How to take off the grille from GMC Sierra 1500 by M&R Automotive 2019 2020 2021 2022 2023

⚒️HOW TO? With Mike from M&R Automotive➡️ Remove the grille from 2019 2020 2021 2022 2023 GMC Sierra 1500
www.MandRonlin...
✌️While the grille was off, we went ahead and installed M&R (1) and (2) 40in light bars. We've got a white and an amber set up.
M&R light bars are uniquely designed to be super slim. This allows Mike to design brackets to fit the light bars behind the grille.
🔦Light output ➡️ • 2019 2020 2021 2022 20...
👌How to install the light bars? ➡️ • 2019 2020 2021 2022 20...
40in LIGHT BAR SPECS
🔆 WHITE 🔆
LEDs: 36pcs x 5W
Power: 180 watt
Luminous flux: 15,000 Lumens
🔆 AMBER 🔆
LEDs: 36pcs x 3W
Power: 108watt
Luminous flux: 7,000 Lumens
👋All M&R Automotive light kits are for off road use only. Please enjoy them responsibility.

[@jimfisher2387]

Great video. No B.S. and right to the point. It was very helpful. Thank you

[@MandRautomotive]

Glad it helped

[@loganmarks2490]

Can’t say how much I appreciate this video

[@MandRautomotive]

Thats awesome to hear. I'm glad it was helpful.

[@josecortez8842]

What a efective Pry hand's !! Great video !

[@Ryan-mn6on]

The 2023 has a slightly redesigned fascia. There are now white plastic pegs on the side in addition to the d shaped tabs and where the fascia goes into the headlight there are different connectors there now as well.

[@Scythe7777]

Thank you!!

[@user-ng1iu5nq7b]

Good job!

[@MandRautomotive]

Appreciate it

[@jovanygarcia7584]

Best video tutorial for sierra grill thank you sir!

[@MandRautomotive]

I appreciate it

[@user-of6ps1em6q]

This video teally helped thanks mlke

[@MandRautomotive]

Happy to help. Appreciate the comment

[@JP-ei1hi]

I have a problem with this video. I just took off an upper bumper cover like he shows. Mine was a 2022 Sierra. You cannot get to the tabs from below like he states. To release them, you very carefully have to put a small flat blade between the upper and the lower edge of the grille and push the tabs down to release them. It looks to me as if all of the release tabs on his cover are gone. It seems that GMC has gone above and beyond to make this as difficult as possible.

[@MandRautomotive]

Agreed

[@elNitemare]

Hey bud great video! One question though! Does the bumper only have to come off because of the 3 bolts at the bottom of the grill?

[@MandRautomotive]

yes, sir. In order to get to them, you need to unclip the bottom partition

[@user-of6zj4bt3q]

I'm about to do a grille change on my '21 Sierra SLT. I'm a decent DIY'er. 1-10 scale of difficulty with 10 being a the toughest, how would you rate this project? Great video!

[@MandRautomotive]

I think its fairly straight forward with mostly clips. Difficulty about a 5/10 for me. Let me know how it goes

[@2134tracie]

@@MandRautomotive I did the grille swap and it turned out awesome. Your video was truly a step by step tutorial. Thanks again and keep the videos coming!!!

[@MandRautomotive]

That's awesome to hear. Glad it was a fun and easy project to do.@@2134tracie

[@youtubewatch5886]

Does the inner and outer surrounding part of the grille separate from each other?

[@MandRautomotive]

Hi. I'm not really sure what you mean by inner and outer part.

[@youtubewatch5886]

By the outer surrounding part I mean the part of the grill that is painted to match the truck paint, can that be separated from the rest of the grille? Thanks for your reply

[@1776_Apparel]

@@youtubewatch5886 have you figured that out? I know they have the overlays so I’m assuming it does. I’m looking to change mine to a mesh grille so I’m wondering the same thing

[@youtubewatch5886]

@@1776_Apparel yeah the oem grills separate from each other but aftermarket ones don’t and that’s what I don’t like about the aftermarket ones.

[@user-of6zj4bt3q]

@@youtubewatch5886 so to separate the surround from the actual grille on the oem one, would you still have to basically do these same steps to separate them or is there an easier way since all you wanna do is remove the surround?

[@XxMissingDataxX]

No camra ?

[@user-uc9px1iu2m]

It must be fun putting those 4 screws back in, inside the fender. I want to paint my grill surround, but think I’ll just tape everything well! I’m quite comfortable as a DIYer, but those clips are a pain

[@MandRautomotive]

It’s not that bad :)