How To TAPE and MUD Your DRYWALL! PRO Tips for Beginners!!

[@StudPack]

Use code "XSENSE10" for 10% off Buy on Amazon: amzn.to/3Z4lFum Official Store: www.x-sense.com/SC07-WX

[@BenjaminLevy7]

In Massachusetts, combo alarms are required to have voice alerts that distinguish between smoke and CO (Nicole's Law). The one demonstrated in the video just has beeps, but it looks like X-Sense also makes combo units with voice.

[@Growlerinthebush]

Just bought one on the strength of this video with an extra Carbon Monoxide sensor for the small bedroom where the Combi Boiler is.👍 Update: These are really easy to set up and the good thing is that we can get them from Amazon in the UK. I just wish we could change the voices on these things like on SatNavs 😂😂

[@briren96]

the promo code entered and says cannot be aplied to your purchase. What gives? Apperently it won't work on the 3 pack...

[@NuclearPrime360]

Looks like a great product. Just remember, there are two main types of smoke detectors. Photoelectric detectors like these work kind of like your garage door beam. When the smoke blocks the light beam, the detector goes off. These are faster at detecting fires that smolder. The other type is an ionization detector. The concept is the same, but instead of light it uses a small amount of a naturally radioactive element (commonly americium) and a simple radiation detector. The radiation is so weak that it gets absorbed or shielded by the smoke particles, triggering the alarm. These are typically more responsive to flaming type fires. Plan your installation based on the most likely source of fire. I use photo sensing detectors in areas like bedrooms where a cigarette or faulty electronic is the likely source, and ionization detectors near the kitchen to detect an oven fire. Also, garages don’t typically get detectors since they aren’t required by code, but I saw a house burn down from a garage fire two weeks ago! Use an ionization detector there to minimize the chances that exhaust set it off. You can also get some nice CO detectors that will open your garage door if your remote starts your car with the door closed.

[@EricBible87]

Paul is so comfortable in front of the camera. Compared to the first videos you guys did he is so much more relaxed and the words just flow for him. I know he has bloopers and not always 100% perfect but his explanation of things makes it so simple to understand. I don’t even do this kind of work, I just love watching the videos and learning.

[@brianhopkins5251]

The bloopers, mistakes and adjustments are what make him (and this channel) so great. Real life, real people.

[@craigieb]

I came here to say exactly everything @EricBible87 did. I have no reason to watch any of these videos, yet I never miss a single one. Paul and everyone in his family are national treasures!

[@littlsuprstr]

His outro was fantastic.

[@nickp3173]

Your dad, the main man and squeeze, Paul, was absolutely built for this youtube thing. The best part about it is not only does he deserve it, but he has fun doing it all.

[@Lyons-rowR]

Rad, Summer and Jordan you guys are so lucky to have a POPS like Paul. You know you’re getting quality craftsmanship and he ain’t gunna walk off the job with your money!

[@daxmas625]

AMEN!!! Proud of his work and wants to be a true craftsman

[@sniperfi4532]

Not only that but if he makes a mistake he points it out and shows how you can rectify it and prevent it from happening again.

[@travisk5589]

@@daxmas625 Wants to be?

[@IAm-cs5bo]

100%

[@jimeneazy5999]

The older I get, the cooler your dad becomes! Love the attention to detail. It ain't about getting it done quick and getting paid, it's about loving what you do and perfecting your signature. There's a time and place for production style work but if quality is what you're after, step aside and let the true craftsmen do their job.

[@coburn_karma]

Paul is the father we all want.

[@airmar27]

when in Jordans house , no skipping steps, now sisters house he asks if dad has to do all steps lol

[@weekendhomeprojects]

Haha nice catch.

[@margaretbear]

"What are you skimping on Jordan?" 😂🥰 I didn't think it was possible to be even more impressed with you Paul but my goodness. Your attention to detail... behind cabinets no less! You are such an amazing person. And taping and mudding with so much care even after doing it for what must be 30 years. Hats off to you sir.

[@alberthartl8885]

I did this for 33 years in California where they have earthquakes. I always pre filled the joints with 20 minute joint compound. Then we applied fiberglass tape and a coat of 20 or 40 minute joint compound to lock the tape in place. We could come back in a hour to apply a second coat using premix. The next day we applied a third coat if needed. Had very few cracks open up, even after an earthquake.

[@gf8958-p7p]

This might be why I called this method called the California method. 😊 Glad you guys know how to build for earthquakes. Too much beauty in Cali to lose!

