How to Spray Paint Cabinets (Part 1)

[@MURRAYPAINTINGDelmar]

I've been painting for 34 years, and I must say the job you guys are doing is very professional top-notch

[@ericainsworth8766]

This is how the pros do it. Great job explaining how to properly prep and paint kitchen cabinets.

[@okeefepainting1023]

Thanks Eric

[@salgadoc26]

This is pro. Real pro. Not just amateur thanks

[@JamesSmith-je8sw]

Probably the best how to video on how to paint cabinets I don’t know where this was when I painted my first set of cabinets! Nice

[@Knute1232001]

I just want to say thank you for these videos. As a painting business owner you inspire me to imitate you on how to be a good leader. Keep up the good work.

[@okeefepainting1023]

Thank you Knute. I cant think of a better compliment!

[@MHow-qc3ns]

WOW! I know preparation is 90% of a painting job. However, i had no idea it was this complicated. Now I know why spray painting a kitchen was a time-saver but a wallet buster. Well worth every penny if done right. You fellas have all the angles covered. BRAVO.

[@SnickasBah]

I learned a ton and I've been painting for 35 years. Thanks brother.

[@dejangvozdenov5980]

Good job!💪One of the best video on KZbin about painting kitchen cabinets!I cant wait and I hope you'll post next part soon!🙂

[@okeefepainting1023]

Thank you so much! Im hoping to have something uploaded in the next few weeks..

[@Mowers11]

Really great job. Such pros. 6 year painter to do some cabinet jobs. Have you use Sherwin? Williams Gallary paint. Otherwise I might use Benjamin Moore advance. Any experience with Advance.

[@jktrading6528]

I can't find part 2

[@alexhendrixxx]

Basically said go f**k yourselves lol

[@cashcoinscashcoins2961]

Awesome video and great tips. I’m definitely going to try these products

[@solangeherault7038]

Thanks for sharing very helpful

[@rayjackson4547]

Nice job. Great prep work.

[@splinefusion6986]

Incredible insight. Thank you for sharing.

[@RollingStoneZzzzz]

What is the yellow tape? Specific for wood floors?

[@JessieGuttierrez]

About to do a big house rustic removal going white on all trim cabinets Tks for all the tips

[@farukatasever2933]

Bravo.Excellent tutoring and execution.👏🎖

[@tyler829]

Awesome Video

[@jacoblaffoon6485]

great vid; appreciate ya'll

[@lonlonf]

Great job. What type and brand of primer and paint you used?

[@daveanderson4406]

couple things, how would you back roll slant raise on cabinet doors? instead of bondo on scratches and non deep imperfections use Icing same concept as bondo but drys faster and sticks better and feathers out better, also look into a kremlin spray system its what a pro finishing shop would use, much finer finish. thanks

[@okeefepainting1023]

For raised panel cabinet doors we use the butt end of the roller, works great. Ill have to try out the icing, we've tried at least 10 fillers for cabinets and we always come back to bondo. As far as the sprayer goes, we love our ed655 and the finish it produces. The kremlin is a great setup but with 4 crews spraying a set of cabinets every week we needed a piece of equipment that's easy to operate and didnt break the bank if someone didnt clean it out correctly. If I was spraying cabinets on my own a kremlin would probably be my choice.

[@el.tacolgando]

What's this icing you speak off. I want to get into painting cabinets

[@craigbooth2295]

32

[@ryanprimicias230]

What’s the hardener do, help it dry faster and more resistant to scratches and dings?

[@jamkpa]

Great job in explaining everything! And what color/shade/finish and brand of white finish coat paint did you use?

[@mikebailey3614]

I am really looking forward to part 2! Are you close to posting it?

[@goboater909]

I can’t find part two of painting kitchen cabinets?

[@marcchantal5016]

How many days did it take to get this job done?

[@P90Puma]

What was going to be the content in part two?

[@goldo1020]

Is that Grip-Rite underlayment just as good as the ram board? Would you recommend one using on an entire home when spraying oil primer on entire interior?

