How To Sharpen A Drill Bit - stainless steel drill bit sharpening

How To Sharpen A Drill Bit - stainless steel drill bit sharpening
about the channel and some other details ---------------
Drill Bit for Metal and Steel do-it-yourself
• How To Make Drill Bit ...
----------------------------
AMAZING! Top 3 Bright Ideas!
Idea With a Drill !
-----------------------------
Idea of the Bicycle Hub!
-----------------------------
Idea With Angle Grinder!
-----------------------------
Top Ideas !
-----------------------------
- Idea With Plastic
Idea With a Saw!
Creative Ideas
________________
-----------------------------
The Secrets of Welding
---------------------
Welcome to MD KHAN channel:
Our channel includes such videos
- Idea angle grinder
- Drill idea
- How to make
- Cordless drill ideas
- Grinder ideas
--------------------
#mdkhan
#stainless
#railing
#steelrailing
#stanlesssteel Get the BEST Price at IndiaMart
Drill Bits : dir.indiamart.com/impcat/dril...
Router Bits :dir.indiamart.com/impcat/rout...
CNC Router Bit dir.indiamart.com/impcat/cnc-...
End Bits : dir.indiamart.com/impcat/end-...

[@jackboot3946]

Most important when drilling stainless steel use a low speed and sufficient pressure to keep the drill cutting. As soon as a drill slips or overheats, stainless becomes very hard and resists cutting, often destroying the drill bit repeatedly.

[@iadr]

Also... Surprisingly, oil often makes the whole situation worse

[@techyy9962]

​@iadr shouldn't, any lubrication is better than non, best is coolant tho ofc

[@Mobile-ct1yf]

Well! I'm a retired engineer and in fifty years I have never seen a drill bit made out of Stainless Steel

[@vinivinivini1000]

Yup...never heard of a ss drill bit

[@kenwhite510]

They are hss high speed steel. Not stainless,I've been working 30 years machine shop,you won't find stainless steel bits.

[@davidmartin7081]

Same here. I think I've read about every publication out there + there is nothing about stainless drills!!

[@GyanenderSirohi]

He meant drill bit for stainless steel

[@jacobclark89]

@@GyanenderSirohi forget it , these people are too smart . You better tell them the truth about the Navy's underwater drill bits , 🤠

[@MDKHAN-9907]

If you like the restoration video then you must watch this KZbin channel and subscribe👇👇👇 kzbin.info/door/x16taH_OnGDXk61c_06bug

[@sebastianpelazhernandmez9176]

Pp⁰⁰

[@ciaosias2445]

@@sebastianpelazhernandmez9176 non subito film porno

[@javiermramirez8367]

]

[@weldingworkssibi1130]

kzbin.info/www/bejne/hKTZmYGYhtB5aKM

[@ahmadtrisnowibowo6890]

HH hjj jangan h MB

[@arafatali1327]

It's the art of parfecting how to cut fingers.

[@tebbink]

Good idea👍👍

[@74lukeleng]

This is better than not sharpening it but you can sharpen a drill bit on a bench grinder or with a hand grinder clamped to a bench in 1/10 the time. I have hand sharpened 100's of drill bits by hand and never had to go thru all these extra steps. Also keep a bowl of water handy to make sure you dont overheat the drill bit while sharpening.

[@ronnieholmquist8999]

Grind little, dip in water, repeat until drill is sharp. Easiest on a white stone

[@dzigusseip8816]

It"s the best philm about dril bit .Congratulation for You!

[@jefrinn1]

Awesome tricks

[@gerardvandijk6807]

Or.... how NOT to sharpen a drill bit...... Unprotected grinder, unprotected fingers, overheated drill, end result is a drill that makes triangular holes because the center of the drill bit is out of the middle. Better invest in a special drill bit sharpening adapter for a bench grinder or a special bench grinder for drill bits and chain saw chains. And use a cutting / cooling liquid from the start in stead of when the drill starts overheating. The basic principle of how the guy sharpens the bit is correct.

[@AS-ug2vq]

What's your qualification for drill sharpening? Is it approved by some government or university.

[@Badpenny13]

@@AS-ug2vq A full set of digits.

[@amazingvideo2869]

@@AS-ug2vq why would one Man need permission from another man on doing anything. Do You ask your governments permission to use the bathroom. Most research is conducted at Universities.

[@yyabay]

you forget the flipflops

[@trgtech9269]

Safety first Make it last.

