How to to undervolt your laptop GPU?! | MSI Afterburner

[@duyluong8728]

I had my CPU undervolted and now also my GPU. Thank you a lot, you did a great job!

[@laptoptweakingtips]

stoked for you brother especially considering how scared you were initially happy to help :0

[@duyluong8728]

@@laptoptweakingtips yeah, I dont have much knowledge about firmware bro :V But ts bench seems not really reliable, I lock the freq at 41 (my max 45) and run 960M. The scrore was okay but when a load a 4vs4 AoE4 match, my laptop crash 😫

[@AlexMetodiev]

Hello, thank you really !!! I watch a lot of your videos and now I'm rocking with my laptop STABLE 120 FPS WITH STABLE 70 + 1,2,3 C TEMP on high graphics Lenovo IdeaPad gaming 15ACH6 RYZEN 5 5600H 16 ddr4 3200mHz 1 TB SSD GTX 1650

[@laptoptweakingtips]

Sure thing bro Thanks as always for watching and I'm stoked it's running smoothly for you 💪💪

[@SShreyas17]

Can you share your settings, bro? I have the same model and that might help me

[@JoshBsm7yx]

Can you share your settings?

[@merylltombado6718]

i have GTX 1050 and this method is the most working method ive ever tried bloody jesus, from 80c to 60-65c how in the hell does that worked take note ! i maxed all the graphics settings in my game while testing and yes ! still in 65c with stable fps ! bloody hell

[@laptoptweakingtips]

That's what I call a result 🤘 The feedback I like to hear and see!!! Stoked for you brother 💪

[@merylltombado6718]

@@laptoptweakingtips i hope u never die 😂☝️

[@laptoptweakingtips]

@@merylltombado6718 hahaha Well I stopped playing in traffic awhile back so I think I'm safe for now 🤣😂

[@deniskasin2394]

any issues?

[@merylltombado6718]

none @@deniskasin2394

[@A.H_610]

My card after adding 100 to my mhz it should be 1225mhz and it never show this value in my afterburner

[@phoenix3510]

I did everything correctly, but after doing this my gpu frequency lowers to 300-400 mhz (my base clock is 990mhz and it goes below it for some reason) and the fps in any game is terrible like 10-15 fps. When I reset all the settings then it again runs on 990mhz and fps is great around 60. what is happening I can't understand

[@Chad-ll6gr]

Easiest guide I have ever watched, thanks my guy.

[@laptoptweakingtips]

No stress, thanks for watching my brother

[@PUBG-Investigator]

Thank you i was trying several months didn't work only with your video i was able to do it.

[@finnbenchmarks]

Informative video very helpful dude

[@laptoptweakingtips]

Why thank you kind sir

[@Alchemytweaks]

Nice video man 💪

[@laptoptweakingtips]

Thanks my brother!

[@NaellSum]

thank you om

[@cooldual2464]

My laptop stops charging when I play games so I’ll try this later see if it stops it from happening

[@abelalgiffary33]

Cool video,this actually helped a lot

[@laptoptweakingtips]

Glad it helped my friend

[@sanaan0168]

thanks for this using it to undervolt my rtx 4060 laptop

[@laptoptweakingtips]

Sure thing bro Thanks for watching Nice laptop bro!!! 👌

[@Ahmed_Bakr_]

When I change my voltage nothing changes and it remains at the same normal power and does not increase

[@JoshBsm7yx]

I don’t think this work anymore

[@_neddy_teddy_8048]

this saved my laptop thank you

[@laptoptweakingtips]

awesome sauce bruv happy this helped :)

[@adeptalakay]

bro my undervolt keeps going im about to hit 700 what do i do after just leave it at 700 nevermind it crashed at 700 and i was able to get my mem clock to +625 i used occt to test vram it worked great because as soon as i went to +650 i would get errors

[@Samer_Design]

nice updated video 🔥💪💯

[@laptoptweakingtips]

Thanks man, the old one was horrible so at least this is a step in the right direction

[@hamoda378]

Pls help my problem is voltage is stable in benchmark but when I play game voltage spike from 850mv to 1081mv 😢

[@galaxxzy]

i wanted to do this but i think all laptop gpu’s that end with an m like my laptop’s gpu the nvidia gtx 960m 4 gigabytes vram is hardware locked, but i managed to undervolt my cpu somehow

[@rikiyabut]

Great guide, started from 900 and my crash/freeze dissapeared immediately and was able to play without any issue for hours, but before i had those issue every minute or immediately after launching the game

[@rikiyabut]

And yes my laptop is alrdy like 7yrs old but my 1070 still kicking with this kind of method

[@laptoptweakingtips]

That's great Another thing you could do is disable hardware acceleration in your browser, steam, VLC and discord Since the 535xx hardware acceleration causes issues. Ie freezing and crashing

[@laptoptweakingtips]

Nothing wrong with a 1070 - 8gb vram and a trooper of a card. It's twice as old as my GPU, but it whips it's ass no doubt 🤣😂

[@rikiyabut]

@@laptoptweakingtips yep great tips, i already did long time ago tho, appreciate it

[@laptoptweakingtips]

well im glad you are sorted nontheless :)@@rikiyabut

[@user-gf3yy3bo5x]

Not sure if it was intentional but your voltage control is not turned on, so the voltage control setting does not actually take effect. You need to turn on "unlock voltage monitoring" and "unlock voltage control." That's why your core voltage slider is greyed out and mv is at 0. My issue, however, is that even though I have those options turned on for my laptop. It still stays greyed out. For my desktop, it works. Quite odd.

