How to Setup VoiceMeeter Banana for OBS or XSplit & Streaming to Twitch / Beam + Discord

[@JESSEverything]

I made an in depth tutorial on how to record gameplay with OBS: goo.gl/wzRGl6 It covers scenes, sources, game capture modes, audio tracks, and how to adjust settings for good quality.

[@sc0op15]

can you tell me simply how i use voice meeter in obs so that who i talk to and what they say back doesn't get broadcasted but only the ingame sound does. i use a seinheiser microphone and headset to listen to audio and also the built in mic to chat in ts with other people.

[@JESSEverything]

TheToastMan just dont route your microphone to anything but your headphones.

[@JESSEverything]

So what's your question?

[@JESSEverything]

So your pc really doesn't have a separate microphone and headphones jack?

[@JESSEverything]

I'm not sure if this will work or not, and it's really difficult to guess without being able to try it myself. When you use Discord now, can you hear it playing through your headset? If the answer is yes, then what do you have set as the output in Discord? Is the output set as your headset or as your microphone?

[@rogerg0834]

It's AMAZING how GOOD a tutorial can be when it's from someone that had to learn it themselves. I watched 2 other KZbin videos about "VoiceMeeter Banana" before this one and the difference is night & day. Fantastic job explaining this software. Clear, concise, and to the point!!!

[@BradWaite1]

Hey Jess, thanks for the tutorial. It pointed me in the right direction, but it's not quite accurate. B1 & B2 are not the Virtual Inputs VAIO & AUX. B1 & B2 are *outputs*, just like A1, A2 & A3, (except they're virtual). The 5 small sliders on the right control all the outputs, while the 5 big sliders control the inputs. The VAIO & AUX inputs are are software inputs just like the hardware inputs - but because they're virtual, there's no hardware to attach them do. You can demonstrate this by muting the AUX virtual input in Step 8 and you'll still get audio in OBS. However, if you mute the B2 Virtual Output on the right, you'll lose the desktop audio in OBS. Notice how the meter on the AUX input isn't registering any audio at 12:10 - that's because it's an input, not an output, and it's labelled that way. It's worth pointing out, too, that you can use the AUX input just like you're using the virtual cable - it's essentially a virtual cable that's built into VoiceMeeter Banana.

[@mrmacheesmo1]

3 days I've got nowhere with voicemeeter every video just served to confuse me more, but this tutorial has hit the nail on the head simple to follow and worked a treat. Thank you.

[@_Xiro.Aour_]

I've followed several 'tutorials' and such about how to do this, and failed to set it up. Half-way through your guide and I figured out the rest and finally isolated my discord from my streams. Thank you very much for posting this, isn't it great that two years later your guide is still helping folks out? :) Be well, and thank you again for this handy guide!

[@TheOneAndOnlyxftu]

Getting stream setup was infinitely easier due to this, on behalf of everyone that neglected to say thanks let me make it perfectly clear JESSEverything, you are the man!! Thanks so much for this video.

[@Jackjack1978.]

I have listened to 50 different videos on this and I'm not exaggerating when I say that this video is what you would call a freaking masterpiece! The most epic tutorial of freaking voice meter on the internet bar none!! I would have paid a lot of money for this information. You sir, are a freaking Rockstar! Thank you!

[@636matrix6]

"Click set default" Proceeds to mute my speakers so I cant hear you anymore.

[@metalstorck1625]

same

[@stephenmoss8345]

Go to Banana and set the "Hardware Out" to your speakers. Then when you set the "Hardware Input" you'll be able to hear again.

[@z7r1k3]

You know, captions are a wonderful thing

[@FACEandLMS]

Damn it you beat me to it

[@yugenmix]

nobody have youtube on their cellphones these days?

[@ericpetschl2995]

You are a lifesaver, been searching everywhere for something explained in detail about this. Thought I lost money when bought/donated the virtual audio cable bundle.

[@colindiwa]

Hands down the BEST video explaining how to use Voicemeeter. I watched so many videos on this topic, some were helpful but still very confusing. Thank GOD I came across your video because it was the most straight forward and clear Voicemeeter video I have seen on KZbin. I'd be lying if I said I wasn't still confused lol, but I definitely have a much better understanding on how to use it. Thank you so much!

[@airaandrea703]

I learned more from this video than I did in the entire semester this year.

