How to still keep your stock T5. With new Transmission Bellhousing, Clutch Master and Slave cyl

[@kurrentevent]

This was STRAIGHT to the point and you wasnt talking non sense💯👏🏿

[@blancaberrios9351]

Looking good, I have Dad watch with me and he was smiling. He said, I know he does a good job!!

[@MIC-LS]

Thank you

[@SkyHighLew]

I have been looking for this exact video because I have that same odd ball 94-95 gm T5 so thank you!!

[@MIC-LS]

You're welcome, I know this is going to help some people like yourself.

[@coloncleanse3542]

Thanks for the info and details on parts. You save me a lot of time and money. LSing a foxbody now can ran that OEM T5.

[@MIC-LS]

Yes sir, keep wrenching!!!.

[@rbrookshgm7907]

Great info, very helpful, I have a 5.3 for my 99 Sonoma this is golden to me

[@MIC-LS]

Glad to have helped.

[@charlescurtis1042]

Thank you for the knowledge bro you just saved me big time

[@MIC-LS]

You're welcome.

[@JoseGarcia-cb5dz]

Exact parts list and parts numbers please

[@MIC-LS]

Ready Bell Housing-- Advance Adapters, @ Amazon part# 712548. Clutch/ Flywheel kit @ Advance Auto Parts MU50185-1SK. HoweRacing.com Hydraulic Slave CYL# 82876 Remote Bleed Kit ( stainless steel braided lines) 8287. Clutch master Cyl 3/4" bore #834.

[@ericsellers9506]

Does this bellhousing account for the tilt the camaros had? T5 mounted at a 30 degree angle

[@MIC-LS]

No, it will not change, the 30 degree angle.

[@noah2530]

Thanks for this video

[@jwtru2life]

Any engine mods? How’s the t5 holding up to the LS engine?

[@MIC-LS]

As long as I baby it, should last me.

[@jwtru2life]

Oh okay, I've wanted to do this for a while. My engine guy tells me the t5 may not stand up to the torque and power of a LS engine

[@MIC-LS]

@jwtru2life trust me the moment I get frisky I'm done for sure.

[@jwtru2life]

You the best. Thanks for the update.

[@azcamaro602]

would this bellhousing work with the fbody t5 transmissions? they sit at an angle

[@MIC-LS]

It will bolt on, if you are using the transmission that belongs with the car. Just like my T5 GMC sonoma/ S10.

[@dirtysouthlogging]

My 04 mustang v6 has a t5 trans can i put a ls to it

[@MIC-LS]

T5 YES.

[@ES4406]

You did a very nice job on this! Thank you for sharing all the video updates!

[@MIC-LS]

Thank you for watching!!!!

[@HarborFreightHarry]

Did the kit come with the bolts?

[@MIC-LS]

Yes it did.

[@gilbertosalazar5720]

this is now 1200 bucks

[@MIC-LS]

Holy shit!!!

[@deviantrebel6326]

Just curious about the stock t5? And the power of the LS. Just wondering how it handles the power

[@MIC-LS]

it will handle it just fine as long as you don't power shift it. The bigger question is I am adding a turbo now.

[@MIC-LS]

Soon after there is a video of me driving the Sonoma. Titled LS Swaped Gmc Sonoma Drive around town with Issues.

[@joshuaortiz6762]

Best video I've found so far, are you using a stock 5.3 starter? Or did you have to get a different one?

[@MIC-LS]

New stock starter for 2000 Silverado 5.3

[@rideout1989]

Will a 91 s10 with 2.5 4 cylinder 5 speed have a t5 in it as shown with 26 spline?

[@MIC-LS]

Count the splines, there is a 10 count and a 26 count.

[@MIC-LS]

Should look like mine not like the muncie set up. The other T5 looks like the bottom were is mounted has long flange mounts in the front. Trust me you would be able to tell the difference just by seeing.

[@scottc4433]

Doing the same swap . How did your t5 hold up to the power ?

[@MIC-LS]

I was able to do a one peg burn out in a future videos while I was testing, I know T5 is a weak link. Now I am adding a VS Racing Turbo 78/75. For sure I will grenade the T5 if I'm not carefull.

[@joseayon4946]

I’m trying to put a t5 behind my ls but mine is a 14 spline do you know which cluch I could use that will fit?

[@MIC-LS]

Check the nv1500 or nv3500 clutch, when you look up a clutch in the description will tell you how many Splines are on it, research, research, research is what I did a lot of.

[@joseayon4946]

Make It Custom ok I’ll check thanks for the reply

[@bruhmomento1319]

Would this work for an s10 as well? I’m pretty sure they have the t5 in them too

[@MIC-LS]

Yes sir it will work.

[@josephchasse2081]

Will this work for a 90 Camaro with a 6.0?

[@MIC-LS]

Yes

[@MIC-LS]

Remember T5 can only withstand about 300 hp and if you do not shift like a madman.

[@The.223-numskull]

Was this the t5 that was behind a 2.2l motor?

