue below. I think some have issues with a 4th monitor connected. Have you tried without and the SRWE work around should solve the problem if not. Hope that helps👍🏻

[@its_jakester]

If I use this simple window runtime editor workaround for triples with acc will it mess up my other windows? I run my triples for iRacing without Nvidia surround. I do video editing etc. so it’s easier to have individual screens as opposed to using Nvidia surround. Cheers

[@TraumaTeamRacing]

Hi there, you have to initiate every time you boot the game. When you close it things should revert to previous settings. Hope that helps you👍🏻

[@its_jakester]

@@TraumaTeamRacing I’ll give it a shot. Thanks

[@TraumaTeamRacing]

You are most welcome mate. Let us know how you get on👍🏻

[@its_jakester]

@@TraumaTeamRacing Worked out well...I did have to click the "H.Center" and V.Center" buttons in the Align Window area to get it centered

[@TraumaTeamRacing]

Yes mate!💪🏻💪🏻💪🏻🙌🏻🙌🏻🙌🏻 Love it when a plan comes together💪🏻😅

[@Nicsos123]

Is g-sync working with SRWE?

[@TraumaTeamRacing]

I don't regularly race with this. But when I demonstrated it G-sync was activated as I have G-sync monitors and I didn't have any issues. Hope that helps you👍🏻

[@SamBull]

Not sure if you still see these comments but I'm struggling, I seem to lack the sense of speed when I set it up the way you have described, I sit further away then most just because of a desk and my other screens, any advice would be very much appreciated.

[@TraumaTeamRacing]

I see all 👀 If you have followed correctly that is the true FOV same as if you would get a poor sense of speed if trying to drive from the back seat of a car. You need to reduce your distance to the monitor. Perhaps time to rethink the setup 👍🏻

[@SamBull]

@@TraumaTeamRacing managed to decrease it but it still looks slow. Oh well, I'll just stick to f1

[@TraumaTeamRacing]

@SamBull If you are comparing it to F1. It will be slower. I'd address the distance from screen issue. I sit around 60cm away.

[@SamBull]

@@TraumaTeamRacing yeah I'm at 80 now, because of how I have my monitors mounted, and using a desk, so can't get any closer. I'll keep trying.

[@TraumaTeamRacing]

I think you need a rig mate........this is the way 😏 Time to take the next step into a brave new world 💪🏻

[@nVIceman]

I had to use the entire width of both bezels combined, not just the bezel of one monitor. I tried that and it was way off, then I eyeballed it by aligning things in the sim and came to be twice that number, which is the actual physical gap in between monitors, which doesn't not make sense to me. I came across someone else that had to do the same.

[@TraumaTeamRacing]

@@nVIceman You have definitely gone wrong somewhere 😅

[@nVIceman]

@@TraumaTeamRacing I've measured things multiple times. I'm not inclined to think it's a coincidence the full width in between monitors is the wrong number to punch in. I have 1500R curved monitors if that really messes up the numbers that much.

[@TraumaTeamRacing]

Have you watched and followed the video in its entirety? If followed exactly you should have no issues.

[@nVIceman]

@@TraumaTeamRacing I didn't adjust bezels in NVIDIA Surround now that I think about it, but is ACC expecting that to have been done or does that matter? I would think there would be no additional adjustments if ACC was counting on that. I am also using fullscreen mode.

[@TraumaTeamRacing]

@nVIceman If you corrected in NVIDIA, don't adjust in ACC. If you didn't correct in NVIDIA, adjust in ACC 👍🏻

[@tetleycat1970]

I'm not in the slightest bit technical so need some help. I don't have an Nvidia GPU (got an AMD Radion) so don't think I can use Nvidia Surround. I've tried the workaround and got ACC open in Windowed mode, but the SRWE will not accept the figures in the width and height boxes and just keeps defaulting to totally different numbers. What am I doing wrong? I've 3 AOC 27" monitors. Any help gratefully received.

