How To Time a Sewing Machine(Review Pfaff 1245-706) -Car Upholstery

[@Cechaflo]

Related videos: How to time a Pfaff 1245-706 kzbin.info/www/bejne/onjLoIKpp55kqM0 How to time a Singer 241-12 kzbin.info/www/bejne/f3vZmWqvpLOBatU Adjusting of tensions for Paff 1245 kzbin.info/www/bejne/lXyse5WJadCbr9E Adjusting of tension for Singer 241-12 kzbin.info/www/bejne/qHuof4uCh82Lh6s How to thread a Pfaff 1245-706 kzbin.info/www/bejne/fmXWgKyMfr57qpI

[@eriettehernandezperez9120]

No está en espanol

[@andyshane4167]

Most valuable KZbin video I've ever watched! I spent all morning with an exact twin to your machine -- our paint is even worn the same way -- just to fix the problem of skipping one out of every fifty stitches, ended up with a mess. Tomorrow will be a better day, thanks to you!

[@phototec]

My 1245 is skipping stitches also, did you get the skipping stitches fixed? Was your machine timing off and that caused the skipping stitches? Thanks

[@rgetso]

This is an excellent video explaining needle-hook timing. This is exactly how Juki (and Chinese clones) leather sewing machines work, too. Beginners must make sure to install the needle scarf facing the bobbin or the needle will collide with the hook every single time. Great video!!

[@Cechaflo]

Most of industrial sewing machines are timed same way. Thanks so much for watching this video!

[@kque6054]

Thankyou, great video and helped me identify where the issue/problem was with the spool

[@starrwoman1]

I love your video, thanks so much for sharing, my Pfaff 1222E timing was off, thanks to you, I got it back on track. You made me an subscriber. :-)

[@conchosewing]

im buying pfaff 1245 soon, ill refer to this video if i got any problems! thanx!

[@gwenbykonen8829]

Best walking foot timing video!!!!!!!! thank you

[@Cechaflo]

I am glad the video is useful! Thanks so much for watching!

[@coachoverton]

Thank you for this video. I was able to time my 1245 perfectly. Mine is a little older model so there were some differences, but it is running smooth and quiet!

[@Cechaflo]

I am so glad the video is useful! Thanks for watching!

[@marisolvelazquez930]

Woow muchas gracias! Este tipo de tutoriales necesitaba para poder entender como funciona la máquina, al ser nueva en esto, hay muuchas cosas por aprender.. Gracias, Dios lo bendiga.

[@Cechaflo]

Estimada Marisol, ¡me da mucho gusto que este video le haya inspirado! ¡Muchas gracias por ver los videos!

[@CarmenMartinez-ni3zs]

@@Cechaflo hola don Cesar gracias. Por subir videos son buenos para aprender tengo una pregunta como puedo ajustar la tension tengo una consew 206 no si tiene algun video de ajuste gracias Dios lo bendiga.

[@Cechaflo]

@@CarmenMartinez-ni3zs Este video puede ser útil : kzbin.info/www/bejne/lXyse5WJadCbr9E Este otro también ayuda a entender el ajuste de tensiones:kzbin.info/www/bejne/qHuof4uCh82Lh6s

[@tuckerj.1793]

"MASTER"CRAFTSMAN! Excellent work my friend. I enjoy your videos. thank you for sharing

[@Cechaflo]

Thanks for kind comment!

[@Vitorenge]

Very very gratefull..

[@singhsantokh583]

Very brilliant 👌👌👌👌

[@mattcheng5962]

Great video. Much appreciated

[@KevinsaulRodriguezleon]

Disculpe la ignorancia, es triple o doble arrastre?

[@Cechaflo]

Generalmente las máquinas de coser son de simple arrastre, doble arrastre y triple arrastre. El arrastre es el mecanismo o los mecanismos que mueven el material a coser (tela, vinyl, lona, cuero/piel, etc.) hacia adelante o hacia atrás con el fin de hacer las puntadas. Ejemplo de máquina de arrastre simpel:kzbin.info/www/bejne/apLLXqZ_pbd6pKMsi=scGGNTIZsqLVhXy2&t=811 Diferencia de la máquina doble y la triple arrastre: Para la doble el arrastre del material se hace con la pata trasera y el peine de arrastre que es similar a la de simple arrastre. El pie que camina y arrastra es solo el de atrás junto con el peine. Ejemplo:kzbin.info/www/bejne/Z4TPkIqIn7acg5Ysi=psIIY51xhks9KBFM&t=168 En el triple arrastre intervienen 3 mecanismos: el peine de arrastre, la aguja y el pié de presion delantero. Estas máquinas son mas resistentes y el arrastre se hace sin fallas y la puntada es exacta en medida, porque hasta la aguja ayuda a jalar el material. Ejemplo: kzbin.info/www/bejne/i2Src4t4eal-pdEsi=FMh1xPQudZkswJyH&t=51 No dude en preguntar lo relacionado a tapicería. Responderemos si es posible con mucho gusto.

