How to strip a bad sublimation tumbler.

[@made.by.markia]

u just saved me a ton of money 😅 thanks for sharing!

[@ReginasCrazyLife]

You are welcome.

[@BentleysWorld0913]

OMG I have watched so many videos trying to fix a messed up tumbler!!! I've been told to put them in an oven and so much more and I've tried it all!!! YOU, baby are the FIRST the ONLY person that has a procedure that actually works 100%!!! THANK YOU!!! THANK YOU!!! I am now a loyal follower of yours!!! No need for me to look anywhere else!!!

[@dcauzzort22]

Sorry might be a dumb question… but after stripping it can you sublimate on it?

[@ashekkam5094]

That’s my question

[@Cricket6907]

Lots of people answered this. Just read the other comments

[@TK-kn9es]

Only if you respray a sublimation spray like Subli-glaze. They have it in white which is what you need. I'm going to experiment with the ones I'll strip down.

[@kerryestevez4433]

Thank you thank you thank you for this! I have 23 tumblers I was ready to donate because I tried everything! I tried to bake the images off with no avail. I plan on selling them as blanks now! Thank you for allowing me to make something rather than nothing!!

[@Montaden3]

Same!! I thought I was doomed!😅

[@SashaMitchell-ct9po]

I have a question. After you spray white can you apply polyacrylic and sublimate on it again?

[@sheilasturgeon]

That is the exact question I have

[@BATTAAH]

@@sheilasturgeon That is what I came here to ask. Can we sublimate on these again? I have the white ones.

[@bernielove49]

this has been the best method thank you so much for sharing you save me from throwing 12 tumblers away your the best 🥰

[@ReginasCrazyLife]

@@bernielove49 you are so welcome

[@billysacharogers1805]

Thank you so much for the best stripping video I’ve come across! I have a bucket full of cups that are about to meet citristrip.

[@shiritacruz2882]

You can also use pure acetone and it comes right off. Even if you mess up epoxy, pure acetone will take it off. You could buy it by the gallons as a nail salon store or a hair store.

[@daniellem7583]

I tried acetone it did not work for me.

[@mommabear76]

I'm trying to find out if this trick or the acetone would work on the white sub or black sub tumblers, too?

[@HORRUS29]

Did it work on the white tumblers?

[@tonie1106]

This method is better than putting them in the oven. Thanks for sharing

[@dianecunningham2223]

I wish I had seen this video, before I tossed out my tumblers. thank you

[@scrapin2010]

Wow I just found your channel I was throwing mine away 😞

[@janetbuchanan8149]

OMG Thank you, just picked through the garbage and took mine out....Can you also do this with coffee mugs?

[@myrawhite9138]

Like others I wish I had seen this before I threw mine out. Does it work in the white tumblers. Thanks so much for your video.

[@staceybaker41]

Citri-strip - "Let's that sublimation fall right on off" HAHA LOVE IT. ❤ 😂

[@jerridyke8067]

Thank you @Regina'sCrazyLife! Terrific video!

[@berthakellough4832]

Thanks Regina - I am new to sublimation and messed up my first tumbler. While searching for ways to removed/repair my tumbler - I am SO happy that I found your video. Ordering the CitrisStrip today . THANK you very kindly - YOu have made my day.

[@lpickletanklRS]

Does the same method apply if the Tumblr is white

[@mgb426]

Hi! I just came across your video and what a great method. I do have a question, because I am new to sublimation.. once you strip off the sublimation you had on, from what I understood, you cannot resublimate these because the coating is now removed, correct? Or am I wrong? I don't do the resin type tumblers. I just wanted to understand the terminologies and to make sure I understand the final product, once its stripped. Going to subscribe to your channel because you have great content. Thank you :D

[@BabsAsante]

Question, please. After the stripping process, can sublimation be re-applied on the tumbler?

[@Neeshia26]

First, thank you. I tried it, and it came out just as you said. Do you have a video of a tumbler you refurbished with permanent vinyl?

[@Gmamas_Southernkitchen]

Thank you thank you thank you. I was just gifted 40 tumblers that have sublimation on them. I was hoping I could strip them. But my question is can I sublimate after stripping and do I need to treat it with anything first?

[@PAndrew002]

Can you sell these once you put the stripper on there?

[@lisaschmitt5813]

Hi - this video is so amazing! Can you remove the sublimation on white tumblers as well? Also can you resublimate the same tumbler after you remove the mistake?

[@trishallen6406]

So if the tumbler was originally white before sublimating a print on them will it strip all that of as well? I'm very new here sorry for the dumb question hahaha. If it does you can't resublimate?

[@janetpatt5945]

Thankyou!! I am glad I found your video, very helpful...

[@christinamarkwell6898]

So how can you re sublimate back onto the tumblers, after u do the paint stripping, because it takes it back to the metal with no white sublimation cover like they were when purchased?