[@TraumaTeamRacing]

Use AMD Eyefinity to span your screens. It is the AMD equivalent to NVIDIA surround. Then follow as per normal. That should be better than SRWE.

[@tetleycat1970]

@@TraumaTeamRacing Thanks. Are there any videos or help in what I specifically need to do with Eyefinity? Couldn't quite work out what I needed to do, and as I'm totally new to this, none of it is 'normal' to me unfortunately so I'm looking for a real 'idiots' guide. :)

[@TraumaTeamRacing]

This should help you 👍🏻💪🏻 www.amd.com/en/support/kb/faq/dh-014 Then follow my set up instructions for in game. This will just enable you to span the screens across all 3.

[@javierpagan27]

The problem using Nvidia surround vs the second option is that in Nvidia surround I can only get 60 FPS. Unless you know how to fix this?

[@TraumaTeamRacing]

When using surround I'm getting upwards of 100fps. I think this might be a monitor problem. I've heard this happen when monitors don't match. You haven't got the fps limiter on in the options?

[@Pedro-fo4et]

How to do the same on Content Manager?

[@TraumaTeamRacing]

Got that video in the pipe line mate. I will bump it up the que 👍🏻

[@MattinhoGG]

Didn't work. Either it shifted the application to one of the side monitors or it expanded it and left gaps above and below

[@TraumaTeamRacing]

Recheck the tutorial. You must have missed a step, it works 👍🏻

[@MattinhoGG]

@@TraumaTeamRacing Nope. Followed the steps to the letter. Finally figured out how to do it, had to set the x axis to 2560 to get it to work rather than zero.

[@TraumaTeamRacing]

Glad you got it sorted out 👍🏻

[@MattinhoGG]

@@TraumaTeamRacing Cheers. All this stuff would be so much easier if devs would just add proper triple support though 😂

[@TraumaTeamRacing]

@@MattinhoGG I'd just use NVIDIA surround mate. Makes life a lot easier 😅

[@sexyforder]

i dont want to span my screen though, i want true triple screens. whenever i span my screens its Fs them all up.

[@TraumaTeamRacing]

Unfortunately, this is the only way to do it I believe😕

[@1961itsme]

Maybe you have a solution for the problem I have with 3 Monitors-Setup. I've got 4 4k monitors, each 3840x2160 px (all LG, 1 Monitor and 3 TVs - Set to original and just scan). all 4 Monitors are correct shown in Picture-Settings in Windows 11. If I choose one of the 3 TVs in Nvidia-Settings it has the correct resolution of 3840x2160. But if I span all 3 of them to 1 Surround it shows me 12288x2160 instead of 11520x2160 px. So for AC, ACC, or iRacing the setting are wrong an there are missing pixels. For ACC I could improve it, while adapting the menuSettings.json - lastLoadedPresetName resolution to 11520x2160. I wonder, if one could change the correct resolution in Nvidia-Settings. Have you got an idea ? Thank you for your help. Michael - By the way - AC Triple Screen all Ultra 64 fps. ACC, all High, DLSS on 58 to 60 fps. iRacing 84 fps. Not that bad :-)

[@TraumaTeamRacing]

I'll get my head on it, but a couple of things come to mind. Have you tried just connecting 3 monitors rather than 3. I know AMS2 simply wouldn't work with a 4th display connected. It could also be an issue that they are TVs and not monitors? Does the work around with SRWE solve the problem?

[@stevesetsfire]

What does that 36° number mean that is shown as result for ACC in the fov calculator?

[@TraumaTeamRacing]

Vertical field of view 👍🏻

[@stevesetsfire]

@@TraumaTeamRacing but you don't have to input this number anywhere in acc right?

[@TraumaTeamRacing]

@@stevesetsfire Everything you need to input is in the video mate.

[@MrPatrickfx]

@@TraumaTeamRacing I also pointing this out. from what i can underdstans, that FOV calculator in ACC is doing nothing ! Well, i may miss something !

