How to test a Motor Brake

Drive Technical Service, How to test a Motor Brake

[@jorgehernandez-oy4mu]

Si el rango esta entre 35 y 60 para normal y si esta entre 115 para arriba

[@jorgehernandez-oy4mu]

If the range is between 35 and 60 for normal ,what happens if the reading is between 115 and more

[@ricardogarcia9295]

Thanks for your information. I was dissapointed when measuring the resistance of the brakes in the motors of an invacare tdx sp i got from thrift . the resistance was giving ol reading. After viewing your video i tried again after engaging the gears? And Yes!, the correct resistance was shown

[@michaeldominy2084]

Hi, Can you explain why you can stop a rear wheel from turning when engaged,plz.🤔

[@daveevans4391]

Hi, John, Love your articles very interesting to listen and learn. I have an Invacare Leo scooter. I have tested the brake as you suggested and there isnt any reading coming from it. Disconnected it from the motor and everything seems OK. Strangely when I move the neutral lever the magnet is released and the large nut that grips the motor is freely moving. Would it still be the brake at fault as there wasnt any reading. Thanks for any help. David

[@tripichito]

Hi Jhon...thank for you assitence...I have 2 motor brakesr and the measure are: 0.6 ohm and 60 ohm... in this case one of that is bad.... how can i do if i dont have a new motor braker?? it´s possible disable or jumpers?? Thank for your help...i waiting for commentaries.. Regards...Julio Cesar

[@michaeldominy2084]

Are all these tests direct from the battery or does the ignition have to be on.?

[@josefranciscosantana7086]

Puede un motor de scooter funcional sin el freno eléctrico

[@ricardogarcia9295]

Se lo tienes que quitar. Y si funciona sin el

[@blakerail7177]

I have to ask my jazzy right side hesitates to move you think it could be the brake sticking

[@nicoletadeaconu8609]

the brake resistance is 35 ohm but when the on-board current drops with a line the brake does not unlock anymore, can you help me with some advice please

[@colron5727]

Great info & thank you.

[@jaimecamacho9303]

how do gig

[@teanchen8370]

hello dear what is your motor name? may you let me know, I want to buy it! thank you very much.

[@joshusdog7677]

Hey, Nana is having a problem with her motor brake. I know how to test and remove it, but is there a way to fix it if it is bad or is replacing it the only option? I have all the necessary tools to pull apart and solder nearly anything so should I take a whack at it or not? O_O

[@automoto95]

i got a quastion can i use a 300w 15A motors with 40a dynamic 5.2i controller ? will it work?

[@HamzaHamza-qt2qi]

ساعدني انا اريد هذا المحرك لكرسي

[@fluenty9]

was going to ask a question then i realised no one has been answered lol

[@kingwillpenn]

I get a reading then it drops to zero instantly