[@alyssaflowers2112]

Does this also strip the white off the sublimation cups? If it does, how can you make it white again to be able to sublimate on it again?

[@pewaboop]

can you redo the sublimation again ????

[@Dallasneedsu]

Does this work the same way in the white tumblers ? I noticed you cleaned a stainless.

[@joanivanhorn9639]

That is an amazing money saver! Thank you so much!!!

[@leanne7832]

Thank you, this worked great. I had some tumblers that I had baked to lighten the design because I had planned to resublimate using a darker design but they didn't lighten up as much as I wanted and a few I had not baked yet. I decided to combined your technique with anoter video I had seen. I've thought about learning to do epoxy but wasn't sure if I can aford adding another craft to my repretoire. I saw another video where the man sanded his tumblers and then used high heat white spray paint and Polygloss to recoat the tumbler lfor sublimation. You can add polygloss directly to the silver tumbler and resublimate as well. Your tutorial saved me the step of sanding and the cost of having to buy an electric sander. For some reason the tumblers that I had baked were harder to strip, I ended up leaving them wrapped overnight. Thanks again.

[@dwillslady69]

Where do you find ploygloss? Is this easy to do?

[@PatriciaGoodwin-u8u]

Hello does this work on the white 20 ounce tumbler???

[@wandahernandez8647]

Hi when I do it to the white tumblers do I need to use anything on it to recondition it so I can re sublimate

[@mrsclausme]

I just threw one in my kitchen trash yesterday after trying to bake off and redo unsuccessfully. Digging it out of my trash today. So very helpful. Thank you!

[@janettagagnon3245]

I left citristrip on for 24 hours and nothing happened.

[@parisharrison6639]

Thank you

[@Ray-xb6uj]

After stripping it. Can I sublimate it again?

[@bucsgang7003]

Once stripped can you re Sublimate ?

[@viviancruthird4543]

Hello Regina, I'm new to your page and want to thank you for this video. It was very informative.🤗

[@ReginasCrazyLife]

You are so welcome

[@lizalonso_]

if it’s a white tumbler originally, will it turn metallic ?

[@tammywilson9130]

so can you sublimation the tumbler again

[@BreeLvee]

Mrs Regina... You Done Helped Me AND Gave Me Some New Ideas!!! Owee You A Godsend! 🙌🏽🙌🏽

[@rosennechan1]

thanks for the info. One question....can i sublimate again on the stripped tumbler?

[@alidadebruyn36]

Will the same method work with ceramic?

[@koakes82]

WOW! I thought they were on good for the garbage after they got ruined. You saved me a ton of money. THANK YOU!

[@brendacameron5246]

I’m a beginner and this was a great idea

[@torifraire1777]

Thank you so much! You’ve saved me tons of money! And I can’t wait to try this in my recent little mess ups!

[@SusieDavis-d9n]

Does this work on the white tumblers?

[@nicolechadwick5912]

If it’s a white tumbler will the white come off as well?

[@SusieDavis-d9n]

Can you reheat them with a new design?

[@JakeJisa]

Can you resublimate these?

[@JuliaJo_]

Can u resublimate the tumbler again?

[@bindabizy7256]

Does the citristrip take off the polymer sublimation coating?

[@ReginasCrazyLife]

Yes

[@powerfulempress1727]

will this work with the white sub tumbler without taking off the white gloss

[@nemesis8184]

muchas gracias , vamos hacer las pruebas

[@nursekeysha310]

This didn’t work for me.

[@geethamaharaj23]

Does it works on the mugs

[@queen7618]

Are you able to re-sublimate?

[@abelmonreal2787]

Does this method work on the white coated tumblers?

[@kellibasey]

You can bake the sub off and resub it if you bake it off. It's videos on youtube that will show you how.

[@CatCraftsGreeneyes]

Thanks for sharing ❤

[@WHITEYESTELA]

Loved your video very explainable. Seeing foward to watch your videos. But how many hours more less. And what are clay and hydro tumblers

[@NinaCristina12a]

I am so glad I came across you. I just tried sublimation for the first time and messed up 10 cups! 😢 this worked amazingly!!! Thank you

[@fyneartistry7121]

Thanks so much for sharing. Just wrapped my last one in foil!!! Can't wait to see the results!!! New subby!

[@alondra-akasquirrell1848]

THIS IDEA JUST SAVED OVER 25 MESSED UP TUMBLERS...OMG!!! THANK YOU!!!!!!!!!

[@Cricket6907]

I don't do sublimation, but I bought a WHOLE CASE of sub tumblr's because it was a style I liked that they didn't offer in regular stainless. I figured I could figure something out how to make them usable for me. I tried your method tonight and this was so easy and took all the sub coating off! Thank you so much

[@phreedom4896]

What type of paint is best if I want to sublimation it over or can I began sublimation without painting it.