[@cooperw22]

I do the same method, in my renovation company. Works like charm and give me peace of mind.

[@phylliscage]

I’ve never seen anybody who is as precise as you. Love watching you work. Excellent!

[@JV-pu8kx]

8:02 From a firefighter: carbon monoxide is heavier than air. You will already have succumbed to its effects by the time there is enough in the room to reach, and trigger, any CO detectors on the ceiling. Mount them low on a wall. They make plug-in units for this reason. Smoke detectors, however, _do_ need to be mounted on the ceiling.

[@HerbieBancock]

Inspectors don't give a shit about physics. They just check boxes.

[@1packatak]

People need to have their furnaces checked regularly. I learned the hard way when my Mom was complaining of headaches. She had migraines so we thought that’s what they were. When it was several days, I suggested she have her furnace checked. After all it was December in WI. When the company asked if she was having problems, she mentioned I was concerned about her headaches and CO. They told her to get out of the house immediately, and had a tech there in 10 min. The tech was shocked at the levels of CO. She spent the night at my Aunt’s house. And the company had a new furnace installed and ready to go by the next afternoon.

[@moonpiespotlight4759]

I went back and watching some of the 1st videos. Paul has become a real TV host. You guys deserve your own TV show.

[@dubfoot1659]

They probably make more money doing this and they have total creative control.

[@briankowald6465]

It would be better than a lot of shows.

[@baseddepartment9656]

This is his TV show.

[@LouCatron]

I always use paper tape. 30+ years ago got a tip from a plaster guy, put a few inches of water in a bucket and wet the paper tape lightly. put it between two fingers to get excess water off. then imbed it into the mud. especially on hot days the paper will suck the moisture out of the mud and potentially peel, this gives it that extra moisture to adhere. I use the same metal/paper corners and wet them also. Have had very minimal problems. Also I use concrete trowels on the field mud, especially on 2nd coats when feathering. Don't have the problems with the sharp edges leaving ridges. Concrete trowels have rounded ends on each side

[@hansangb]

@17:39 How you do anything is how you do everything. Paul's attention to detail is amazing.

[@deborahsimmons2414]

I absolutely LOVE listening and watching your expertise in action!

[@shellsterdude]

The butterfly patch was so cool. That was a new one for me.

[@davidmessersmith786]

I’ve done that before many times. I also trim the surface paper around the patch so the ‘flange’ paper is not built up two layers thick. It makes the feathering a bit easier.

[@gf8958-p7p]

I’ve actually heard this called the California patch. Can’t remember the source.

[@eschultz19661]

@@gf8958-p7pditto, always heard it call a California patch

[@HawkXe]

@@gf8958-p7p Same here. Never heard of it being called anything but Cali patch.

[@ArthurSouhrada]

Paul, I Learn so much from your Videos I can’t thank you enough for all the guidance.

[@timk854]

This is the episode I was waiting for as my new home will require a ton of drywall. Thanks team…. Truly appreciate you

[@BearMacTX]

Nice progress. We just ordered a full automatic drywall tool set from Level5 on black friday to do all of the drywall we need to do in our shops on our farm. It was over $4k, but I'm tired of doing it with only hand tools, and wanted to try out flat boxes, an auto taper, corner finishers, and nail spotters. Also going to be using skimming blades for the first time, so it should be fun.

[@rogerweaver7686]

When the kids were having their house built I told them to keep an eye on the contractor when he was framing. I told them if he cares enough to keep things tight in areas that will be covered, he will do a good job in areas that show.

[@JBaughb]

everything builds on each other. A poor framing job makes drywall more difficult to hang, which makes the tape and mud more difficult, which makes doors and windows more difficult to hang, which makes all the finish carpentry more difficult to get right. It can be frustrating working in those situations.

[@BG12222]

I love doing drywall, to me it’s kinda relaxing. I started doing it about 5 years ago and on the bottom of my pan I put a sand paper sticker that is used for safety steps so when the pan is wet it doesn’t slide out of my hand. Keep it up 🤙🏻

[@AnitaSquirrell]

Wow, amazing trick on that butterfly patch. I love it. I'll use it next time I have a hole in a wall. Thanks Paul!!! Great work team StudPack!

[@jeffp7958]

The hardest part of mudding and taping is the “leave it alone” part. I’ll mess with seams in a room for 3 freaking days cussing the whole time about how the heck these KZbin guys make it look so easy.

[@wesleykirkland7150]

Paul, Thanks for teaching me how to do drywall properly in a VERY easy to consume format! I need to finish drywalling some holes in my house and California/butterfly patch my neighbors house. Then do some drywall at a friend's house. This will help so much!