[@brulaapgaapmeester8052]

Eyefinity is what I'm looking for. Al 3 screens work now, but the front screen (steering wheel) is on the right screen, obviously undrivable. Can't find a way to change that, lmao, i feel stupid. Now, I now there are other ways to do it, like with Racoon software or similar, but again I'm too stupid to understand Github. I read somewhere that Eyefinity is no good if you use the PC for other things too, but this is a dedicated racing rig. Driving like this is gonna make me blind, I'm sure of it. Spent a lot of cash on this thing so it is disappointting, also I'm a bit sick ang my brain doestn't work wel. Am I doing something stupidly wrong that you specialists know about?

[@TraumaTeamRacing]

I do have any first hand experience with Eyefinity, however this sounds like you need to set your primary monitor. There is a similar option in NVIDIA surround.

[@themadnes5413]

Would love to get a triple monitor setup, but have no space for it, or i need to move my whole rig (aluminium) to an other room. But then my pc will be like 15m+ away :/ I guess i stick with vr for the time being.

[@TraumaTeamRacing]

VR is great, but if at any point in the future you manage to move to trips it allows a lot more comfort with a trade off for the immersion of VR. VR is still amazing though👌🏻 Can you smash a hole in a wall? 🤔😂

[@hateterrorists]

Doesn't amd eyefinity still work for those using Radeons?

[@TraumaTeamRacing]

I believe AMD eyefinity functions the same way although I do not have an AMD card to test it.

[@stephmic0962]

I don't understand what's happening with my setup, it's not working. I am trying to use 3 43" Samsung 4k TVs. Does this not work? Nvidia breaks everything when I activate multiscreen and I'm forced to disconnect all monitors and restart with only one screen connected. I have tried CRU to get the resolutions of the screens in Nvidia but that doesn't even show the proper resolutions and will not allow me to add 4k resolution, 3840x2160. I tried SRWE as well and it looks like absolute dog sh!t. I don't know what to do to get multiscreen to work! Why is this so difficult. :(

[@TraumaTeamRacing]

You are more than likely connecting by HDMI. Sometimes NVIDIA has been known to play up when connecting this way. Getting new monitors is probably not an option but try connecting by display port using a display port adapter.

[@stephmic0962]

@@TraumaTeamRacing appreciate the reply! I figured out it was as simple as making sure all three TVs were using the same high quality HDMI cables and the same HDMI to DisplayPort connections. Nvidia Surround works flawlessly now. Feel like a dupe for being caught up with something so easy! 😂

[@TraumaTeamRacing]

Glad I was able to help you! Sometimes the solution to the most difficult problems stares us in the dace. Good luck on you triple screen adventure buddy💪🏻 Happy racing!

[@2ndLastJedi]

Do you know of a way to adjust vertical offset in AC/C, now I have a bezel free kit (DIY) AC/C both need this adjustment where AMS2 and rF2 have it but i cant figure it out in Kunos titles.

[@2ndLastJedi]

Even your amazing monitor height for AMS2 would probably be better for ACC as the screens line up in the middle but the top and bottom, the lower part is to high and the upper part is to low on the left and right monitors. Almost like the screens need tk be stretched a few mm upper and lower 🤔

[@TraumaTeamRacing]

Are you sure it's not an issue with the way the bezel free kit is set up? I'll have a look next time I'm on ACC see if I can figure it out👍🏻

[@2ndLastJedi]

@@TraumaTeamRacing the bezel free kit does do weird things to edges but a combination of vertical offset and the resolution height can accout for that. AMS2 and rF2 can be made to look absolutely perfect, but the AC's have this misalignment.

[@TraumaTeamRacing]

That's a damn shame. The bezel kit always interested me. I'll have a look next time I'm on👍🏻

[@2ndLastJedi]

@@TraumaTeamRacing I always thought the wide blurred image would be more distracting than the thin bezels but in AMS2 and rF2 the bezel free kit is so good, in AC/C it's still good, just not as great . Lucky I mainly play rF2 most.