[@swordfish1120]

Excellent video. Do you have a video that shows proper presser foot pressure?

[@Cechaflo]

I do not have this video.

[@jambajoby32]

Will this video tutorial work w the 145 as well?

[@Cechaflo]

Procedures are similar.

[@alexfabiobarrosmendesmende3504]

Essa regulagem da lamcadeira serve para pfaff 546 tbm

[@Cechaflo]

I cannot assure that, sorry.

[@NikolaiPetkov-j6t]

Hello, can you make a video for the Pfaff 1245, how to adjust the needle (left, right and front,back). Because mine is a little to the left and slightly forward.

[@celiobarca3269]

Gosto muito da maneira que você trata essa jóia da pfaff 1245 , também tenho um grande carinho pela minha . Um abraço companheiro , saudações.

[@Cechaflo]

I am glad the video is useful! Thanks so much for watching! A big hug for you, too!

[@genaromadariaga691]

Gracias por la informacion

[@juanfortuno7120]

Cechaflo, vivo en wisconsin, en donde puedo comparar precios de la pfaff y durkopp usadas y nuevas. Con mucho respeto a otros tapizeros que sigo, tu eres el mejor para mi, la atencion al detalle que pones en todo lo que haces me enconta. (Muchas Gracias)

[@Cechaflo]

Estimado Juan, Solamente partes nuevas por internet provenientes de fabricantes en China: Amazon, Ebay, AliExpress, etc. Por ejemplo:www.amazon.com/Kunpeng-Industrial-Machine-HPF-151-CP-HPF151/dp/B07798TBWJ www.amazon.com/KUNPENG-91-141536-90-11-330964-15-Assembly-Machine/dp/B07GJF4GKY www.amazon.com/KUNPENG-Needle-PFAFF145-SEWING-MACHINE/dp/B0774FKNXK www.amazon.com/-/es/Tension-Assembly-91-009328-91-PFAFF-Modelos/dp/B07GYW1265 Para la Adler y otras es lo mismo. De partes usadas desconozco.

[@juanfortuno7120]

@@Cechaflo (Gracias, Gracias, Gracias).

[@juanfortuno7120]

(Cechaflo) no me explique bien, yo quise decir maquina completa, no partes, gracias.

[@Cechaflo]

@@juanfortuno7120 Por internet en mercado libre puede conseguir máquinas industriales usadas de diferentes marcas. En esta página también encuentra y sería mejor que fuera personalmente a escoger su máquina: www.advancedsewing.com/usedsewingmachines.html En Craiglist también: losangeles.craigslist.org/d/for-sale/search/sss?query=Industrial%20sewing%20machine Sailrite también vende máquinas industriales para tapicería:www.sailrite.com/Sewing-Machines

[@shanisimpson9233]

The only way I can get it to catch it hits the bottom. Any advice?

[@Cechaflo]

The shuttle mechanism is adjustable. Perhaps it is necessary to move the whole set a little bit to the right side.kzbin.info/www/bejne/onjLoIKpp55kqM0si=9xFkSLXbJdxxn7Ne&t=704 The needle should pass/touch the rotary hook mechanism wall. kzbin.info/www/bejne/onjLoIKpp55kqM0si=xX85bTHRl5gRva8G&t=1073

[@samuelhatin793]

Thank you @Cechaflo for the video, this explains really clearly how the machine works. I have a slightly more recent model (all white and more square) Pfaff 1245, adjusted it according to the manual and following the same steps in your video. I sew nylon webbing and fabric, with varying thickness, and it seems the machine is not able to make strong stitches with lighter materials. The stitches are weak and don't always fully complete due to the lack of tension. Sewing very thick stuff seems to be alright with decent tension and stitches. Is there a way to adjust it for lighter fabrics? Already went through the timing procedure multiple times, tried many tension combinations and running out of ideas on what to try. I have another walking foot which has no problem with the same thread needle fabric combination.

[@Cechaflo]

Perhaps you shold adjust the time a very little faster to catch the upper thread loop faster. It helps to alleviate the upper tension. You would not need to tighten it too much. Some plastics while sewing the holes get closed causing disadjustment. The solution is a bigger needle to make a wider hole in the plastic material. For lighter fabrics the first step is the use of a thin needle and thread. It could be a 90=14/ 100=16 and 110=18 needle size with a thin thread 69 or 46 size.