[@Kristina_Australia]

Paul you make the dry wall mudding look very easy to do and you explain the process so well. It's coming along very nicely, thanks for sharing.

[@allenmay8850]

I like how Jordan always asks questions that many of us are thinking. Like< "Do you really need to tape that if it's gonna get covered." Nice job Jordan.

[@pitsnipe5559]

Well timed video. I have a damaged section of ceiling at our church that I need to repair. Thanks for the tutorial!

[@kenklingler5533]

Great, detailed video on drywall mudding, taping, sanding and finishing! I have some 6-inch cans I want to replace in my kitchen ceiling, so this how-to video was super helpful! Thanks StudPack on another informative video. You guys are the best!

[@connecticutaggie]

For my butterfly patches, I put the piece up and trim the outside 1/4" cutting through both layers then remove the patch and remove the paper from the wall inside the cut line. Now, when you put the patch back the paper sits level and is a perfect match - no feathering required.

[@charblee]

Yay! Awesome to see this new video. I’ve never heard it called a butterfly patch. I’ve only ever heard it referred to as a California patch.

[@russofamerica]

Go Stud Pack! I'm a little jarred that these latest videos aren't centered on the dream home, after following that build for so long, but there's still so much to learn here. Keep killin' it, gents!

[@timothyloraditch8903]

I am getting ready to build out my new home office again since we are moving...I did it once in my current house and it was so bad....can't wait to use these tips to step up my tape/mud game.

[@travisk5589]

Stud Pack and bush radical are the 2 channels that I will listen to without needing to watch. Pauls narration is all I need to hear. Same with Dave Whipple's.

[@rosshanson3726]

that video from three years ago brought me to your channel and helped me finish my basement. 3 years later and I'm watching videos within the first 24hours they'r posted. love your work stud pack family.

[@MattersonSumlar]

The variety of textures in the kislux bags is impressive. From smooth leather to textured suede, there is something for everyone. I was also attracted by it. The price is not expensive, which is very attractive!

[@cooperw22]

Quick pro tip.. I saw the sponge, but one thing I found that works well and has been my goto for cleaning is a concrete hand brush! When I’ve been working with hot mud or it starts to get harden in the pan I grab the brush. Works like a charm. Keep up the good work.

[@arsenicjones9125]

I’ve given up on paper tape and have fully switched to using Fibafuse tape. It feels like it embeds better and I never have problems where the tape bubbles.

[@saljablo2767]

Paul does everything to perfection.

[@jessicahites871]

Fantastic video as always!! That butterfly patch is genius and is definitely going to help me do a better job patching!! Thanks for all your hard work and willingness to share your knowledge!!❤

[@hanko5750]

I had to grin, my S.S. pan like that one is over 20 years old and still going strong, as are all my S.S. blades. And I have a 32" skim blade .. that is the MAGIC!! Wife wanted smooth ceilings with "this old house" .. had all the fun. ;) And that is how I always make my patches, just never knew it had a name. .. enjoy seeing Paul pull out tools with personality. Biggest thing for people to learn is - Never DO-DO when DO will DO .. in other words, don't over work the mud, walk away. Putting away for the night .. I use a piece (or two) of plastic wrap .. no water.

[@htownblue11]

Some really great tips here. Where was this a year ago when I need ya Paul?!!! Drywall is simple in concept but if you don’t know some of these tips it can get much harder than it needs to be.

[@Geppetto04]

Always enjoy the craftsmanship being presented as easy and fun… the truth is the level of quality that Paul delivers is hard to find.

[@xrayaiz74]

You keep sharing the knowledge, Paul. I love it. Please keep it coming. I continue to learn so much from this channel. Drywall is very intimidating to me, but I do recognize it can be done well if the basic steps are followed. The tips you share about what size blades to use, applying multiple layers (after drying) to get to the final flat look, the corner material products, etc. It demystifies the overall process for me. I know i can do it and expect to mess up a few times. But, I now know what to do to correct the mistakes. Thanks for sharing.🛠

[@CitEnthusiast]

Some time ago Matt Risinger did a test on corner bead, metal against plastic. When the metal corner bead is impacted it bends, and cannot return to shape, so is not easily repaired. Plastic rebounds, so you may have cracked mud but that can be easily fixed and painted over. Nice to see this revisited, newer videos get more people involved.

[@steveloux4709]

Just keeps getting better guys. That looked like a one-take outro.