[@mrturismo]

I still get distortions, on both sides.... dont know what im missing here. My sidemirrors are basically the size of my side screens. Totally wrong.

[@TraumaTeamRacing]

Have you tried this using SRWE? It sounds very much like it is not recognising them as separate screens and just stretching your image. Do you have a 4th monitor connected? This can also cause issues.

[@mrturismo]

@@TraumaTeamRacing I do have a 4th monitor physically connected to HDMi, but its not activated in setup.

[@TraumaTeamRacing]

Try disconnecting it completely. Restart the computer and see if that fixes your issue after going through a fresh setup in NVIDIA again.

[@andrewcrawford2093]

does this work on windows 11 because i cant get it to work !!

[@TraumaTeamRacing]

I personally am still on Windows 10 because I like it. I have friends who are on Windows 11 and have no issues. If you figure out a fix please let me know I would be interested to find out. Did you try the SRWE work around?

[@kolton5505]

A question I haven't heard anyone talk about with triples... So My main monitor is 144hz and my side 2 are 75hz... So why is that when I span the resolution, I'm capped at 60hz for all 3 monitors?? Its a horrible change for my eyes to go from 144hz back down to 60 again. literally hurting my eyes. If there's any explanation or way to get higher frames please help a brother out its killing me right now lol.

[@kolton5505]

This was using Nvidia Surround.. My main monitor is a different model (Samsung) but my 2 side monitors (Asus) are the same model as each other. I'm lost here at the moment

[@TraumaTeamRacing]

NVIDIA is creating one giant single image in surround. To display it properly it needs to cap at the lowest compatible frame rate. If it started partitioning the image it would not be surround it would have to start generating independent images for each monitor. Sorry to say but I do not believe there is a work around.

[@davidfrisken1617]

Wouldn't AMD Eyefinity give the same result as Nvidia Surround?

[@TraumaTeamRacing]

I am not familiar with AMD sorry as I don't have an AMD graphics card. If it's their version of NVIDIA surround I would imagine it would give the same result. Although I cannot confirm this as I am unable to test it.

[@mosesm5670]

@@TraumaTeamRacing it is I use triples on assetto with Amd

[@frietkotten6377]

when i use the workround of nvidia my other screens go to like 30 fps or smth while my center one stays at 144.. help how to adjust pls..

[@TraumaTeamRacing]

Sometimes there are issues with monitor mismatch and differing aspect ratios. NVIDIA doesn't like it.

[@frietkotten6377]

@@TraumaTeamRacing is there a way i can fix it?

[@TraumaTeamRacing]

@@frietkotten6377 Not being funny, but changing to monitors that match aspect ratio or brands would probably fix it. Can't guarantee. This I appreciate would be very costly.

[@frietkotten6377]

@@TraumaTeamRacing oh god yeah it is🤣🤣🤣

[@TraumaTeamRacing]

Sorry mate 😅

[@horsefly1020]

Anybody have a problem with acc not having sound using triples? It works on 1st starting he then quits working. It works perfect with IRacing.

[@TraumaTeamRacing]

Hi there, although I can't be sure of your exact problem, I have had the sim occasionally change audio source on me upon start up which results in no sound. It would be worth checking the audio source when this happens both through Windows sound settings and also within the audio tab in the settings of ACC. I found that sound sometimes had been diverted to a bass shaker or something daft. Hope that helps.

[@eagletrippin]

My side screen angle is grayed-out?

[@TraumaTeamRacing]

If it is not showing you have more than likely missed a step. Failing that, check all monitors are same resolution and connected with equivalent cables.

[@eagletrippin]

@@TraumaTeamRacingYou were correct, I forgot to disable fullscreen -- Thanks sir, and thank you for this helpful video👍

[@TraumaTeamRacing]

You are very welcome buddy! Glad it all worked out for you. Enjoy the triple set up 💪🏻

[@atrain132]

1:53 this doesn't work for me. I hit "Configure" and it brings up a box that says Apply Changes. The only option to select is OneDrive.exe, and it does nothing. I've been trying to set up the triple screen for an extremely long time, and nothing has. I mean.... NOTHING!