[@matthewread9001]

I had to rewind a couple times to fully understand, but this was a wonderfully made video. You helped me a lot.

[@richard2mitchell]

i seam to get no game sounds but discord is working fine got any ideas?

[@walker9893]

I know this is 3 years old, but you actually nailed the "i watched all these incoherent, unhelpful videos, here is a good one". Well done. subbed

[@IgraineDraco]

The first time knew about this program, I found your tutorial. Then I did a clean install on my comp, I came to your guide again. And now when I'm setting up my Voicemeeter Potato to work with Reaper, I am now watching your video to learn the fundamentals again. Thank you sir for such a timeless guide.

[@matthewa.seibert1809]

Man, you confused the crap out of me with the B1/B2 thing. Selecting B1 on any input routes that audio to VoiceMeeter Output. Selecting B2 routes the audio to VoiceMeeter Aux Output. It has nothing to do with the Virtual Inputs, and they are not identical.

[@andythebritton]

Yep. All the routing is well explained in the user manuals. A1,A2,A3,B1,B2 are all mix buses. A1,A2,A3 can each be connected to a specific output device (speakers/headsets), B1,B2 appear in the audio recording devices list and can be used to route audio into applications.

[@fontanamarcos]

True, I'm really confused also. You need to read the manual to understand and correct this tutorial.

[@busterfrith8898]

Yeah no idea how he got that messed up

[@captainmcadams]

I have only been playing with this for a few days and read through the manual. Totally do not even need to install the additional VB cable unless you need 3 virtual inputs...

[@bonanote]

He totally absolutely definitely confused the *beep* out , when he wrongly mentions ( on minute 7.59) that the Voicemeeter VAIO is B1 and the Voicemeeter AUX VAIO is B2..........forget it , it's wrong, B1 and B2 are labeled in the "MASTER SECTION" , they are the two last faders and they are recording outputs and work together with the cassette recorder ( i.e you will not be able to hear them through Voicemeeter.. The Voicemeeter VAIO and AUX VAIO are inputs and should be available as Audio Devices in your other pieces of software ( VLC, WIndows Media, any DAW , etc ). It is a pity , because otherwise the video is relatively helpful.

[@DandySlayer13]

This is still what I think is the best and simplest tutorial for Voicemeeter Banana on all of KZbin.

[@effennekappa]

How can someone dislike such a well crafted piece of tutorial? Good job man!

[@JESSEverything]

One guy told me I was jumping around too much and that it was too hard to follow. He also said I was "asking questions that he wouldn't know the answer to", as in rhetorical questions where I'm trying to get people to notice where the desktop audio is showing up in VMB. Some people huh? Thanks for the comment.

[@effennekappa]

I was having audio problems recording via Shadowplay so I downloaded VM and immediately gave up, until someone sent me this video. Now I'm recording with pristine audio quality and balanced volume levels, all thanks to you.

[@effennekappa]

No time wasting, straight to the point, clear instructions, video chapters. Cmon, this is a great tutorial.

[@JESSEverything]

Makes me feel good. Thanks!

[@redrath2]

Considering your video was awesome and just taught me step by step how to use this stuff, I am led to believe it probably has more to do with your youtube "Recommended videos" hahaha

[@JadeInHeaven]

I've been trying all day to separate discord audio onto a separate track from my microphone and game audio and i finally could because of this tutorial so thanks!

[@emilio4187]

I have a question - if you put in the input of any app your orginal mic, as is shown in the video, then people in that app won't hear the "effects" or comp or gate or whatever you are doing in voice meeter, they will just hear your regular mic talking, right? then how do i allow people to hear those settings?? i am really confused because that is the main point of all of this.

[@leadloki]

I love how direct and clear you are being in the video it really helped me follow along with what you were saying. No umms in between sentences. It really helps thanks

[@BlinkCS]

thanks but doesnt work for me. Audio is muted even when setting the hardware out. Rip

[@nye9741]

same

[@dovydas1900]

@@nye9741 Try using MME instead of WDM worked for me

[@poosaykleen]

change your audio input on your taskbar, click the audio symbol on your task bar, if you have more than one driver for audio, change it to the one you previously used.

[@riricorp2827]

This tutorial was absolutely great! I really appreciate you putting in all this work explaining each feature for our education. I'm sure you launched a lot of people ahead with their recording/streaming with this~ Much thanks!