[@samuelhatin793]

@@Cechaflo Thanks I'll test it out!

[@sergioezequielmamani6366]

Quería saber altura que tiene la punta de la barra de aguja con la chapa aguja en punto muerto inferior, usando aguja DPX17.

[@Cechaflo]

En mi máquina la tengo a 17 mm del nivel inferior de la barra de aguja al nivel del peine que tiene el hoyo para que pase la aguja. Tomé medida en el punto muerto inferior. No tengo idea cual es la medida exacta al salir de fábrica.

[@sergioezequielmamani6366]

@@Cechaflo muchísimas gracias, muy amable, usted es un maestro...

[@Cechaflo]

@@sergioezequielmamani6366 Estimado Sergio, ¡Muchas gracias por ver estos videos! Un cordial saludo.

[@reckonill]

Howdy...parts finally came in and it has forced me to realign quite a bit and retime. I can get my 1245 stitching fine forward, but when back stitching, I'm bending or breaking needles eventually...especially when moving fast for long runs. The bend is at the scarf and towards the bobbin holder. Do I just have the needle too close to the bobbin case when I start the adjustment...or perhaps too much top tension causing the needle to bend? Any tips for solving my problem? Thanks again!

[@Cechaflo]

I cannot figure it out yet. My only advice would be to set it in reverse and by hand move the hand wheel to search what is rubbing and causing the issue.

[@reckonill]

@@Cechaflo When you set you initial positioning, should the needle lightly touch the bobbin case, or should there be no contact?

[@Cechaflo]

@@reckonill Practically the needle belly passes close to the bobbin case(no touching) kzbin.info/www/bejne/poKqgZefjpugb7c

[@sergioezequielmamani6366]

Hola , que altura tiene de la chapa aguja a la punta de la barra de aguja en punto muerto inferior?

[@montaser680]

thank you for these information

[@Cechaflo]

I am glad to share. Thanks for watching!

[@alejandrorosas4532]

Me gusta como demuestra ,de casualidad prodia hacer uno para doble hauja en poste compre una pero esta desicalibrada y el presser foot esta bien afuera y no entran en los hollos de avajo , esuna singer 138wsv102hp y no tengo idea donde empesar ,selo agradeseria demaciado don cesar , saludos desde kansas city ,

[@srkiiq08]

I have a Necchi 958-101 walking foot machine. I have a problem while sewing and that applies to stitches. The stitches are uneven. By no means can't adjust the thread tension because when I sew slowly, it is somewhat fine or more pulls the upper thread and when I sew quickly, then the upper thread pulls the lower one and can be seen on the stitches. I used your videos as a reference to set the timing but again it's not the same machine, so I would ask you if you can tell me what the problem is. I would be very grateful.

[@Cechaflo]

Perhaps, the problem is in the bobbin tension. The bobbin has a little metal sheet that acts as a spring. Due to daily use, it looses the resilience property. kzbin.info/www/bejne/lXyse5WJadCbr9E

[@srkiiq08]

@@Cechaflo Thanks for your reply I tried everything. That's not the point either. Maybe it's a bigger breakdown. In the end, I will give up because I don't have a machine repairman in my city Sorry if English is bad, because I use google translate

[@pfaff145tippmann7]

Que modelo de cámara usas para este video tiene buena calidad. Gracias

[@Cechaflo]

Una disculpa, no vi el comentario hasta hoy. La cámara es Canon Vixia HF R42 53X Advanced Zoom 32X optical Zoom

[@pfaff145tippmann7]

Cechaflo gracia tarde pero seguro😀 .si no es mucha molestia me puedes decir cuantos milímetros de largo hace la puntada tu máquina PFAFF 1245. Quiero comprar una de ese modelo pero quiero saber si hace larga la costura.

[@Cechaflo]

@@pfaff145tippmann7 La 1245-706 da 6 mm máximo de puntada. La 545-H3 es muy parecida. También está la 145 Estas versiones son antiguas fabricadas en Alemania. La versión moderna de 1245 da 10 mm de puntada máxima. La patente es alemana y fabricada en China.