[@TraumaTeamRacing]

This should work. Make sure all monitors are same brand, all hooked up via display port and all the same refresh rate.

[@atrain132]

@@TraumaTeamRacing yeah, I appreciate the response. I have done all that already.

[@TraumaTeamRacing]

Let me know if you find a fix. Would be interested to know what the issue was.

[@atrain132]

@@TraumaTeamRacing LOL I'm interested to know what the problem is myself. Honestly, I've been dealing with this for just over a year now. I hardly have any time to devote to this right now. I'm home maybe one week out of a month. I think I've tried this twice in the past year? I've literally tried everything I could possibly think of. Everything works fine in Windows with a triple or quad screen setup, but not with any sim games. ACC for instance, the center screen will work, and I can see where it's split for the triple screen on the single monitor, but it won't spread out to the left and right monitors. Even if I manually set it in the code. It's been very frustrating.

[@TraumaTeamRacing]

@@atrain132 You are spanning with surround or Eyefinity right?

[@marcheller]

Does it work with two monitors?

[@TraumaTeamRacing]

You could probably stretch a single monitor image to have something similar to an ultrawide.

[@Chitown388]

Beware, for some dumb reason, NVIDIA-span-display doesn't work with monitors from different brands without reducing the resolution to 1080P and a low 60hz refresh rate. I started my rig with a Sceptre 34" 3440x1440 165hz monitor. Then I bought two Samsung 34" 3440x1440 165hz to upgrade my rig to a triple-screen. Unfortunately, NVIDIA can't span across those monitors and keep the hi-res and the hi-refresh rate, even though my GPU is a fairly capable GTX 3080Ti. It's a nasty surprise!

[@TraumaTeamRacing]

Are they all set up with the same cables and connected via DP? I have heard this happen when DP is mixed with HDMI in some cases.

[@Chitown388]

@@TraumaTeamRacing yes, each used a displayed port off the 3080ti card. Nvidia support asked the same question. Eventually, the support person informed me that sometimes NVIDIA would only support 1080p and low refresh rate when dealing with monitors from different manufacturers.

[@TraumaTeamRacing]

Would be great to know if they had a list tucked away for all the monitors it does this with 🤔

[@Chitown388]

@@TraumaTeamRacing I'm starting to wonder if Nvidia has the same problem across generations of monitors from the same manufacturer. In any case, It seems that Nvidia doesn't have a list of monitor combos that they can't handle correctly. Their support instructed me to collect several pages of spec data for each monitor and send to them for further analysis from escalated support.

[@TraumaTeamRacing]

@@Chitown388 This all sounds less than ideal 😮‍💨

[@ulrichwieland1738]

well i did your guide but now it looks like i am sitting on the dashboard even with -20 offset further away, also i can not make the angle work i dont have that much space on my desk. Also i can´t see my whole dashboard nor the inside mirror.

[@TraumaTeamRacing]

Sounds like you have the wrong camera selected. Cycle through them. It is possible you have changed one of settings I have not adjusted. I would double check everything again👍🏻

[@ulrichwieland1738]

@@TraumaTeamRacing i only changed stuff as the guide said, i am driving with the fixed cam not the helmet cam

[@ulrichwieland1738]

@@TraumaTeamRacing if i turn off tripple screen mode and play around with the fov i can get it looking ok(ish)... but with tripple screen mode on it looks like zoomed in

[@TraumaTeamRacing]

@@ulrichwieland1738 it sounds like you haven't calculated your FOV correctly.

[@ulrichwieland1738]

@@TraumaTeamRacing i did as you said but i think the problem is i sit 1,2 m away from my middle monitor... but i think about getting a vr headset anyways (not just for racing)