[@Fab2Mc]

Very good idea 👍❤️

[@magitingtv.7704]

nice.. Sending my full support Sir God bless you sir🙏 from Philippines

[@Mocking69]

Great idea～♪

[@thepipefitterscorner4505]

Long Live Master.👍

[@ironcreativeideas6705]

good👍👍👍

[@thaithinh8080]

mài mũi khoan thế này thì đỉnh rồi

[@ocingManiabundaLK]

Great job

[@bouzianiboubakar1710]

تشفيط المثقاب وهو أن تجعل له زاويتان 6درجة على جهة و120درجة على جهة وتختلف سرعة الثقب حسب قطر المثقاب ونوعية المعدن

[@MetinTetiker]

Mengene titreşimi azaltıldığunda çok deaha düzgün delme işlemi verecektir.Matkap ucu bilemede sıkıntı yok.Gayet güzel.Sipral taşlama ile olmasına rağmen bu kadar olur.Ben de bir zanaatkar torna tesviyeci olarak eldeki imkan ve video çekim güçlüğü içinde ki uygulamanızı başarılı buluyorum.Önemli konu iyi sonuç almak.O da videonuzda görülüyor.Biz izleyenlere tebrik etmek düşüyor.İşleriniz de kolaylıklar diliyorum.

[@ability2450]

Nice

[@pakatzadventure8823]

Thanks for the new information....👍

[@joshuacayton8665]

I see what he was trying to do and did a decent job more aggressive angel for harder metals. But what type of cut off wheel is he using? Is it those 3m type that they don't make any more?

[@vigilante_stark]

It's called an angle grinder here in India. The disc is just any regular one for metal.

[@khoangienghoanghieu3988]

Bạn nên sử dụng mũi khoan chất lượng tốt hơn

[@johnyfernandes3323]

Muito bom!!!👏👏👏

[@steelmaxkoiupalamtirur1998]

Good job

[@Bosjak63]

Dies ist der Nobelpreis! Ich habe so viele Jahre als Dreher gearbeitet und erst jetzt habe ich herausgefunden, dass ich mein ganzes Leben lang nicht richtig gearbeitet habe :)))

[@TheCoilboy]

Drei- und/oder Fünf- eckige Löcher sind als "verdrehsichere" Lösung für eingeschlagene Schrauben sicher von Vorteil. Im Homeoffice. Neben dem "Fensterbank-Tomaten-Giessen". Sogar als Tischler schäme ich mich dafür fremd. 😉

[@sigisalmen2399]

Ganz abgesehen von den ganzen Sicherheits- Krimskrams wie Schutzkappe auf der 'Flex', ein befestigter Schraubstock, Kühlschmiermittel nach DIN, Rauchgas-Absauganlage... Dann den ganzen Tag in Stahlkappenschuhen, Schutzbrille, Handschuhen, Helm und Warnweste. Nun stellt sich heraus daß es auch ohne geht. .... Also meistens

[@jambodenniskibet8209]

Good learning

[@SevenDeMagnus]

Cool, so it can be in a chamfered shaped and doesn't need to be curved, then, like how the factory shapes it? That'd make sharpening easier.

[@tarivoli3104]

Sir i employ yr method of rack in my mc traub a32 function ing supper. I salute sir thanks for ur best guidance

[@phuongtienche139]

Chia sẽ cách mài mũi khoan hay hữu ích

[@5phutsangtao-iQ]

😍👍

[@fadlycruel9961]

Danger! Better than use Drill Bit Sharpener Jig. Safety first 👍🏻👍🏻

[@tariqmehmoodshafqat5471]

Zabardast Beouty full video

[@mmpp6881]

Sharpen on a bench grinder. Check that the point is central and the flutes have the same height by holding the drill up to the light. Slow down the speed and keep an even pressure. Drill all the way in one pass. Very likely this drill cuts oversized because he didn’t check the point is central.

[@Creativity_DIY]

Nice 👍💡

[@rockd3133]

Нет затыловки это так задуманно? Если уж нет наждака , то болгаркой в тисках удобнее выдержать углы

[@giovaniadolfooliveira8131]

Caso a broca não esteja bem afiada e da maneira correta, o trabalho dificilmente sairá satisfatório. Vivendo e aprendendo o que há de bom!

[@diy7716]

good job

[@jesuselcananistade4463]

Me gusta mucho Esa esos trabajos y así por él son cosas que uno lo ve realizar con nuestra propia mano sigue para lante hermano sigue para lante

[@rostygreg4767]

nice technique

[@sankardey4594]

thanks.

[@rolandvasquez7844]

FINE AND DANDY TECHIQUE, BUT WHEN I WAS A MACHINIST ON A TIGHT SCHEDULE I JUST CLEANED IT UP BY GRINDING IN A ROCKING MOTION

[@josimarpereira1624]

Legal 👍👍👍👍👍

[@dzumis1]

What I can see here, that the main feature of this sharpening is a negative cutting angle which results in a lot of smoke, squeaking while drilling and resharpening after ten holes...

