HOW TO: SST RETEACH TEACH IN (Trying to fix my EVO X SST GEARBOX)

[@rowanlewisuk]

Check out my new video showing how to flash the sst firmware 👍

[@bonlamicq]

Coul you share the video link here... thanks

[@jamiewalker8772]

Hey man. Long time but I’m trying to find the video where you pulled a 7.5 fuse to re set one of the sensor warning lights (gearbox service required- it’s absolutely not required) but it’s doing my fkn nut in 😅 (Disconnect battery did not work)

[@sad_wrangler8515]

Most helpful videos about the Lancer. I got my Ralliart in really great maintained condition, and hopefully, the dual-clutch is not going to be problematic, especially because the last owner had 3 transmission oil changes in 80k. Basically, they also changed the oil every 7000 km. I changed all the fluids, and there was zero metal on the magnetic drain plug. It looked really good.

[@motuc_fan_vic]

Finally I know what a SST teach in is? Very interesting video Sir

[@rowanlewisuk]

Thanks for your comment and the reteach saved me a rebuild on this occasion 😊

[@cyprianskiba8768]

I’ve had my 2008 MR since day one. I was relieved to watch this video on how the software was used and fix your SST issues. I would be interested in getting this software and doing a re-teach myself. Currently, only issue I have on my SST is occasionaly when I start the car, the transmission will go into some gear and grind. Doesn’t sound good. I would love to fix this issue. I have 138,000 miles.

[@andrescordero31]

Same here. Nobody knew how to explained it to me.

[@Sparkplugsteve]

Great result. I actually watched it all and wasn't bored. Definatly pays to be a nerd. 🤣

[@nathanlewisuk]

Amazing not everyone can do computer diagnostics very good work

[@sbn1979]

Need to do a video of software setup and firmware flashing 👍

[@McRDR]

Bro I said u should have got a manual gearbox from day 1 lol... but I love you and Steve and what you do

[@rowanlewisuk]

Thanks for commenting. I know you did I'm my own worst enemy. It was an easy fix though. Well not easy but cheap 😂

[@borisbenchev7193]

Hey Rowan.. What are the files required to perform the Teach In via software? I have a 2009 Ralliart

[@daijones391]

Well done iam happy that its working ok again 👍👍👍👍👍

[@brettroberts1073]

Hey Dude, great video. Where did you get your tactrix kit from? have you got a link?

[@evolicious-x]

Stmtuned sells them or just google search tactrix 2.0

[@ashleyhowitt6158]

Can we have links to what and where to find the software that you have used please, thanks for your video inspired me to give rebuilding the gearbox a go.

[@jamiewalker8772]

Oh you gonna regret that 😅 Good luck on that quest. Strongly recommend buying the Dodson performance fork upgrade. Cheap at thrice the price ✌️

[@jeffpp]

Best explanation ! Thanks

[@skorpion111189]

Awesome video man

[@riteshroheetnand3138]

Hey bro. I've watched your video and it's amazing. My evo x mr having the same issues. It's throwing p0702 and p2809 error codes relating to transmission. Is there a way we can get it resolved by the process which you have showed? I'm from Seattle usa

[@Michael-it7nx]

👍👍👍

[@PaulinhoThompson]

Very interesting stuff, good information for Evo owners.

[@sebastianrogalski3730]

Hello, I have a problem with the 2013 ralliart lancer, I will get an error P0702 gears are lost when I switch N if it switches quickly to D or R, that's ok

[@nathanlewisuk]

You’re not a nerd you’re a computer wizard and remember you did spend years in college doing computers and passed. I know you’re very talented and have high qualifications in computers . Remember the companies that wanted you to work with them.and you said no . Remember you’re very qualified to do this 😁

[@rowanlewisuk]

Thanks thats a nice comment 😁 it paid off going to college now my evo works lol

[@majidmumin]

Hi, am in need of help to do reteach on my JDM Evo 10, serviced the transmission oil filter etc, and I have exact same problem as you gear 5 blocking, and when out to reverse just R blinks,

[@angelarevalo5707]

Can you please add the links to download the softwares please and is there anyway I can get the notes you had for the steps this is such a great video I’m going to do this with my evo (:

[@mrkieronbiggs]

Impressive stuff!

[@rowanlewisuk]

I didn't expect to see you here 😁. Are you commenting about my close relationship with my car?

[@mrkieronbiggs]

​@@rowanlewisuk Nah, the nerdiness! I've spent many a night learning useless information about niche software to solve a problem that practically nobody else has ever had. Gotta respect a like-minded approach :)

[@orbenswazo3361]

Where can I download the software you need to reteach sir?please specify which one to download.thank you so much for this video.

[@rowanlewisuk]

Its called passthrucan and its available online if you search for it

[@jean123jf4]

Hey man, can you tell me if this cable works for programing keys to the ignition and alarm system?

[@dillonperron6536]

hey man, i’m looking for some advice/answers regarding my 2008 SST. i’m having some transmission problems specifically when building boost and letting off throttle abruptly which results with the dash lighting up with “SERVICE TRANSMISSION” and “SERVICE ASC” followed by the engine light as well as traction control being disabled until i turn off the car, all lights go off except engine light once i start the car again but the code usually lasts a day or two. had one time where this happened and clutch slipped HARD AND I MEAN HARD through every gear, problem solved with turning off the car and back on again. i’m looking for any solution you might think of because i figure you know a lot more about the SST than i do, anything helps. i really don’t want to have to get it fully rebuilt $$$ and would rather replace the clutch, but if i have to rebuild it, i have to. thank you very much

[@Mr_George340]

Nice video! Do you know how to install this program? Can you make a video of all the installation process? Or a link... Tks

[@SoFHunterFTW]

I have a problem when my car is in automatic and sometimes when I stop and try to go it just revs and not move and the transmission service required pops up, Do you think its worth doing a reteach for this issue or would it be unrelated?