[@CliffsideStables]

I wish I had access to this episode in the mid 1970s when during a college summer I was a “nail and tape boy”. Had little training and no awareness of different size blades. My summer would have been a much better experience if I’d had this information! “Keep on Keeping on!” Tim in northern TN

[@timturkelson6413]

Such great advice and given with awesome enthusiasm! Also appreciate demonstrating the common mistakes that Paul clearly has made and taught himself to avoid so we can avoid them.

[@theneighborskitchen]

Thanks for this! I have struggled with drywall finishing since I got into projects. I might not be so hesitant next time, saved to my favorites! Be well my Stuff Pack family!

[@supahmario2532]

Solid video guys. I can't think of anyone else who can revisit an already-covered topic and still make a video that's still so worth watching. The butterfly patch was the highlight! Regarding premix vs hot mud, I'd love a deep dive on which you use for different circumstances and why, based on their properties. I had to figure that out by trial and error as I went. I'd love Paul's wealth of knowledge on this topic as he does such a variety of drywall applications all at the same time. Keep it up fellas!

[@abad_gtr1123]

i love these videos. can tell Paul has years of professional experience as he makes everything look soo easy...not to mention the great tips along the way!

[@KarelKraakei-g5j]

Paul is such a chad, he really knows how to do ALL the work

[@MuggsAgee]

Paul your tips are so valuable, I especially liked the butterfly technique all of your tips are 1st rate, plus you guys are so easy to watch, thanks. . .

[@vannk73]

Stud Pack. Getting the job done. Must feel so good! Thanks for sharing, guys.

[@Wolfburns]

The remodel is looking awesome! It is all the old school Stud Pack vibes. Thank you for the awesome tips with fantastic videos. Jordan you really rock for sharing your dad with us all.

[@johnstuart3390]

Always great videos. Lots of information. Keep up the good work guys!

[@elainerussell924]

He asked jordan what he was skimping on ! Paying you dad !!!!😮

[@imlon2]

Love that ceiling texture @23:02 My whole house is done like this.. Skip Trowel. Very easy to do, and helps hide and flaws, and supper easy to fix future dings too.

[@dazziola]

Genuinely excited to see these videos hit my inbox every week. You guys are killing it!

[@johnviewer2305]

You are a true professional.. And a very good teacher...keep up the great work...

[@LikeAnOldFordTruck]

That original taping and mudding video is how I found this channel!

[@resellerrunner5149]

I learn something new on every StudPack video! Paul continues to be the master instructor! Way to go guys!

[@jayeoliver9259]

Learning so much with each video. Thanks a lot!

[@evoflux]

The yellow progress bar for the internal ad was a nice touch. First time I haven't skipped past what the sponsor is in a long time.

[@syence_nird]

Another great video!! Just as an FYI, I am sure you know but maybe you prefer taping instead. You can also get paper bead for inside corners which I find makes it way easier for beginners to get a clean straight line without the fear of tearing through. I used to tape all my inside corners until I tried the paper beads and I find it looks much nicer and simpler. Beginners will find inside corners frustrating.

[@nnamrehck]

Always fun to watch you guys work! Great tips too. TY

[@SephYuyX]

StudPack videos are the only thing I look forward to in life anymore.

[@daxmas625]

😂 that is the truth for me too!

[@Fsuholley]

😂😂😂😂😂😂

[@ZachAshcraft]

Enjoying the remodel content. What's the latest on the garage? Y'all waiting on a CO?

[@TimothyDement]

Adding a little dish soap scented or unscented also will help the mud to be smooth and easy to apply

[@tylerbarrett6652]

This is all good stuff to know. Drywall is my least favorite job in a remodel.... well, the sanding and the remudding and the sanding....and did I say sanding? Yeah. I knew a guy who did his inside corners sort of like you did the butterfly - he scored the back of the sheet of drywall and when he snapped it he'd end up with a 2-part corner piece of drywall and the paper would not be broken. It didn't work in all situation... but he managed to get it done nicely. I've tried it a few times... and I'm definitely not as proficient as he was - but it worked out okay. Thanks for showing us some of the tricks of the trade.

[@comicsfan1973]

Thank you for this great video. I saved it on my Construction folder so I can watch it next time I fix holes on drywall.

[@kellyphillips9556]

Up here in Canada (I'm sure down in the states as well) we have a woven fiberglass tape (not mesh) called Fibafuse, you can even get it in 6" and 36" wide rolls. It goes on thin, no bubbles, less feathering, less mud, less time, everybody who tries it loves it. Only use paper tape for corners now. Try it if you can find it, you'll be a convert.