[@nervusbreakdown]

I cant believe what I just watched, Jesse, my man are a god sent. You have educated this man something new and useful. I will save this video because they is by far the best setup I have watched!

[@prodbymai]

i cant seem to get obs to pick up my audio from whatever im running like youtube or something, im really confused and would really appreciate if some one was kinda enough to help me out, thanks!

[@richard2mitchell]

same here....ever get it fixed?

[@erikas314]

@@richard2mitchell I don't know, if you still need this, but you have to link your Desktop audio (B1) to your stream output (B2). So just press the B2 in the B1 column and you're good to go ;)

[@chris4361]

@@erikas314 I did - Thank you!

[@ian8304]

@@erikas314 thank you

[@kiliya89]

@@erikas314 THANK YOU! This saved me so much frustration!

[@SaraPajamas]

I can't get OBS to record any other sound than discord and my own mic. How do i get it to record my game sound??

[@buhr]

You will need to set on B2 at B1 (voicemeeter vajo)

[@Taiyz]

This is one of the best tutorial videos I've ever seen. I was definitely feeling the pain of reading several guides, watching several videos that tell you what to click to get the job done, but none of them really explained why they were selecting those buttons or how the software actually works. I feel like now I actually understand how to use this tool that almost seems to be a necessity for streaming these days.

[@dannyjf8450]

omg dude finally a video that guides people to do it easily, thanks man great video

[@AveMcree]

you lost me at virtual cables. I don't have that option.

[@ZenTiXu]

Install the virtual cables then go to your windows 10 settings, then to system, then to sound, then go to the top left where it says ''Sound control panel'', then right click in an empty space, then click something that says ''Show Deactivated Devices'' and make it Enabled, then whenever you see something about VoiceMeeter, enable it, make it ready, don't leave it deactivated. This is the most I can do, goodluck!

[@RiotaiPrower]

Of all the videos I've seen before this one, this is the only one that literally made me understand how to route my audio through Voicemeeter. Thanks!

[@misskalkuliert3976]

You put so much effort into this, thank you very much. Take my like, my abo and my comment :3

[@ItsSwiftNade]

Wow thank you so much man!!!!!!

[@JESSEverything]

No problemo duderino.

[@CREEDO.]

SHUTUP

[@TheMuffinSh0w]

@@CREEDO. should have said that three years ago

[@popcat9624]

@@CREEDO. don't disrespect my guy. He explained a lot.

[@itzdacrecre8861]

@@popcat9624 true

[@taylxrmade3106]

Just just saved me after 30 minutes of troubleshooting. Only the change to output MME was needed. Even after 4 years. Thank you!

[@EXFGaming]

YOU ARE A F'CKING GOD!!!!! i was looking for something like this for weeks! you my good friend are amazing!

[@oyok2112]

Finally, I just figured out how Voicemeeter works. I've installed it and removed it in rage so many times because I hadn't found this video yet. Thanks so much.

[@verlah]

When I link the CABLE INPUT to discord it makes everything sound delayed, Is there any sort of fix for this?

[@SocialPots]

I got delay too

[@mattgandee1866]

Dude this video is 3 years old, but you literally helped me so much in 2020... Thank you!

[@alpha_uk7011]

On hardware input 2 Virtual audio cable doesnt show up

[@Currypowpow89]

it doesnt show for me either. it only shows in output for me

[@alpha_uk7011]

@@Currypowpow89 I fixed it by downloading and opening virtual audio cable as administrator

[@Elinggaming]

@@alpha_uk7011 did you open it because I did that and it still doesnt show up

[@zecronix2544]

OBS isnt picking up game noise?

[@richard2mitchell]

right...you find a fix for that?

[@zecronix2544]

@@richard2mitchell Sorry for late reply but no sorry

[@ausdruid]

@@AbirBelly Is this around 12:30 in the video - he talks about it ? but doesnt actually 'click' the b2 button (aux virtual input, discord\stream) on the b1 virtual input strip (general desktop\gaming audio)?

[@SirJeppy]

Bro. You. Are. A. Angel. I can’t even begin how frustrated I was the last couple days trying to get all this shit figured out. The way you explained it was perfect! Thank you!!!!

