How To Straighten Hot Wheels Monster Jam Axle

[@mechanicalmadman1]

I was wondering how to remove those monster truck wheels but have not had time to try . Thanks for the video.

[@pratikbuddhana1740]

cool way of fixing these trucks that works for me: bend the axles int he opposite direction of the bend. pick up the truck, and spin the wheels a bit. The wheels will stop at the lowest position. pull the wheels slightly straight down so the axle is bent straight downwards. then, bend the wheels upward. If the axle turns upward instead of bending upward, try again. At one point, the axle will have bent against the original bend. This is not a perfect fix, but it is great if the purpose of the toy is for play rather than display. This method works for hotwheels cars as well.

[@robgsouth2293]

Great video! I'm trying to customize a grave digger hot wheel for my 12 year old grandson. I could not figure out how to remove the wheels without tearing them up. Thank you for sharing. His truck has ugly grey tires, wondering if anyone has any tips for painting the tires. Thanks again

[@spinmastermonsterjam9344]

I use some pliers to remove the axles and then use a hammer to straighten the bender side

[@eltrucc9091]

I literally perfectly bend it with my hands it works!

[@josemayorquin8109]

Nice that helped me out man

[@davidwilliams1201]

Did you have a problem with the axle turning, flipping on you in the vice? If so how did you get it to stop. I find the axle bend wants to point up or down every time I try straightening it.

[@treygibson7048]

A good set of jaws on the vise helps. You can also use pliers to hold the end.

[@dexterng3104]

Will hotwheel monster truck work , because the Axel is bend.

[@eltrucc9091]

I have that truck

[@dailyseharihari]

Thank you, it's works!

[@trailhiker8063]

Nice!

[@_jjrxrz]

Does this work with other diecast cars?

[@1986heli]

Great

[@coolhood9072]

What if you don’t have one

[@rgjr.6055]

Thanks

[@gamertzx7060]

Are these the same with normal hot wheels?

[@treygibson7048]

No. This only works on monster truck toys.

[@AndreaSmith-pv5wn]

Is this also work for Spin Master truck

[@alexgutierrez6746]

The construction of both Spin Master & Hot Wheels in this regard is basically the same. To soften the plastic, try submerging the toy in boiling water instead of using the soldering iron. This will eliminate any chances of melting plastic parts if touched by the soldering iron. If you are underage, ASK for help from your parents.

[@AndreaSmith-pv5wn]

@@alexgutierrez6746 so they both artist a video to work on Spin Master trucks

[@jessemartinez2840]

Great video

[@coolhood9072]

Cause I already used a hammer