[@octaviangeorge5455]

My car does get abnormal end on the clutch ventilation. Even after like 20 tries. Any tips? I just changed to oil and tried a teach in after.

[@florenceguiao2679]

Hi I got a question, after reteaching my sst when switch to drive gear mode my car would stall and after switching it to drive gear the rpm goes down if I dont put some acceleration, just like what happened to yours at the end of the video, I got a 2011 lancer ralliart.

[@borisbenchev7193]

Where did you get the sequence from? I believe it's slighty different from the one in PassThruCAN.pdf instructions

[@rvelarde23]

Great video man! I’m having a “transmission service required” pop up on my dashboard I’m not having issues with gears not working but I am getting a “transmission overheat” message when going about 150-km/h any ideas???

[@rowanlewisuk]

Randy Vee try cleaning your sst cooler if it doesn’t improve a reteach and oil change is always recommended. If that doesn’t work then unfortunately it’s a gearbox our job

[@rvelarde23]

Driveway Developments thanks man I’ll probably upgrade my cooler soon instead I did an oil change and filter not too long ago I have yet to do a teach in

[@jamiewalker8772]

Hey man. Loving your videos. Seems we are going through a similar journey although i been through dealerships... 🙄 Did this fix last? I’m really curious cos ima do this in 7 hours lol. All the best to you mate. Keep posting the good work. It’s really helpful to us super busy but hands on skint folk 👍👍👍

[@simonmoran16]

I've got the same warning on my dashboard but I don't have the same problem as what you have. As far as I can tell it drives just fine and selects gears P R N D as it should. But that annoying warning pings up all the time.... would a reteach fix my worries?

[@JacksonStrain]

Hi could you please let me know what you did to get the teach in to work on a non American car that you were saying you had to do. I have tried searching and can't get anywhere

[@rowanlewisuk]

I had to flash the American software, do the reteach then flash back the UK firmware. Although you'd think this flashing of firmware would reset the reteach the values are kept

[@Afnperformance]

do you have working link for passthru can software?

[@RecreationAutomotiveGarage]

When I start doing my car on clutch vent it just stuck there says teach in yes but never ended what could it be wrong

[@andrescordero31]

Mine started acting stupid today. I hope this will fix it.

[@evoxsst]

Well i would be interested in a ''how to'' reflash Firmware on these SST's

[@dillonperron6536]

what does that do???? super curious because i’m having problems with my SST

[@MrShortStuff]

What are your error codes buddy? Have you upgraded shift fork 4 yet?

[@ImportRace]

Nice, good video

[@Hexenmiester]

Have you got the written instructions to share?

[@therealdmarco6366]

To us car guys, that was proper edge of the seat shit waiting for that Yes to appear 😂

[@rowanlewisuk]

My heart sunk when it said abnormal end lol

[@stev4452]

@@rowanlewisuk even i felt that holy shit, my MR went bust yesterday so im on the heartbroke proccess

[@AlfredoMartinez-tv1tx]

Do you need Evo scan to do the re reach ?

[@NickMartelli]

Hi there I’ve got an issue that maybe a reteach can fix? After a reflash I’m getting p181f clutch pressure too high after the car runs for a half hour. It then goes into limp mode. Any ideas?

[@NickMartelli]

I have aftermarket 600hp clutches in

[@rowanlewisuk]

Sounds like you have got incorrect firmware installed. Mine did the same after updating the firmware. Check out my sst flashing video for more info

[@dillonperron6536]

i figure you’d know best, does this reteach fix launch control not working due to “transmission overheating”

[@rowanlewisuk]

Im sure it wont make it worse, incorrect firmware version can cause that issue too

[@abochnip]

can i do it with a VEEPEAK Bluetooth OBDII and a laptop ?

[@rowanlewisuk]

Honaihen Al-hunaihen don’t think so

[@abochnip]

@@rowanlewisuk Sorry for asking too much Do you think the HP tuners adapter will work ? And thanks man for spreading knowledge 👍👌

[@rowanlewisuk]

Honaihen Al-hunaihen as far as im aware literally the only one that will work is a genuine open port 2.0 tactrix cable

[@mellasondoyle5690]

how to do the flash sst firmware

[@MajklMoose]

Hello mate, can reteach help me with my clutch slipping if I floor it ? 56k on these clutch pack

[@rowanlewisuk]

It should help yes cant guarantee it will fix it

[@ashleyhowitt6158]

Need help with this mate please asap

[@shazkhan6383]

Hi there buddy would you be able to do my evo please

[@dennyscortez9741]

Can this be done on an apple laptop anyone?

[@georgewest7406]

Hi , what diagnostic cable you have ?

[@rowanlewisuk]

Its the tactrix openport 2.0. did you watch the video? :D

[@graemehoward4136]

you mentioned tactrix but not openport 2.0. next question, where from? :-)

[@nathanielbanjolewis]

Wow 899 subs literally a week ago u just hit 700....6k for a gear box replaced but really just s laptop needed

[@YouTubeSupportTeams]

boost teach-in scared my dog, hahaha

[@shiz7459]

note u need to pay for almost every software here

[@NickLAnderson]

Hi. 🙂 Please, let us pray together. Dear God who art in heaven, hallow be thy name thy kingdom come thy will be done on earth as it is in heaven, give us this day our daily bread and forgive us our trespasses as we forgive those who trespass against us and lead us not into temptation but deliver us from evil for thine is the kingdom and the power and the glory forever in Jesus Christ's name we pray, amen.

[@wes325isport]

What parrot is that? I've spoken to them and they say they don't do one for the Evo.

[@porschegt2346]

Sst is trash overall