[@vept2565]

whenever I set the Voicemeter Input as my main playback device, I cant hear anything

[@sasu5752]

me too

[@VictorSevenTV]

That's because Input is what's going into the program, I.E. your mic. It's not meant to be a playback device.

[@spyman6880]

But in the tutorial he selects VoiceMeeter Input as his default playback device. Im also having this problem.

[@quinwalker6469]

Me as well.

[@ShadowHPM]

Same anyone know how to fix this?

[@Dandadrummer5]

I love how I cant have Banana open when on youtube though. start up VB get youtube playback error, shut it down youtube fine again

[@OoMikkioO]

Had the same issue. Turned out it was because I opened the wrong VoiceMeeter lol

[@krankbomb]

Sooooo I watched about 5 or 6 videos... I watched your video, then - BANG - it clicked! Thank you for the content :)

[@LeoonYT]

i only have AUX input

[@Willshaper1]

You must download the other VAIO

[@phillipcrofts147]

@@Willshaper1 Can you elaborate please? I too only have AUX input and cannot find any VAIO download.

[@Redback9174]

Great video, however you are confusing outputs with inputs! B1 and B2 are virtual OUPUTS (the sliders bottom right), and are connected to the recording devices in Windows settings (VoiceMeeter Output and VoiceMeeter Aux Output). The sliders you are referring to as B1 and B2 are virtual INPUTS, and are individual (not copies of each other). They are connected to the playback devices in Windows (VoiceMeeter Input and VoiceMeeter Aux Input).

[@kimnig]

Michael Bennett How do I get B2 to also receive windows sounds along with B1? I have tried selecting B2 at the B1 menu but it won't send the audio over :(

[@Redback9174]

kimnig Depending how you have set it up your desktop audio will be on either Voicemeeter VAIO (which is preferred), or on Voicemeeter AUX.. To route the audio to B1 and B2 you need to enable the B1and B2 buttons on the VAIO or AUX slider that has your desktop audio. Hope that helps

[@drabodows]

Hi Michael. Thanks for pointing that out. Almost all the videos on KZbin talking about this program are making this mistake, and misinterpreting the Inputs and Outputs. I was ready to make my own video to explain this issue further...

[@archie4955]

Hey, discord audio is being played through my mic? however if i turn B2 off (under hardware input2) my stream cannot hear people on discord?

[@beongky]

Exactly @Michael Bennett!!! I was near to write a comment mentioning that point but you has did already. Anyway, the best for me between all tutos I figured out.

[@ETIVACtv]

i just start streaming & doing video recording a couple of months ago. i noticed that all my videos got bad audio output . & some of my viewers complaining about bad quality audio . i watched & follow this tutorial of yours. good work bro. thank you very much. now i can stream again with a good quality sounds. i like & subs now .2 thumbs up for this vid bro

[@Lynkah]

Okay so this is alot more helpful than the other videos I could find. However- I still CANNOT get the voicemeeter Aux to have anything BESIDES the things displayed in voice meeter banana. No matter what game I play, no matter how I tweak. The cloned one, Aux gets 0 blips of audio on that black bar that displays sound levels, beside the front-L-R-rear square. I did notice however that if I routed it so that my music goes through Aux and then the stream uses aux. The stream does then pick up the music that I am playing along with microphone, but nothing else. Those are the 2 I have set up through a cable and my physical microphone, in voicemeeter.

[@Lynkah]

Okay so I think my issue is that the B2 should not Exist. It doesnt recieve default audio, it ONLY recieves what you give it from banana. So you give the stream everything except the things you have routed through a virtual audio cable. By giving it the B1 virtual input and then making it so that my virtual cable outputs to neither b1 or b2 but instead straight to speakers. From what I tested it works. Stream isnt getting music from VLC but is getting my mic, my voice, my game and whatever web pages I am browsing.

[@denmarkmafiamusicliveuk9368]

is there a way to use vlc through voicemeeter though as i use that for my music. hope you have solved your issue btw too.

[@3DArtcore]

@@denmarkmafiamusicliveuk9368 yes you can but its a bit buggy and you may need to restart the apps you using in this case VLC , go over right bottom corner speaker icon on your desktop, right click and click open sound settings, you will see at the bottom a large icon says advance sound settings, click it and choose where the output of which program you use will go through .

