How to Sleeve a Boxer WRC Engine l Part 3 l 22B l EJ22 l Subi-Performance

[@richardbowles7690]

YOU WIN ! Most complicated CNC tool set-up ever seen on youtube.

[@SubiPerformance]

😂😂😂

[@samsonian]

Actually, I would even enjoy a voice-over explaining the steps as it is pretty involved...unless it’s a trade secret...😎

[@tjlovesrachel]

Paul Johnstone yeahhhhhh that is some shit right there .... wow ... I couldn’t imagine what that costs

[@muhdzuhrisyazwan1535]

I very likes how you emphasize the accuration of engine block. The way of your handling the CNC machines. And the last not list. The PASSION of working.

[@sergejpavlov5427]

I do not know how much you charge for your work. But you do the most outstanding work I have ever seen. So much mesurmens such an accuracy. Thumbs up

[@mirkoghostdriver7082]

Motorenbau ist immerwieder schön anzusehen😍

[@MrPaulCraft]

I don't know what is happening in this video, but I like it a lot!

[@marindamjanic3242]

Love your work, it's the art of precision!!!!

[@trex4586]

That is a thing of beauty! Crazy how much work you put in on that CNC machine!

[@blueslykiller18]

Love how clean everything is

[@Meineoma85]

Die WEndeplatten würde ich immer mit Drehmoment anziehen, da gibt es so vordefinierte Schraubendreher mit teils festem Drehmoment, ansonsten super Arbeit!

[@blacksv1931]

100%

[@rodrigosmusic]

I just now discovered this video. I’m gonna have to open my EJ205 block and it has the Darton sleeves as well. I heard there’s the possibility that the sleeves could have shifted, blocking access to the piston wrist pin. Do you think this is possible? Will I lose the shortblock if the sleeves indeed shifted?

[@joshblount133]

Can't wait to see the finished build on this one.

[@rebel.mma.youtube]

When bored the crank cases where the cases put together with bolts n torqued down?

[@AndrewBeveridge461]

I wonder why the manual feed with the jog wheel on the rear thrust?

[@saibabupodala6297]

How to calculate bore and position and position rings use to replace bore liners measurements in( mm ) formala can u explain some example

[@r.e.x.x.]

@subiperformance , nutzt du für die neuen Motoren eigentlich Einlauf/Breakin Öl?

[@G4Disco]

I really need to send my 2 blocks in for a thrust conversion.

[@ธันยบูรณ์งามขํา]

Your work is really beautiful.

[@plasmator1]

Is the block trammed to the boreline or are you trusting the bellhousing? Great video! :)

[@simsonschrauber05]

Wieso fräst du einen Gussblock mit einem Garant Rotring (eigentlich ausschließlich für Hartbearbeitung) Fräser?

[@kayc9222]

What is the difference between Subaru boxer and Porsche boxer? And why does Porsche extract very high HP per cylinder compared to Subaru? Cool video thank you again

[@peejayem4700]

The Boxster S turbo 2.5L 4 cylinder has 257kw, and Subaru’s STI engines make near identical power in certain iterations

[@samsonian]

@Kays that is a very open-ended question...you might want to watch a video of someone rebuilding or assembling a Porsche motor to get an idea. For me, having owned both Japanese and German cars I get the impression that the former is designed to be simpler and more durable with less parts on the whole if possible whereas the latter is usually much more complex with less focus on cost to maintain/repair as a simple way to put it.

[@kayc9222]

Thanks guys

[@aidenmcclendon5457]

This is a loaded question that can go many different ways. Subarus are a "common" people car. Yes including the WRX and STI. The Porsche is not. Porsche is a much more performance oriented car, off the factory line that is. But look up Andy Forest's 7 second WRX. 1200hp I believe. I don't think anyone really takes a Porsche boxer motor and turns it into that. Both are good. If I could have a 911 RS3 I'd be in love. But Subaru and Porsche are two very different companies.

[@babordtribord]

Nice, do you rebuild only boxer engine ?

[@williamhall2386]

Why/how would this be done without torque plates? Isn’t part of the reason this needs to be done is because the mainline distorts at higher than OEM torque? Will this block run OEM torque? Genuinely just curious, certainly not questioning your methods

[@HondaWagovan]

Wera tools, I use that same hex tool set.

[@samsonian]

Nathan Pang I love Wera. As an American electrician I am rather embarrassed at the combination of higher cost and lower quality of Klein tools in comparison (especially screwdrivers, my favorite being the insulated interchangeable shaft sets as they last very long and are WAY cheaper than anything Klein sells). Wera and Knipex FTW!

[@HondaWagovan]

@@samsonian I mainly do my own work on my car, have bought many socket sets, thrown away just as many. Going to get their socket wrench set and joker wrenches when I resume my regular hours. I got tired of chewing up hex wrenches and keys so I got this set, super durable. Have their microkraft screw driver set, way better then the ifixit kit I was using before.

[@alexk.8715]

Hallo Andi, welches Öl würdest du für einen serienmäßigen JDM EJ207 empfehlen? Danke und Gruß!

