You CAN Fix your sublimation mistakes with a heat gun!!

Using a heat gun to lighten the image on a sub tumbler so it can be sublimated again.
Use my links below if you need any materials I used in this video.
1800 watt dual temp Heat gun: amzn.to/3DJ9wA0

[@made.by.markia]

Aww like father like son 😊 great video thanks for sharing

[@TouchofClassCreations]

Thank you, and thank you for watching!!

[@justelleannrobinson7937]

I know this is nothing to do with the video but can you tell me where you got that printer stand I need that! Thanks for making this video great info!

[@TouchofClassCreations]

It came in a set with a matching desk from big lots a few years ago

[@wendymottas3652]

What temperature in the oven? Do you have to use a convection oven?

[@TouchofClassCreations]

In an oven I would cook at least at 365, in my oven I do at 400 degrees to burn the image off, and I do use a convection oven, usually about 40 min or so. Here is a link to a video I did using oven STOP THROWING AWAY YOUR SUBLIMATED TUMBLER MISTAKES! How to Resublimate a tumbler #reuseoldtumblers kzbin.info/www/bejne/bWfTaaGqrcZ0prc

[@shannonblackman467]

We gotta be friends....I'm a BUCS fan too.... :)

[@TouchofClassCreations]

Heck yeah!! Go Bucs!!! I feel another Super Bowl run this year!!!

[@beckyphillips3008]

Will this work on a license plate as well?

[@TouchofClassCreations]

I have only ever tried it on a tumbler, but I would guess it would work on pretty much any sublimation hard substrate as the gas would cook off at the activated temperature

[@ritaurbina8281]

How close are you holding that gun to tumbler?

[@TouchofClassCreations]

Probably should hold 10-12 inches out, I might have been a little closer😜

[@ritaurbina8281]

Can I use a toaster oven just to bake off?

[@TouchofClassCreations]

I am sure any oven for about 40-45 min at 400 will bake it off, just make sure u don’t cook in oven after, sublimation gasses can be toxic

[@karrensewell3768]

Did you use kiw med or High heat

[@TouchofClassCreations]

Hey there, I used high heat, thanks for watching!!

[@ilovedanecook62]

I have a heat gun but it's not very strong what is the minimum wattage for a heat gun

[@TouchofClassCreations]

I am not sure the minimum wattage on heat guns, I am by no means an expert, I would say it’s got to be able to heat up to at least sublimation temp, so at least 365, I would say any of the 1600 or 1800 watt ones they sell on Amazon would work

[@ilovedanecook62]

@@TouchofClassCreations ok thanks mines probably not that strong.

[@alicedonaldson4065]

What oven do you use?

[@TouchofClassCreations]

I use the galaxy lopo tumbler press

[@ritaurbina8281]

Can I do this to a mug too??

[@TouchofClassCreations]

Yes, this will also work for sublimation mugs

[@karrensewell3768]

And how far from the cup

[@TouchofClassCreations]

As u can see in the video I held it pretty close, maybe an inch or 2 away

[@annperz4132]

Was there a lot of fumes?

[@TouchofClassCreations]

It wasn’t too bad, although I still think cooking the image off in an oven is the easiest if u have a little oven or tumbler press available. If u are sensitive to fumes I would wear a mask or do in a well ventilated area still

[@TheBestUni]

🙋🏾‍♀️🙋🏾‍♀️

[@TouchofClassCreations]

🙋🏻‍♂️🙋🏻‍♂️💪 hey friend!! thanks for the share!!!

[@TheBestUni]

@@TouchofClassCreations 🤜🏾🤛🏼❤️

[@Thecraftinggirlboutique]

It would need to be way lighter

[@Graeme758]

Just jump to 3.00 if you want to miss all the pointless waffle about ovens and where to buy a heat gun. Three minutes before he actually does anything useful. Oh, and save some time, skip to the end, it doesn't work.

[@TouchofClassCreations]

The process does work, albeit not as good as cooking images off in an oven, however no method will completely burn a sublimated image off ( that I have found at least) and the pointless waffle is on all my videos, (so if u don’t like to hear me talk u should skip my videos entirely)I like to just aimlessly talk to those that will listen… lol!! 😂 thanks for watching and for your feedback!!