[@Icessassin]

@@3DArtcore or just use the settings in VLC itself... much more stable. give vlc its own cable to a strip then click b2 on that strip

[@pahir8090]

In my recordings I don´t hear the ingame sound, what did I do wrong?

[@sn0fx]

Is your default recording device the output of voicemeeter?

[@wolv3232]

i already thought about this problem.. i think its because the B1 is only send to your headphones and not to B2, B2 should be OBS and Xplit, but im not sure since i havent tried it myself

[@RootbeerWrangler]

I think that's only because when previewing the video file, it has problems playing multiple audio tracks and letting you hear them. I'm sure if you drop the video into a video editor like Vegas or Premiere, the multiple audio tracks will be there & play in the preview.

[@red_ranger1819]

I wish there was timestamps for some things but this video really helped me especially that bit with OBS! What a simple fix. Thanks

[@Volentry]

One error: Under "Virtual Inputs", Voicemeeter VAIO and Voicemeeter AUX are *inputs*. B1 and B2 under the master section are *outputs*. They aren't the same.

[@TheWhiteNinjaHDGaming]

Didn't work. Followed step by step and only hear mic in recording.

[@JiMiXLRoX]

Yep same problem, because the only audio device selected in OBS is the freakin mic, but when i Add the dekstop audio i have game sound but also get the discord sound dubble....

[@LittleBeeches]

@@JiMiXLRoX Pretty much the problem I was having with Streamlabs OBS. I just decided not to disable desktop audio device 1. Seems to be fine when I record. Yet to have Discord up while recording but I don't use Discord in streams/recording anyway. Still a bit odd that you get no sound from anything bar your voice but at least everything can be heard now lol

[@TheEtsgp1]

Dude thank you this makes my audio sound so much better! quick note if anyone is using OBS to record or do live stream make sure the A1 mic you select to turn un click the A1 button( Turn it off sop you do not get feedback from your mic) , also use the "noise gate filter" in OBS by right clicking on your channel and adding it gets rid of all the white noise and background noise sounds real sharp and professinal. Great video!

[@mikinius]

Dzięki Silv4n działa wszystko idealnie.

[@awaterek]

Uważaj to jest tak naprawdę pingwim

[@mikinius]

O kuwa faktczne ltery wperdla

[@llllIIIlIll]

you can't change audio levels when its coming through virtual cable

[@xThat1Gamer]

You wanna bet?

[@wayneloveswine1]

Ran into a few hiccups, but if I just paused and rewind a few times I think I got it. Great video, thanks!

[@jesperbengtsson3793]

Anyone else having problem with discord not changing the output to Cable? I put it to cable but the sound still comes out to the "windows sound" anyone has a suggestion what might be the problem?

[@JESSEverything]

did you select the proper buttons under the discord section? click A1 to route it to your headphones and deselect everything else. If it doesn't work I can't tell you what exactly you're doing wrong, but just know it does work and it is possible, lots of people use it this way.

[@Scharrelese]

I guess you found out by now but if anybody else is having this problem make sure to set 'CABLE Output' in the Recording-tab of your Windows Sound settings as default.

[@JESSEverything]

Scharrelese Good advice. Wasnt sure what their problem was.

[@vinzler]

I have the same problem right now.. I´ll try that, hopefully it´ll work, thank you in advance^^

[@tazzentazz]

i have the same problem but it doesnt help to set the cable output to default

[@birdbro6776]

I think you should add an annotation to tell people that the need to make sure they actually have "Voicemeter BANANA" and not just regular Voicemeter. In the video you showed clicking the link to the regular Voicemeter and so I did as well. They have different buttons. I was confused as hell. I'll update later to let you know how things went after I found out the mistake I made.

[@JESSEverything]

When you download the program it downloads both versions.

[@birdbro6776]

Oh, it didn't for me. It just dl'ed the regular version. But I found it eventually.

[@JESSEverything]

Roasted Got 'em They'll both be in the same folder. Voicemeeter and Voicemeeter Banana

[@gatorboots7608]

I know this is an older video, but dude this is great! I got so frustrated trying to figure this mixer out. Then I found this. Thank you!

[@overwatchhighlights-funnym7649]

there is no cable output.

[@xandrarue1203]

I had the same problem! Look up this video it helped me VB_Audio Virtual Audio Cable Installation and Use Guide

[@CorvusVidya]

I installed VAC but it's still not there in Voice Meeter.