[@TK-kn9es]

I'm going to try Subli-glaze white spray. Amazon has it. 29.99

[@elizabethvallely4044]

This is a life saver awesome video, thank you so much for sharing this wonderful tip!!! Liz 😊

[@mommabear76]

I used it on a white sublimation 20oz tumblers. It worked in 2 days instead of a few hours, I guess cause we are way up in the mountain area.. now, after removing all, it basically became a stainless steel tumbler. Did you put the sublimation coating on it to reuse it?? Cause it doesn't sublimation afterward?

[@shantaybrown617]

I am glad i found your video early in my sublimation journey. THANK YOU H-O-N-E-Y....;)

[@melaniesantiago233]

Can I do that on a white one

[@hildahernandez-perez2665]

I can't believe HOW EASY it came out. I saw a video to use pure nail polish remover and it was sooooo strong and sometimes it gave me a hard time. Thank you

[@crisgodinez5876]

are you able to re-sublimate?

[@ThanosTheTitan93]

Will you be able to use that same cup again for sublimation?

[@marshagrant7847]

I'm gonna try this❤❤

[@victoriakelly1542]

OMG, Thank you Regina for sharing, I was sick when I messed up my tumbler and don't know what to do ,I'm subscribing

[@soniamartinez9207]

Can it be used on white sublimation tumblers? Will it take off the sublimation coat?

[@jackiechark6427]

Thank you

[@phreedom4896]

Omy you have saved me so much energy and time and frustration. Thank you Thank you

[@fahameshac]

Awesome work ! I will be trying this , I have to get back into glitter tumblers, where did you find your 4 cup tumbler turner? Thanks for your video !

[@cindybentley1551]

Just to let you know. If you are going to cover a sublimation tumbler using epoxy or an epoxy alternative you do not have to strip it.

[@ReginasCrazyLife]

I stripe mine because I did a glitter epoxy tumbler 2 layers of glitter, then epoxy, did a decal and epoxy again.. It looked perfect however when I was at a show a customer picked up one of the tumblers, it was a sunny day in Florida, and she said out loud is there another design under the glitter.. In the sun I could see it.. never again will I get embarrasses at a show.. So I strip then glitter.. I was just sharing my process..,

[@cindybentley1551]

@@ReginasCrazyLife I see! I paint mine first so maybe that’s why…but I understand!

[@Gjyshecreativecreations]

Thank you this was so helpeful

[@joycepugh5347]

Thanks for sharing this- I never throw them out - I just sand them a little than paint them - then do what ever I to the tumbler

[@jeneanwillis9588]

OMG THANK YOU FOR THIS INFORMATION I JUST STARTED AS WELL GOT LIKE 13 OF THEM THANK YOU SO MUCH

[@tiruwork1000]

i love your work it is a great you did wonderful job if you cane i love to contact you but how?

[@ValeriaPompa]

Such a great help, thank you so much! question though can I go back and do a heat press sublimation tumbler?

[@brialo6016]

Once you strip the tumbler, can you then use infusible ink or can you even sublimate again

[@yeelalavi8859]

Question: i use sublimation, and all the materials are white. Does it take off the white as well?

[@deloriswhite1309]

Can you do this with white tumblers as well? Thank you

[@rosiecortinas4725]

Can you etch them after you do this with the citristrip again?

[@cliffart7398]

i messed up a tumbler and decided rather than throw it away I mounted it on my lathe and sanding the white coating off. Now I have a stainless steel tumbler sanding to 800 grit. I can engrave it on my laser but can I sublimate it?

[@ReginasCrazyLife]

No once you strip it you can sublimate it and more.. I do glitter tumblers , wrap them with printable vinyl or dtf transfer

[@ashleypearl2751]

So u did not have to bake it with the stripper on it? Just let it sit for a couple of hours?

[@kirstenkraftfullymejordan]

TFS trying this right now

[@sharnon28]

Can u do this with a white tumbler ?

[@keyshots4u2]

Will this only work on the stainless steel tumblers or will it work on the white sublimation. Tumblers as well. 😊

[@ReginasCrazyLife]

The tumblers that I strip are the white sublimation tumblers I mess up on… They strip down to stainless steel

[@shaw394483]

If it strips all the way down to steel, how can I get it back white to sublimation me back on it?

[@ReginasCrazyLife]

@@shaw394483 you can’t it will become a stainless steel tumbler to epoxy or do vinyl rap

[@jerritanner275]

This is great! Thank you. Does the tumbler have any scratches or dullness from the process?

[@sharonmaldonado8160]

That is a great idea I’m going to get that stuff today. Thanks 👍🏼

[@nemesis8184]

muchas gracias funciono genial , a recuperar muchos jijiji

[@dejanillshearer2677]

Thanks for this video you saved me money and my cabinet from being taken over by all my mistakes....❤

[@BobbieBTexas]

Awesome thank you

[@JenLapent]

Can you do this with the ones that are white for sublimination?

[@ItsMarieD]

love this moreso than using a convection oven that doesn't get it all! Thanks for sharing!!