How to Swage Oval Sleeve HSC-350, 600, 600BB

ARM Sangyo co.,ltd
HSC-350 HSC-600 HSC-600BB
How to Swage Oval Sleeve.

[@jimjim6089]

Nice demo. I'm doing it with 3/16" cable and having a LOT more trouble than you getting the cable to go into the ferrule.

[@marinomorales9440]

buenos dias donde se puede comprar ?

[@user-eb7ph5sg7r]

Could you tell me what country are you located？　Then we can surely answer you the question.　from ARM Sangyo Co.,Ltd.

[@mehmeteminercan]

Fiyatı ne kadar nasıl temin edebiliriz

[@bofe1709]

Can 7x1 wire ropes use an aluminum sleeve/ferrule? or will it slip away under tension? i´ve been having this problem. Thanks!!!

[@arm3gyoinfo]

Dear Gustabo-san I am not sure if you can surely use 7x1 wire ropes with our swagers and sleeves. Because we have not tested such wires. For the wire rope 7x7, and other standard ones, when you use ARM Brand swagers and ARM Oval sleeves properly, wire ropes will not be slipped off from the sleeve. Under the pulling test, all swaged ropes are broken before being slipped off. from ARM Sangyo Co.,Ltd Yukio Kawamata

[@mollymutant]

How does swaging hold up under mechanical testing? Say in comparison to the original strength of the wire rope?

[@shopbrat]

Mary Brumbaugh If done correctly, should be 90% strength of cable.