[@martinwojtczak903]

the same here

[@CH405_]

he states u need to download it, its like step 1 or something. link is even in the description.

[@KodiiViibes]

followed all your advice to a T but still cant hear discord audio. What gives?

[@emilio4187]

I have a question - if you put in the input of any app your orginal mic, as is shown in the video, then people in that app won't hear the "effects" or comp or gate or whatever you are doing in voice meeter, they will just hear your regular mic talking, right? then how do i allow people to hear those settings?? i am really confused because that is the main point of all of this.

[@Ryan-du3pp]

Not only did you help me set this up roughly a year ago, you also just massively saved my life after a driver update reset some of windows default input settings! Doubly thanks!!

[@rahmij2]

i love how he says top turn off all the buttons and now he cant hear the youtube video. My man were watching you on youtube... thank god closed captions.

[@duh_itsmeh1142]

rahmij2 I’m watching it on my phone

[@dee-ic3tx]

or watch it on another device like a smart person lol

[@felipeCL73]

You forgot to send the rest of the audio:( (not Discord) to obs, if anyone has the same problem, turn on "B2" on Virtual inputs- Voicemeeter VAIO

[@harryburnett2915]

I love you thank you

[@Journal_Haris]

love you

[@Bombanade]

DUDE YOU HAVE NOOOOOOO IDEA HOW MUCH THIS HELPED ME!!! I've been having SOOOOOO many audio issues recently and this REALLY helped me. I was trying to have 2 Audio outputs setup so I can hear and talk on one headset and my wife on the other since she games with me and was having SUCH a hard time (along with having a soundboard too and discord) and this fixed ALL my issues!!!!!! thank you ever so much! ill be sure to shout u out on my stream man! MUCH appreciated!!!!!!!!!!!!!!! (I did a private youtube stream to test the settings and it all worked like a charm)

[@clixos5354]

bruh my friends can hear my game with this voicemeter.

[@erikfleer9012]

i have like a massive bass :(

[@erikfleer9012]

when i speak

[@JESSEverything]

theres a thing you can adjust that changes sound levels. perhaps you messed with it on accident? If you double click any of the sliders or buttons it will reset them back to their starting point.

[@OneEyeGamer]

After 98 videos 5 years later this was explained way better then others lol thanks bro 1.5 mill views and only 6k subs. Man yiutube is hard

[@GODSPEEDmain]

THANK YOU SOOO MUCH!!!!

[@timmcneill5299]

Voice meter has had an update, this tutorial needs an update

[@raife9700]

I don't think so man you might've downloaded the normal voice meter on accident.

[@nickbuckettv9799]

I set my stream/recording up with this guide. There were a lot of others videos and articles, but this is by far the most simple and seamless approach to it. Wanted to come back and just say thanks! :D

[@evanvives3569]

so he told me to go watch a KZbin vid to hear so i went to KZbin while i was watching KZbin tp test my headphones and i realized this vid is a KZbin vid dafuq

[@JollyFrogGaming]

I know this is an old video but you've made my day. I was able to set up VM Banana and actually understood what I was doing this time. When I've watched previous "tutorials", I've still come out scratching my head. I get things to work but had no idea how or why. Thanks!! Xx

[@mumgoals1374]

OMG OMG OMG, i have watched like 10 different videos on this but you have explained it so well that i now have solved my other recording issues with my 3rd party programs that i was trying them to work with voicemeeter. God bless you.

[@رنتيسي]

this is the best tutorial for voicemeeter I've ever watched thanks a lot to make things clear to us

[@padtrick]

tyvm, was messing long time with banana. finally i found someone who was able to explain this simple and on point

[@MrSRMatthews]

Got to the party late, but this was the best tutorial on the internet hands down. Thank you so much!

[@livefreeprintguns]

As a nod to Pewds: THIS VIDEO IS STILL RELEVANT GODDAMN IT! I had hoped you would've covered a little more in regards to configuring the AUX channel for OBS/XSplit streaming and how to tie it all together, but regardless very concise video. Nicely done.

[@evenwolf14]

I know this video is 3 years old but it helped me a lot with setting this up and i wanted to say thank you!

[@grintharke]

I still come back to this video after every time a windows update wrecks my settings or I move to a new PC. Still great after 5 years, thank you!

