How to Sharpen a Chainsaw: Husqvarna 450 Rancher

Please SUBSCRIBE and LIKE.
WEBPAGE: www.goodgamebees.com
FACEBOOK: goodgamebees
TWITTER: / goodgamebees
GOOGLE+: plus.google.co...
INSTAGRAM: / goodgamebees
Special thanks to the following people for freely sharing their knowledge and expertise in helping us grow:
628DirtRooster: / 628dirtrooster The infamous one!
Alderman Farms/Tommy Alderman: / aldermanfarms
J&J Acres: / jandjacres
Jeff Horchoff/Mr. Ed: / mygracieme
MIGardener: / migardener A great place to buy seeds too!
After watching several videos and a fair bit of research, I think I have gathered all the needed information someone needs who is new to sharpening chainsaw chains, such as myself. I am using a Husqvarna 450 Rancher. Obviously, different companies likely have their own guides and what not they suggest, so double check everything.

[@jeremynolen1980]

It works great! Takes 10 minutes. Just used it for the first time today. Went from dust to chunks! Pulled through the wood like a new chain.

[@K5ATA]

Great to hear!

[@ApothecaryRdy]

Hey man, thanks for the video, wasn't aware of the push only when filing, or what the flat file was even for. Also the tid bit about marking the chain was an easy help! Thanks for sharing

[@K5ATA]

You’re welcome. Thanks for watching!

[@markwilliams3174]

Fantastic video. TY from Australia

[@verdonsharp3173]

The file goes in both holes at the sdme time. 🕳 Great video.

[@PepperandCaseysRV]

Alright just dulled muh chain gonna give it a go got a pixel file kit and a 445 thanks for the vid

[@eaznutts5714]

Good info..... But get a tripod for filming

[@K5ATA]

This is a REALLY old video, in fact, I made this one as an off hand just because I had to do it. I have since gotten a tripod and such, but not for this one, obviously. Thanks for watching.

[@ChainsawChristmas]

This person owes you NOTHING for providing free information.

[@K5ATA]

Thanks!

[@PaulOtis]

Man, I would not ever have the patience for that!

[@K5ATA]

It actually wasn't bad at all. It took about 10 minutes, tops, and it made the saw cut so much better. I always thought it would be a huge, complicated job. I was pleasantly surprised. Much cheaper than buying new chains all the time. Thanks for watching!

[@davidgleason6323]

I’m a newbie, Thanks for the video (albeit a bit aimless at times!) On the Husquavana site they used a flat file on a part of the chain too after the round file. Any experience in that?

[@Chiefbuzzbee]

Good information , think about cleaning the bar and make sure no sappy build up on chain. In can cause a build up on the files I just recently found out. I will be looking for more of what you do KC7TRZ

[@austex995]

Haven't run into sap yet but what would you use to remove it - mineral spirits?

[@kevintelano1778]

Thanks. Need to work on your videographer skill though.

[@K5ATA]

Old video... things have gotten better. Better equipment and such. Thanks for wawtching!

[@kevintelano1778]

Good deal. I appreciate the time you spent to do that. Helped me for sure!!👍👍

[@ChainsawChristmas]

Checked your channel. Zero info on videography. Are you an expert?

[@rafenatho5406]

Dude, your missing half your sprocket cover plate!!

[@Pvlog-wo8dp]

Có bán bộ đồ đũa xích ko

[@sgjdjheuu2055]

Ok

[@Steven-cr8ju]

Your file guide is absolutely backward. The depth guage should face toward the file handle.

[@garyharlan7999]

Those files are not the same sizes one is 7/32 and I can't remember the other one but you can't use both of them on your 450 I believe you need the 7/32

[@misterdoy1e]

By a tripod please.

[@K5ATA]

I have bought a couple of them since making this. I wish I had it then! Thanks for watching!

[@Repent.Believe.obeyJesus]

What did you mean you had to fix dinner ? Aren't you married

[@ChainsawChristmas]

Not everyone believes the Bible bs about abusing women and treating them like servants.

[@verdonsharp3173]

Didn't anyone ever tell you... You need to watch KZbin videos so you know what your doing first?

[@Vanndam41]

Good information, however the video is terrible. I cannot see what you are doing.

[@brucelaatsch8668]

Aweful camera movement. Seen more of the floor!!

[@carlycfs]

Nice try but I got dizzy watching the video because your camera is ALLLLLLLLLLLLLLLL over the place . . . didn't finish . . . dislike !!

[@gregdolecki8530]

........or you use your Dremel with the correct size stone.

[@K5ATA]

That can work as well, but I have gotten to where I would like to be able to sharpen it if I am away from electricity, etc. Thanks for watching!

[@fanningconstruction2050]

Hand is always the best sharpness.

[@buddapimp21]

Jesus, hold the camera still.....

[@K5ATA]

I don't think Jesus would have helped me hold the camera still, but I guess I could try and ask next time. Glad you liked the video!

[@josephshoemate9933]

Stopped watching video due to motion sickness.

[@K5ATA]

Glad you liked the video!

[@gianni1968]

Buone informazioni ma video da mal di testa!

[@andrebruinhorst5565]

Never ever touch a file with your hand/fingers! That’s what I learned from professionals.

[@Schachtens]

Why not?

[@migyverman]

​@@Schachtens Salty sweat can cause rust perhaps.