[@lamalex9151]

I think it was because he is intended to make the drill bit destroyed in the shortest time

[@360craftdaily4]

Nice video

[@moalawsi5743]

Best way to sharpen a drill bit is on a belt sander bench grinder I use to do it for many years and it worked very good

[@angelfigueroa310]

I don’t think there’s a harbor freight around the corner where this dude lives to go buy one

[@martinmolina6644]

Do you have video?

[@moalawsi5743]

@@martinmolina6644 unfortunately no

[@wateskajen4563]

Sangat bermanfaat.... By las wates

[@Vuive-xomtoi-2024]

chúc bạn thành công trong cuộc sống ♥️🌹👍👍👍

[@DongStone]

We look forward to the consulting experience of major channels like you. Thanks very much....

[@tigernicelava5642]

Thanks for the idea

[@Bradford1able]

Beautiful

[@opytkulikova]

При такой заточке сверло будет перегреваться. Кроме этого сложнее выдерживать углы резания на сверле. Я точу сверла иначе на любом наждачном круге или алмазном. Сверло имеет высокую износостойкость и выдерживает силовое резание. Посмотрите и попробуйте Способ заточки сверла от токаря профессионала. Опыт Куликова. @ Способ заточки сверла от токаря профессионала. Продолжение. Опыт Куликова. @

[@ilyaskolayli630]

Merhaba, öncelikle iş güvenliği bakımından mengenenin tezgah tablasına bağlanması gerekir. Matkap sıkışırsa mengeneyi elle tutamazsınız. Kaza olur. Bir zımpara taşınız yoksa çaresizseniz işlem bu şekilde yapılabilir. Matkabı kesme taşı ile kesmek doğru bir işlem değil, matkap ısınır ve sertliği kaybolur. Ayrıca ölü merkez o kadar zayıflatılmaz ve kesici kenar boşluk açıları o kadar fazla verilmez. Peynir kesmeyecek çelik kesecek. Kolay gelsin.

[@xatab25]

Инструкция о том - как делать нельзя! Instructions on how not to do it!

[@Bosjak63]

Ты не прав ! Именно так и должны выпиливаться дураки, мир станет лучше :)) Его если не диском болгарки зарубит так этим самым сверлом ! Наверняка у этого гения есть и другие опасные игрушки ...

[@michalgebre1289]

Cute your fingers

[@JohnRobertBiate]

It's cool

[@madhutharanga9451]

Budhusaranayi ....!

[@hassindoembro]

👍👍👍😍

[@ianintheworkshop9773]

More facets than a diamond

[@Fab2Mc]

Totally unsafe conditions of working 😂

[@leotinu3302]

It makes perfect holes in cheese after this sharpening

[@jjppsanchez77]

Only on Swiss cheese 🧀 🤣

[@joejoejoejoejoejoe4391]

Step one - blue the tip.....

[@omodepanzaxxxt7842]

wow alla faccia dei sistemi di sicurezza....un disco da taglio su una mola senza protezione

[@joseluismunoz9977]

Nice men , hig,from cdmx

[@MrJsebak]

Köszörülni sokkal egyszerűbb és könnyebb is tuti 😂👍 Fajin rozsdamentes anyagot elcseszed a nagy semmire csak 😜😂

[@helmutlob9945]

Igen nem tud a furot köszörülni

[@MrJsebak]

@@helmutlob9945 👍😂

[@siegfriedutrata4672]

Der Anschliff ist gut. Der Bohrer wird gut schneiden.

[@yohairoalmonte2670]

😲!Hombre debería estar usar guantes!

[@maheshundale4710]

Exact shape oh sharpened tip of drill. Must work faster

[@m.shahidkhan]

Good

[@bronyakz2634]

Good this tutorials mr 👍👍👍

[@floomhoodertribez5030]

Amazing drill bits sharpining..thanks this videos..new friend here full support ..

[@ALEXANDERCRETA1]

Why the holes have square shapes i wander?

[@haleelahamed7342]

You can easily sharp drill bits in bench grinding machine i think this is not correct may be this bit make over sizes

[@nelloalcolemico2766]

this is a wrong way and the results confirm it

[@haasaan9286]

Good luck, engineering!