[@JESSEverything]

Thanks :-)

[@themadkhal3860]

Easy and simple directions. I applaud you sir plus you actually explained what inputs meant, like you I have watch a few vids and they rush through or dont explain which each function is. Well done.

[@thedillybot]

This video was a huge help, I had to go through it twice but I fiddle around with things and I got banana working. Thanks again.

[@MoonsFPSStudio]

9:25 The virtual audio cable option dosent appear for me when I try to select it. Send help

[@hearthandmoondesigns]

The best tutorial out there by far, holy cow. I looked everywhere for a really good explanation on this and yours is the only one worth a watch! Fantastic!!

[@TheFulscht]

This is 2 years ago! But man!!! This got my setup working!!! You are freaking awesome!!!

[@TeeYA7]

I watched alot of videos about voice meter banana but I still don’t understand. Eventually I found this legendary video made me fully understand thank you alot.❤️

[@Vaz9999]

What a god ! I was struggling about how to play game while listening to music but not letting it into the record ! This help me out a lot ! Thank you !

[@M4jiK_TV]

Dude, thank you so much for this. I was having a heck of a time setting up my new mic w/ VMB and because of you I had everything set up on the first day, ready to stream. You are the man, there really are too many videos out there that do not explain things as precisely as you do...and the end results showed.

[@JESSEverything]

Thanks man. Drop a link to your stream and I'll stop by :-)

[@M4jiK_TV]

@@JESSEverything Right on my dude, appreciate any feedback you may have regarding my setup as well. Thanks! www.twitch.tv/m4jik_tv/

[@clashofminiatures]

thanks Jesse i wasted 2 hours this evening trying to figure this out, LOL and watched several videos, glad i found yours

[@warlockrakaul5202]

Jesus. I've watched this video at least 50 times and it finally clicked. Thanks for this video!

[@davefrost5955]

Thank you so much, very much appreciated. Spent ages trying to figure out how to use this software and everyone else using it seems to not know how either, your tutorial was very concise and easy to understand

[@tacosaladfn]

Holy cow after watching so many videos and not working, this is the videos that explained everything thank you so much!

[@xubbershub]

Im away from the pc now, and just watching from my phone. I think you answered my questions which I find it hard to see on google. This is very informative and I appreciate your effort on doing this. Cheers and God bless! From Ph

[@karlartable]

For those coming across this video in 2020, the information is still accurate! I just set everything up my self step by step to this video. Working perfectly in OBS Studio

[@Adrobiel]

One thing I found is if you are running music through KZbin it's coming through on the default device, you can't dynamically change the volume unless you use a second input. Also, he didn't mention that you need to send B1 to B2 for the game sounds and say, youtube videos to OBS/XSplit. Do you know a way to set up Discrod so the mic it receives is the master'd mic from VoiceMeeter?

[@iMoolan]

Dude, this became my guide whenever I eff my settings up! Thank you for making the video man.

[@mediatantra7810]

Best explained video over youtube, ppl who dont understand, dont have knowledge of all these softwares

[@quancena5772]

i followed a 2020 tutorial earlier and nothing worked, the audio from my desktop was dirty and i couldnt even control where it went, this is an actual tutorial, years older but infintely more useful!

[@steveewilmington7369]

Still the best tutorial out there! I have to come back and watch it again when I inevitably forget BUT I can always count on this one to show me the way

[@dijae]

This is so much helpful! I just found VoiceMeeter today after buying my Streaming PC + BM800 + V8 so this is so amazing coz I'll be streaming either from Streamyard or OBS!! Thanks man!

[@specificocean326]

I looked for so many different tutorials... So many. Thank you so much for the only one that worked for me! I feel as if this one was very well made because other tutorials rushed everything to make it as fast as possible. But this tutorial went through each step and I really appreciate that!

[@RvnntSoc]

You are the GOAT of tutorials. Thank you

[@HerrShaun]

Finally, this is the one video on KZbin that actually helped. All others were either too vague or got too complicated with it. Thanks for helping me understand!

[@imaboyinblack]

Woah, thanks man! This helped me so much. At first I couldn't hear myself on discord when I click test microphone, and my friends couldn't hear me. But now I can hear myself when I click test and my friends can now hear me! :D Thanks again.