[@bmack6386]

Thank you for the X sense recommendation. I have been looking for a new smoke/gas detector. This is exactly what I need.

[@rmac7612]

no even the biggest commentator , work in construction , love the fame music !!! really njoyed the shelving in garage video !!! class channel

[@chitza3270]

The water trick to overnight the mud has saved my a$$ and my pocketbook several times in the past 3 years. Thanks, Paul.

[@dgeoffreyfitton2836]

Thanks for the tips and tricks Paul, you set the bar very high for quality work !

[@OtterBeSwimming]

Love it, I wish I had these kind of suggestions years ago when doing lots of remodelling. Keep up the great work, fun to watch and glad I am not doing it again.

[@rickfromboston]

Good job guys! You should do a blooper reel, I’ll bet there’s some comedy gold there!

[@stargateproductions]

I'm not a fan of the paper faced metal corner beads but they are faster and don't require mechanical fasteners like traditional metal corner beads. I prefer the strength of a vinyl trimtex corner bead. You can hit those with a baseball bat and the will be undamaged other than the drywall mud chipping out. They require more work and take one more coat of mud but if you use the correct glue and use a setting mud for you're first coat, they are the strongest corner beads on the market. I don't do production anymore so I can use the slower, better materials.

[@jrnovosel]

Nice job! I love the attention to detail.

[@jerrylittle7797]

BOOM! "What are you skimping on?" That is next level craftsman stuff right there!

[@briankowald6465]

I like these kinds of videos because it’s more realistic to what I would be doing. I won’t be building a house myself.

[@ChaiLatte13]

I didn't realize the stuff in the boxes was mostly ready to go. I thought it was going to be powder! haha Your Dad is quite the guy for doing all of this with you guys. My Dad wouldn't even rehang a window shutter after a storm and let our family house go into disrepair. I see what having a healthy parent looks like.

[@brianhopkins5251]

that butterfly patch is ingenious.

[@alanyoder7629]

It’s the old method. Most people call it a California patch. Personally, I don’t use it. I much prefer the block method. My “secret” to not having a bulge is to use thinner drywall for the patch then thin coats of mud to create the smooth finish.

[@germanhabreu]

Paul is awesome. 💪🏼

[@Ryansroga-wm6pj]

I like those butterfly patches pretty slick nice work…..👍

[@YouDontKnowMe-qd2mc]

Just saw my first video today and instantly subscribed! Finished catching up on this project watching back to back videos, very entertaining and informative! Thank you for this content!!!

[@StudPack]

We're stoked to have you join the crew!

[@Stashmo]

FibaFuse makes 3-feet wide rolls of a fiberglass fabric. I like it way better than the grid stuff.

[@weekendhomeprojects]

Nailed that outro on the fly, love it!

[@catsmeow5566]

I was just wondering when the next video would be out. I personally prefer the mesh tape over paper, but I've only taped and mudded once (on cementboard) and it was a pain. My mud set up waaay too fast. LOL. Smoke detectors are a good idea. Also a good idea to have a fire extinguisher and to know how to use it. I like the plastic corner trim and edging for drywall. The tearaway bead is great. I used it in my bathroom for the cement board edges. I even found use for the strips that I tore off.

[@travis7500]

If you don't have a 3' roll of fiberglass mesh, you can use a dryer sheet for larger patches. It might not be big enough for one that size, but it may be close. Anyway, it's much like a fiberfuse material for the dryer sheet, and it'll give you a lot of strength, surprisingly.

[@FredD63]

Paul, you can use the metal stick on patches as well. They work pretty good and don’t raise the surface. They have them at my supply house that I deal with, but I think they have them at Home Depot and Lowe’s and at Menards if you have them in your area….. 🇺🇸👊🏼👊🏼✌🏼🪚🔨

[@jeffreywitt1]

Level 5 finishes, love it!

[@mitchr931]

Nailed the outro

[@lindakitts4304]

That corner is what I needed to know! I’m ready to mud my bathroom but that corner had me stumped!

[@marshallz4]

i find mixing is best with a corded drill. less burn up for those who may drill toooo long, mainly w grout, mortar

[@notta3d]

Great video as usual. We use to use that tape all the time. We always referred to it as fiberglass tape.

[@ddutton0]

I love it! This is a master class in drywall in a remodel

[@richardcooper]

Paul of the King of Outros and DYI :)

[@jeffjt5]

That outside corner looks great!

[@Sammywhat]

Outstanding content as always. LOVE this channel!! You guys RAWK!! 😉