[@pfaff145tippmann7]

Cechaflo gracias por la I formación . Pensaba que hacías 8 mm la que tienes.tengo dos Maquinas la PFAFF 145 H4 y la PFAFF 545 H4 y al igual hace 6 mm no mas de 6. Boy a mirar la nueva que me dices.quiero una que de 10mm ho 8mm. Muchas gracias 😊

[@Cechaflo]

@@pfaff145tippmann7 Esta es la Pfaff 1245 versión moderna que da 8 mm kzbin.info/www/bejne/kJebiaiAds2Ghdk www.pfaff-industrial.com/en/portfolio/sewing-machines/flat-bed-heavy-duty/pfaff1245 Esta Juki da 9mm de puntada.www.amazon.com.mx/JUKI-dnu-1541-Walking-m%C3%A1quina-coser-industrial/dp/B005I5DU4U Esta Consew da los 10 mm de puntada.www.consew.com/view/consew-model-206rb-5

[@gilbertodiaz-castro626]

You don’t show how to time it, just how it works. What when the needle is above the needle plate before the hook goes by?

[@aubreyaub]

Yes, just pulled some bits of my new chinese machine, to deburr components, had removed the rack and pinion to the bobbin. Wondering how to set up the timing. Then along comes "chechaflo". Thank You.

[@Cechaflo]

I am glad the video is useful! Thanks for watching!

[@fernandoDiazGonzalez2015]

Greeting from Colombia, I require your collaboration, I am doing maintenance for a pfaff 1245 machine, I want to know if the height of the needle bar should be moved to 17 or 18mm so that I can sew leather with a plastic package that is to ensure hooks to the car seat. What happens is that the needle when sewing this material breaks the thread. Can you please tell me if it is advisable to raise the needle bar 18mm or should it be left as indicated by the manufacturer in its manual at 15mm. First of all, thank you very much and I look forward to your comments. sorry for the english, i use google translator. Cordial saludo desde colombia, requiero de su colaboracion, estoy haciendo un mantenimiento para una maquina pfaff 1245, quiero saber si la altura de la barra de la aguja se debe mover a 17 o 18mm para que cosa cuero con un empaque plastico que es para asegurar ganchos a la silla del carro. Lo que pasa es que la aguja cuando se cose este material rompe el hilo. me puede indicar por favor si es recomendable subir la barra de la aguja 18mm o se debe dejar de manera como lo indica el fabricante en su manual a 15mm. ante todo muchas gracias y quedo atento a sus comentarios. disculpas por el ingles, utilizo google traductor.

[@Cechaflo]

Estimado Fernando, mi sugerencia es no alterar y dejar la altura de la aguja en su posición normal como viene de fábrica. En mi punto de vista la rotura del hilo es por otro motivo. Sucede mucho con materiales plásticos que al pasar la aguja con el hilo se 'ajustan' y no dejan que el hilo superior forme el 'bucle' debajo y el gancholo agarre. Mas bienpasa rozando, lo deshilacha y lo rompe. Me parece que la solución es usar una aguja de punta redonda y mas gruesa, para que abra agujero dejando que el hilo pase libremente y haga su ajuste(lockstitch) correctamente.

[@Dubvenezuela]

Hola que tal ,le hago una consulta he comprado una maquina de poste marca pfaff 193 -705/03 y no se como ajustar la puntada ,sabe usted como puedo hacerlo ? Gracias por sus videos

[@Cechaflo]

Estimado Edgardo, nunca he tenido una máquina de ese modelo y no tengo idea donde esta el regulador de puntada que si debe tener. Puede estar en la tapa superior del cabezal el mecanismo. De ser así debe estar un botón el que hay que presionar para que desenganche y mueva el peine de arrastre, mientras se mueve el volante de la máquina en vaiven. Para adelante mas puntada y para atrás menos hasta cero. Sería parecido al modelo Singer (min dieciséis:20) que si regula puntada pero no tiene reversa. kzbin.info/www/bejne/apLLXqZ_pbd6pKM Si no se le encuentra ningún regulador, es muy posible que sea de puntada fija de 3 mm de largo que es lo mas usual en la fabricación de zapatos.

[@bossehenry9995]

Vert nice

[@madhusudhanparmar7406]

Price please Iwanted to byieng dhis machine

[@pfaff145tippmann7]

Hola me gustan tus videos tengo una maquina PFAFF 145 no puedo arregular la costura la hace muy chica y tiene quiero que aga la costura mas larga podras hacer un video como arreglar ese problema estoy suscrito a tu canal gracias.

[@Cechaflo]

La Pfaff 145 es muy similar a la 545 y a la 1245. Muy buenas máquinas industriales. Me parece que la puntada mas larga es de 6 mm igual a la 1245 que muestro en el video. Trato de entender que estará pasando con su máquina. A lo mejor los dientes de arrastre están muy bajos y no alcanza a jalar el material. Puede estar el problema también en la palanca reguladora de puntada. Es necesario también que estén sincronizados, el peine de arrastre, la aguja y la patita pequeña, porque su máquina es de triple arrastre.kzbin.info/www/bejne/i2Src4t4eal-pdE Ojalá pueda solucionar pronto este problema.