[@okeefepainting1023]

I think its just as good although it doesnt have as much cushion as a ram board. So if you drop a hammer on a wood floor it might show damage with grip rite

[@Dvilla-k3s]

How much do your journeymen painters make in your area

[@25258721]

Do you ever use a fflp tip for primers?

[@Igor-q3f]

are you disconnecting and rolling out the fridge or the home owner? sometimes they live dents in the floor.

[@aearnest]

can you provide your thoughts on the airless 310 vs an HVLP system?

[@Skabanis]

Hvlp is slower finer finish. His rig is actually embarrassing Home Depot special but all the rest of his tools are top shelf…

[@marcieosullivan9957]

I'm going to invest in a paint sprayer. Which one would you all recommend please😊🤔

[@markied2873]

Can I paint the inside if I wanted?

[@RollingStoneZzzzz]

I find it hard to believe that in the process... overspray did not get ANYWHERE you did not want it to be. So cridical! Das 😎 all!

[@garyhawthorne1678]

what kind of paint is that

[@ajsbrushworksllc8348]

What was the setup you mentioned for connecting both sanders? Thanks.

[@okeefepainting1023]

Festool Y adapter amzn.to/3MPANnx

[@carloslazar8423]

Is a tip graco 306?

[@Technogodd]

Great information and explaining the nature of this hard job.How ppl think that is so easy and everyone can do it :)) ohh well. I loved the vacuum attachment that you guys cleaning the over spray dust from plastic sheeting .Whats the model number of that ? i would love to get that. Thank you !

[@okeefepainting1023]

Very hard work as you know! I think this is the attachment you’re referring to: amzn.to/3QpIZO6

[@Technogodd]

Thank you for the information 🙏 I was referring the one you guy's vacuuming the floor. I always have hard time vacuuming overspray from plastic sheeting and rosin paper. Thank you!

[@samscheuer7745]

Do you think you both could have gotten the job done in the same amount of time or maybe even less, by just doing it by hand? I only ask cause I’m a one man show and have done plenty of kitchen cabinets, projects this size and bigger and couldn’t imagine getting all that prepped by myself. And maybe that’s it, not having help. I totally spray faces but do so at my home. How long did this job take you to complete?

[@22chachalaca]

Do you mean by roller/brush?

[@Skabanis]

It will look like trash

[@mibooth1852]

Wheres part 2 ?????????????????????????????

[@geraldpearson6679]

What kind of primer were you using

[@Skabanis]

Bin shellac

[@eezy251able]

So how much did this cost the customer?

[@bardinkurtis]

Would you say sanding after primer is required to help paint stick? Or is sanding after primer to get rid of imperfections? Or would you say both are equally important?

[@okeefepainting1023]

Id say both are equally important but less so for bond. Primer is easier to sand than top coats so better to work into a glass like finish early on.

[@bardinkurtis]

@@okeefepainting1023 I screwed up big time and now I have runs everywhere. Sucks because it started out looking so good. Then literally as I sat there after I was done spraying I could see more and more runs appearing. This is not a easy task.

[@okeefepainting1023]

Hopefully it was your first coat! You’ll get it, just takes practice.

[@bardinkurtis]

@@okeefepainting1023 the sides of the bases were MDF Board. What is your process when prepping for paint when dealing with MDF Board. And do you use a different paint or primer with MDF. I ask because I got a texture after spraying and it was only on the sides of the bases where that crap board was.

[@sophiabibi6672]

My paint is peeling off because my decorator did not prime or sand my oak doors 😢

[@Skabanis]

You probably went for cheapest price

[@dejangvozdenov5980]

When you gonna upload video about painting doors?🙂 Thanks!

[@okeefepainting1023]

Within the next 30 days hopefully..

[@chrisrobbins1488]

Awesome

[@mesopomesopo4085]

Where is part 2 in the description? 😡

[@chibai.chamichami281]

Great

[@age_of_reason]

1:00:00 Hun?? Bin "IS" oil primer.

[@BH-hy6ow]

No it’s not. Go do some research

[@213BRANDONP]

I think id prefer to remove the microwave it would be quite a bit faster just 2 screws going down from cabinets above

[@bardinkurtis]

What tip and how much pressure would you say?