[@MIC-LS]

Yes Sir.

[@bigpapatyr0ne732]

Where did you get the hoses and brass adapter?

[@bigpapatyr0ne732]

Would -3an work? I can’t find a -4an.

[@MIC-LS]

Go to HoweRacing.com. I bought the hoses and Hydraulic Throwout Bearing and adapters from them.

[@James-pp2qp]

Part numbers for hoses?

[@MIC-LS]

You can go to Howe Racing Enterprises (HRE) or Summit racing part number is Same for both (HRE 8287 ) should be 2 hoses and a bleeder. Good luck

[@jeremyheaps2053]

Do you have the parts number for the howe throwout bearing that you used on the t5 thanks

[@MIC-LS]

Howe Racing Hydraulic throughout bearing # 82876.

[@jeremyheaps2053]

@@MIC-LS thanks for that I'm working on a s10 that has a t5. I'm putting in a 6.0 ls and want to keep the t5

[@MIC-LS]

@@jeremyheaps2053 It will work, just keep in mind any power shifting will brake the sychros inside. Enjoy it.

[@jeremyheaps2053]

@@MIC-LS is your still running or have you had to rebuild it. I have seen you have done alot of research for the parts that are needed have you every put together the whole part list for everything you have done

[@MIC-LS]

@@jeremyheaps2053 Still Running, check out my other vids on driving the sonoma if you haven't already. I will soon do a video with custom Hood Cowl New electric fan and testing (more driving).

[@blacknotchNJ]

The 1/16th is the correct size for the spacers?

[@MIC-LS]

Technically is in between a 1/16th and 1/8th but I chose to say 1/16th.

[@blacknotchNJ]

@@MIC-LS thank you!

[@blacknotchNJ]

Sorry... the shims behind the throwout bearing, are 1/16th TOTAL?

[@MIC-LS]

@@blacknotchNJ The shims behind the Throwout bearing could add up to 1inch to 1.25 inch, as long as the space in between front of Throwout bearing and the pressure plate is about 1/16th of an inch of space or (gap). My apologies for the confusion but that is what I meant.

[@luisrocha4371]

Can I keep the old master clutch cylinder ?

[@MIC-LS]

Nope, on A T5 the set up is for clutch and fork type. It will not work. On a NV3500 transmission, I am not sure.

[@luisrocha4371]

Thank you man I have a 2000 Chevy s10 and I already got the v8 so I’m just trying to get as much info as I can. I appreciate your videos!

[@luisrocha4371]

So today I finally took out the 4 cylinder out of my 2000 Chevy s10 but my manual trans is different from yours. The housing is a one piece to the trans, it doesn’t come off. Any suggestions ?

[@MIC-LS]

@@luisrocha4371 You my Friend have The NV1500.

[@MIC-LS]

Got some info for you. You have the same trans of this youtuber ( Name BeeterOlds Garage & Budget Builds) KZbin specific to your trans Video title ( LS1 S10 swap Manual Transmission Update) he shows parts and part numbers used for you to be successful with your swap. This is right up your alley. Good luck.

[@ADOLFOSANDOVAL]

What car did you order the clutch kit from? And pilot bushing?

[@MIC-LS]

Hello,!! thank you the vehicle years was a 1999- 2002 camaro Z28 with 26 spline clutch to fit MY T5 trans with 26 spline and pilot bushing came with my aftermarket bellhousing and it fit perfect.

[@doubletapm4]

How's the t5 holding up?

[@MIC-LS]

T5 is holding up fine. It's because I'm NOT thrashing it from a dig. Doing normal shifts. I will upgrade to a better trans soon with this turbo set up.

[@chippi3137]

The original engine was a 2.2?

[@MIC-LS]

Yes sir, a 2.2L.

[@chippi3137]

@@MIC-LS will that transmission actually handle a 5.3 for more then some burnouts and a couple pulls

[@ronnelson7828]

This trans may not last too long with a healthy 5.3, especially if you are doing some "spirited driving"!

[@MIC-LS]

I totally agree, and new bearings were installed on trans once let's see how long this one will last.

[@blacknotchNJ]

What flywheel did you order

[@MIC-LS]

Thank you for the question, watch my video on how to keep your stock T5 the clutch kit part number does come with the Flywheel.

[@jonbrown9641]

K

[@MIC-LS]

Sí.

[@RC-mu7vc]

What flywheel do you use?

[@MIC-LS]

Comes in with the clutch kit, in the video shows part number for the clutch/ flywheel kit all in one.

[@RC-mu7vc]

Thanks

[@MIC-LS]

Kit is out of 1998 Chevy camaro. Flywheel did fit a 2000 Chevy Silverado 5.3L engine.

[@RC-mu7vc]

Sounds good I am doing a s10 T5 with a 1994 camaro Lt1 conversion but the 168 flywheel is getting stuck inside

[@MIC-LS]

You will pull thru, you are watching old vids hopefully next vid from me should be ok for the viewers. Goal is to get my new turbo spinning. To do some burnouts for the people.