[@martin09091989]

2:27 Weis jemand was das für eine Werkzeugaufnahme ist? Sieht aus wie ein Hohlschaftkegel mit speziellen Mittnehmern.

[@hahaha12345678993]

this is an art form

[@ejot2]

Can you explain what you did and why?

[@rlew12]

He machined the #5 bearing surface to accept a thrust bearing on the one half (other was done already) and machined the wrist pin access holes in the side of the sleeves

[@ejot2]

@@rlew12 why only 1 side had thrust bearing and another didn't?

[@colincolin1352]

These engines have the thrust in #3 position. New Age blocks/ cranks have thrust in #5 so you have to convert if you want to use later model cranks. KING bearings Also make oversize main bearings for when you cut the tunnel but only for thrust pos #5 series.

[@tedbaer7133]

Fast schon wie ein Krimi! Hatte die ganze Zeit Kollisions-Ängste

[@nikitapoklonov2349]

Как же отверстие между 2 и 4, 1 и 3 цилиндром? Оно играет важную роль.

[@colincolin1352]

Wish someone could do this Australia.

[@Александр86-у9д]

1.05 гаечный ключ на 17 -какой бренд?

[@user-fw1go1qm5x]

1:08 these clamps spoil the surface of the table, they themselves must be leveled necessarily!

[@flaviofernandes2712]

Conteúdo de alta qualidade, muito bom!!!

[@00clamp00]

BT30のホルダーにBIGのカイザーボーリングヘッド 芯ブレも少なく軽く回りそう 重切削には向かないけど

[@JlerchTampa]

08:15 "Please do not try to do a tool change or anything stupid when I press start!" :-)

[@iansyme3535]

What exactly have you done to the piston pin holes and why? Not exactly clear Andi........

[@georgevandertogt2400]

Ian Syme there were no holes in the new darton sleeves.

[@iansyme3535]

@@georgevandertogt2400 thanks for that! All is now clear.

[@doriasnc971]

Che motore opera d arte ti vogli bene SUBARU

[@TheR4MP]

Puh enge Kiste! Da braucht man Geduld ^^

[@tom98prehn]

Viel glück mit dem lambomotor :)

[@TickyTack23]

4:32 *holds breath*

[@Tsripper69]

Die Rotring vom Hoffmann sind ja eigentlich fürs Hartfräsen ;)

[@k3vin926]

🤩🤩

[@evgenyr1334]

Is this a real life?

[@rlew12]

It's great to see the work you're doing! Would you be interested in doing a collaboration of some kind? I have some free time due to quarantine here in the US and would love to help you out doing some CAD/CAM work if you could use it. Currently building a de-stroked EJ25 w/ CNC chambered ej207 heads, relocated cam position sensors and a twin scroll turbo :-)

[@beachboardfan9544]

God that looked like a pain in the ass!

[@TonyPifer]

I wish to be your apprentice 😬

[@GHEORGHE-IORDACHE]

Big like!

[@xdarksidelpx5962]

Wer kommt von arlows?

[@steffenb_aus_md217]

Da wirst in nächster Zeit öfter arlows Philipp oder limo hören lol

[@tt-rs1457]

Wie meinst du das ? Wer hier bei Arlows arbeitet ?

[@steffenb_aus_md217]

Ich denke er meinte wer jetzt hier aufgrund von Phillip sich die Videos anguckt

[@tt-rs1457]

@@steffenb_aus_md217 Dann sollte er nochmals die 2-3. Klasse besuchen...ist ja pewinlich, wenn Ausländer das lesen......

[@aaroniron2912]

Is this more accurate than the other KZbin video showing a different way to do that conversion? he mentions a "datum", wtf is that?

[@tjlovesrachel]

Aaron Iron datum line is a reference line...

[@olegizmaylovo6554]

Где русские субтитры!!??

[@bigeggroll]

First boyyyy!

[@bigeggroll]

Sorry, that was immature of me... I'm just a big fan of this channel... Sidenote: I wish I had a CNC machine 😔

[@ovalwingnut]

❤ The check is in the mail! 🤗

[@Mj-U]

Der werkzeugwechselr ist aber auch mutig, einmal lange Werkzeuge drinn und schon hast du sie nicht mehr 😬 da gefallen mir andere fräsen deutlich besser

[@vm9684]

I like your channel, but when you post videos like this with no commentary, its boring. You gotta explain what you are doing. Looking forward to your next video. Be safe out there.

[@subarist75]

Уважаю.

[@hermannott7743]

jetzt die alseitz gehasste frage WAS KOSTET DAS ?

[@Behind_The_Slice]

schick ihm ne email, wenn du ernsthaft interesse hast, oder für eine grobe schätzung über facebook.

[@firma_RD]

Ебать- колотить.

[@barrybritcher]

lol high end workshop, LIDL glass cleaner

[@danielhempel9923]

Interessantes Video, leider 4x Werbung🤨

[@JayJay-ng3cy]

Werbung bei KZbin? Kennt mein Adblocker nicht...

[@hermann8434]

Limo 2.0

[@45triza]

First🤔✔️