[@ajsbrushworksllc8348]

What is inner tape?

[@okeefepainting1023]

Intertape. IPG tape. Just a brand.. but it’s been hard to get ahold of lately

[@ajsbrushworksllc8348]

@@okeefepainting1023 ah. Similar to scotch 2020 masking. I presume. Thanks!

[@alphaviews4639]

very nice

[@thegoodchad3578]

I wouldn’t paint those cabinets but great video.

[@kr5289]

Seems like to me I would rather sand before taping

[@paulsharkey6673]

306 HOLY SHIT!

[@amohtash]

Where is the part 2? KZbinrs always say look in the description for the link but the description is only for selling products... disliked you video just for that...

[@Christhecarpenter345]

Unfortunate that your video never shows the quality of the work you did. You should do some nice close ups next time, in good light

[@doomslayerforever2858]

not even the delivery guys use lifts lol

[@sirtrollsallotthe2nd126]

A pro would have used a conventional system , not a airles sprayer . a pro wouldn't have the airles sprayer in the same room that he's spraying in. a pro wouldn't use plastic to mask the cabinet's as any additional coats of paint will cause the dried paint to flake off the plastic and land on the wet paint because of the lack of pressure controle frome using a airles.

[@Skabanis]

The plastic since the 3m white doesn’t flake the machine in the room with so much air flow he won’t have any dust…the diaphragm pump is fine I run a AAA but this isn’t a high end cabinet

[@braindrain329]

Thanks for sharing this video! It's like porn for painters!

[@MsDanie-wo5tw]

I detest Prager U Content wondering how it’s even in my feed anyway I never troll Praeger U and yes I sod,king itvwrong bc I don’t care enough to check on the correct spelling of allow auto correct to suggest one. That seems overly validating, which this comment is not.i did watch the whole thing though without cringing . These are real people sharing their experience they aren’t telling anyone what to do with one’s own body but sharing how in retrospect with more information perhaps a different path may have been made, one that is still possible, if other people just stop being so negative and maybe the trend to use medical intervention to arrive at the authentic self when looked at more critically just seems to operate like any other business without just allowing that human being being to realize they, or he or she is already a perfect creature the ugliness is coming from anyone who can’t see that universal truth. Never let people tell you who u are or what is or isn’t possible in your life These people may call themselves Christians or Social Justice Warriors, or any thing in between but they don’t know the limitless power of the love of a Christ who instructed his disciples to spread the GOOD NEWS he never told any one to spread hate, fear, or of terrible suffering for life eternal if one does not follow the Way the truth and the life. “All things are possible for one ( Human individual)/who believes in Him ( the impossible ) To me God is the universe his son the light of our world really is a celestial being pure energy The Sun🌞 This light shines in each of us equally but some people spend their lives throwing shade on anyone who is the easy target they can’t let everyone shine equally we must all be accountable for or actions as we are almost all guilty of thi in some way even by staying silent when people are having opinions on things that are personal to someone else and none of our business. The whole issue of gender identity be protected under HIPAA laws and not up for public discussion period. The decisions made by these individuals don’t need public approval or that the details need to be available when asked. Just because it’s confusing to people doesn’t mean allowing this ridiculous access to your journey will result in a shift in views and end stigmatization and othering. And please Pragr U take me off ur list get off ads with ur time robbing presentations, not unlike this now if you ‘re still reading this WHY THIS IS TIME YOU CAN NEVER GET BACK Never 🙈

[@jeffspinner7509]

I thought this was about painting not an appliance moving video

[@georgegreb3087]

That's part of the job,I think they're very thorough explaining things and glad it was included in the video

[@thegreat1548]

@jeffspinner7509 🤡

[@lookingback5889]

@jeffspinner7509 Totally rude and unneeded comment 😡 The guy is simply explaining the prepping process beginning with the proper way to remove appliances, which I myself had no clue. You might consider saying nothing if you have nothing nice to say

[@jodibridges570]

Duh…. Moving the appliance IS part of the process of painting the cabinets.