[@user-vx1vi8gn8l]

สุดยอดคัพ

[@farukagwan2842]

i t company no 1

[@jacobclark89]

Cool , now I know how to sharpen a drill bit so it cuts oval holes

[@kodiangkulim5437]

tq

[@bajouxdaniel7185]

drôle de façon de repasser une mèche

[@carlosroberto6838]

Fantástico

[@saanu79]

White Marking kis se kiya pen ka naam kya hai

[@littlekisna8509]

❤❤👍

[@Kolaychanel]

Nice...good 2 very2 good

[@mallaiahpaidipala1307]

Very good jab beta Allah hommaqar

[@funkensteinthedoctor]

Лето лето улетает мазафака!

[@mohamedmohamed-dd9xi]

безопасность прежде всего

[@Cccclive]

could you tell me what liquid you use to cool down the drill bit?

[@CosmynFire]

I think it is cutting fluid.I use water to cool down the drill bit and works fine.

[@Cccclive]

@@CosmynFire thank you so much, have a nice day

[@user-pahme]

You may use any technic oil for that. Because you need not only to cool down the drill but also to lessen the force of friction between the bit and the drillings.

[@AS-ug2vq]

@@user-pahme no need just use water + baking soda + emulsifier + little bit of oil

[@brewsterly2927]

You should use oil that is designed for cutting like Rocol Cutting Fluid. Bit floats on ordinary oil.

[@josegomez2663]

me parece que esta es exactamente la forma que no se debe hacer XD

[@Wazzinguru]

That's awful! I'm cryin' for the bit...too much time spent, lot of material lost for nothing and iron burnt while cutting the bit...

[@markwiza3839]

Surprised he still has all of his fingers yet. The best way is on a bench grinder did it that way for years

[@Mindgame17104]

Sir Dril karta time kon sa oil ka use kar ta hai please

[@atomicdmt8763]

should have a PILOT hole for holes/bits that large...fyi

[@keremkerem1497]

Best way buy new one

[@aminlim4199]

عجب مته ای

[@eduardocabal3836]

Very unsafe work,, no leather gloves,, grinder unstable and no stone cover,, vise clamp moving,,, injuries happen anytime... I'm doing that on a very safe way...

[@edwardjames2497]

Only beginners use all of these. Experienced people don’t need to.

[@asslowshop396]

Don’t use gloves while using a grinder. Hands get caught very easily.

[@ashokjadhaw2474]

Brother come to India

[@youngshawn9227]

Unsafe? Hahahahahah funny newb 🤣🤣

[@edwardjames2497]

@@youngshawn9227 🤣. Quick question: why would you name yourself Lucifer? SERIOUSLY!! That’s the worst name in the world.

[@ahmedharitani9946]

اين الامان اسلوب وطريقة خطئ

[@evgeniysorokin5796]

Что ж оторвёт ему руку когда-нибудь.

[@mekanikobisdak4490]

Excellent

[@health_secrets_of_moringa]

کمال کر دیا میرے بھائی اس نئے طریقے کو دیکھ کر انگریز بھی سکتے میں آ جائے

[@janmaciejewski1058]

If U overheat(make end blue) a drill bit, U can throw that in garbage. And NEVER use a flexible disk to sharpening drill bit.

[@michaelwierhauser9166]

Not true. High speed steel has excellent cherry red hardness. You can weld it and it's still hard.

[@AS-ug2vq]

@@michaelwierhauser9166 then why drill bit is ruined when you drill it at high speed making squeaking sound? Why is it recommended to drill low?

[@janmaciejewski1058]

@@michaelwierhauser9166 Try, ok? Did U knew, what is drilling? If U want really sharpened fire up drill bit, the best? break up blue end. Or use for soft wood.

[@michaelwierhauser9166]

@@janmaciejewski1058 I spent maybe 20 years in the machine tool industry as a machinist toolmaker. There are dozens of kinds of tool steels. A HSS cutting tool does not distemper when heated to blue. Other steels like A5, A6, D2, O1, 4140 etc., will because they temper in the range of 350F However you can get cutting tools Especially off the flea-bay that are sold as HSS but are not. They are some chinese crap. There are lots of reasons to go slow when cutting metals: the machine is not sufficiently rigid machine to allow you to take heavy or high speed cuts and the vibration will ruin your tools. The heat and pressure at the fine cutting edge will destroy that edge, The Coolants and or cutting lubes are inadequate. On my milling machine the coolant makes all the difference in the world. I can run about twice as fast and take about twice the depth of cut using a synthetic coolant/lube mist as opposed to high sulfur cutting oils brushed on by hand.

[@user-dr9vm4iu1l]

你説得对，這样磨那里可以用。

[@silahimsimrad7487]

How many fingers you have left?

[@qasimsadik9654]

The method is correct, but he should use better protection methods by holding it with pliers, not with his hands.

[@arnelamoguis9323]

Yeah Very nice Idea ..but the safety is important. Thanks man Great Idea.