[@oguzturku4992]

Is it possible to sew thin materials on this machine?

[@Cechaflo]

According to Pfaff 1245 manual the thinnest needle for this machine is 110 (european measure)=18 (american measure) This needle can be used for thin leathers and medium fabrics(denim). It is not advisable for too thin fabrics because the needle hole in the feed dog is big and the material could be pushed in down through.

[@oguzturku4992]

@@Cechaflo Thank you for the information. And at what price can you buy such a car, (but used) in Europe?

[@Cechaflo]

@@oguzturku4992 I have no precise idea, but I have found some information:www.anglosewing.co.uk/used-industrial-sewing-machine.html www.hobkirk.co.uk/industrial-sewing-machines-used?page=all

[@deannagoodman1989]

I have the exact machine pfaff 1245 and it skips a stitch here and there is it the needle? Because every needle i install is the same.is it the timing? Please help me

[@Cechaflo]

Before doing anything, check if the needle is the correct one. I have read that the system for a 1245 is 135-17 (the needle is 44 mm long approx. from the butt to the point) The needle bar goes downwards to a dead point. It should go upwards then. The upwards movement of the needle bar should be at most 3 mm. This is the moment the hook point of the shuttle should be in the middle of the needle scarf...I mean above the needle eye. This little upwards movement causes the upper thread to loosen and forms a loop that is caught by the hook point of the shuttle. Notice that the hook point should pass very close to the needle scarf. If it is a little far away it causes the skipping of stitches. Do not forget thin needles for thin materials. If I would sew a thick material with a thin needle it could happen that the needle bends and the hook point does not reach the formed thread loop. kzbin.info/www/bejne/lXyse5WJadCbr9E I hope this information is useful!

[@pickkabooo]

thread broke while sewing on my pfaff 1245.. I removed the bobbin (3 screws) and removed the thread.. now it doesn't want to sew.. if it sews I need to bring the needles lower than what it was.. what do you think is wrong?

[@rukminiboli6700]

Agar shuttle ma daga phasa tho kasa nikalna ha

[@bossehenry9995]

If i want yo chanje thé timing belt how l can do this

[@magdarhiat834]

Thank you so much for the Video, i have a pfaff 545 h3 i have Problems with Timing, i did the same steps, what you did ,but everything did not work .😔😔😔😔

[@cjsheikh3672]

Hey I am really impressed by stiching so I wanted to know which thread and what size thread do you use.

[@Cechaflo]

Upholsterers as a daily basis mostly use the standard polyester thread number 92 kzbin.info/www/bejne/rKXJo5Z6iJqKgLM www.thethreadexchange.com/miva/merchant.mvc?Screen=CTGY&Category_Code=polyester-thread-092

[@genaromadariaga691]

Con ese video pude poner a tiempo mi máquina y ya no ocupo al mecánico al menos para ponerla a tiempo

[@monissiddiqi-zl1fe]

Faaf 1245 masin he usi taimng kesi seht kre

[@LeifDjurfeldt]

should be about the same with an older 145 H3 I think to

[@Cechaflo]

Yes, the Pfaff 145 H3 is very similar to the 1245 I show in this video.

[@LeifDjurfeldt]

@@Cechaflo just did it! :) Thank you!

[@SkSk-wo8kq]

এই মেশিনের নাম টা কি একটু জানাবেন প্লিজ

[@Cechaflo]

Pfaff 1245-706/47

[@SkSk-wo8kq]

@@Cechaflo ভাই মডেল নাম জিজ্ঞেসা করি নাই মেসিনের নাম টা কি

[@mohamedhassan1649]

Is it for deaf??? No sound!others we like noise

[@عليالجزائري-ط6ر]

Good God to you

[@Cechaflo]

Thanks for kind comment!

[@sk8allica1]

you deserve a subscribe at least

[@ЛЕХАТЫБЫЛПРАВ]

Как дела! Здоров? Все o.k.?

[@sallymcmillan6110]

😮I’m soooo confused

[@Cechaflo]

If you have the same machine, feel free to let us know your concerns.

[@rajusah9325]

Ks9910 timing sting

[@gio1135]

0:29 what on earth is wrong with ur finger

[@tracygoodman6525]

No damn good. Does not show step by step how to do the timing!

[@Cechaflo]

Hopefully this other video might be useful kzbin.info/www/bejne/onjLoIKpp55kqM0

[@servetusta6310]

Pörfekt