[@laptoptweakingtips]

lol!!!! hahaha no this was just a generic picture of msi afterburner i pulled off the net to make the thumbnail :) as for your laptop what gpu do you have? undervolting the gpu is an option 10th series upwards

[@user-gf3yy3bo5x]

@@laptoptweakingtips it's the 3070

[@laptoptweakingtips]

nice one bro thats decent power :) there should be no issues undervolting that gpu :) what specifically do you mean greyed out? i dont recall anyhting ever being greyed out in msi afterburner, throttlestop perhaps but not msi afterburner@@user-gf3yy3bo5x

[@stefanpetrovski6934]

I don't know why but I saw that laptops have that option disabled and you can't change it. I also have a laptop and the slider for core voltage is disabled along with the FAN sliders on the right. Hope this helps a little even though I don't know the reason😊

[@laptoptweakingtips]

oh brainfart lol!!! i just always use curve editor so the core voltage slider doesnt even factor in for me - using the curve editor allows for perfect control as for temp limit and power limit dont bother with those at all. power limit was unlocked in 528.xx series of nvidia drivers, but i assume its always set to 100% since then as its locked now and most of the latest drivers perform better than the 528.xx series of drivers in anyway :)@@stefanpetrovski6934

[@danielashbladethegamer4425]

I know a south african when i hear one...Hehe lekker video brother

[@laptoptweakingtips]

Thanks my fellow saffa!

[@snoozysoul5724]

Hey when i applied the voltage change it the graph it did not change in the bar on top could you please help

[@oreoop7783]

i jut did this on my acer nitro 5 i5 8gb ram laptop . i did from 875 and i can see slight improvements . anyways thanks man

[@laptoptweakingtips]

I'm happy to hear that. Thanks for watching and commenting 🤘👌

[@Gerson_Car]

What setting on Msi did you use? Do you have a geforce gtx 1650?

[@bxindsdonuts]

bro? my gpu clock is 350mhz and it could go up to 1100

[@uzmakinardo5249]

How about cpu? My cpu got 90c

[@leightonwatson6517]

it doesnt allow me to do anything i cant save a profile or refresh

[@atasirenlikoy9594]

Hello mate. i have a gtx 1650 laptop and boost clock is shown as 1515mhz in GPU-Z But while gaming its 1755 mhz so could ı do it 1855mhz ? because its lowers the performance when ı go 1615 mhz I'm confused.

[@juandavidvegan6567]

Me sirvioo!!, thankss man Jaja

[@laptoptweakingtips]

Sure thing 💪

[@achlannoverdi]

i recently upgrade monitor from 1080p to wide 2k/wqhd, temp jump to 85c oc out the box 1085mv/1980mhz core clock, and just now undervolt my card at 850mv/1850mhz core clock temp go down to 55c from 85c and fps reduced only 5%, it's massive bro 😊 by the way i used gigabyte 3060 ti aorus elite

[@laptoptweakingtips]

thats dope bro the latest nvidia driver 546.33 also has a bit of temp reduction, for me it lowere temps on my gpu and cpu by about 2-3 degrees

[@achlannoverdi]

@@laptoptweakingtips i use driver 545.92 GRD desktop it's most stable with undervolt and underclock for me,

[@M1T1M]

Hey I noticed you have a Dell G15, as do I......Did you take all the dell crap off? and all the services etc, also did yours come with the alienware stuff for custom fan controls etc? ... sorry a bit off topic ..but tweaks related! 👌

[@laptoptweakingtips]

Absolutely bro That Alienware stuff is bs if ever there was any The only reason I'd keep it is for the RGB, otherwise id Nuke it hey

[@user-ym8bz7rv3b]

You fuckin broke my laptop

[@abhijeetbeniwal5033]

I have gtx 1650 , ryzen 5 3550 h , my fps dropper by 10 and temperature too dropped 10 degrees , i think it was worth it

[@AyushSharma-qc9fp]

Did it increase your performance or not?

[@abhijeetbeniwal5033]

@@AyushSharma-qc9fp i have mentioned that the fps decrease was 10 , means my performance decreased but my temperature dropped as well & it was worth it

[@isan6379]

any suggest setting for rtx 4050 105watt msi bravo 15?

[@laptoptweakingtips]

I don't know those numbers hey. Go about it with the suggested method I have set forth in the video using gpu-z That should have you sorted

[@Cupcake3372A]

I have GTX 1650 ddr6 version GPU z says base clock is 1380 boost 1515 .....and by default when I play games it pushes to 1785 MHz ....what should I do

[@swapnith8298]

same issue

[@stefanpetrovski6934]

Hey man! I just have one question. How do I know how much should I push the memory clock? From +100 to +400 how do I find the ideal number? Should I also test it in games until it crashes after I finish the undervolting + overclocking? I have a GTX 1650 as you have I just don't know if it's gddr5 or gddr6, have to check. Can you help me with this?

[@laptoptweakingtips]

For me it didn't crash, but beyond +400 my system became unstable. Ie my numbers started showing up weird on MSI overlay, I got no extra performance and it actually dropped my clockspeed to top it off

[@stefanpetrovski6934]

Okay then, I wont push it beyond that, but to be honest it all feels so weird. GPU-Z tells me that my boost clock is 1515MHz but when I play it fluctuates up to 1785MHz, so, I used 1785MHz in MSI since it comfortably ran at that speed even before I locked it with the application. Any thoughts on this? Thank you by the way👍

[@laptoptweakingtips]

@@stefanpetrovski6934 try set it to 1785 then, just be mindful that it could increase temps dramatically if you lock it in well beyond boost clock. If it doesn't great, but it can potentially cause +10 degrees If it raises temps use 1515+100 If it doesn't raise temps go ahead and set it to 1785 Laptops are trail and error mostly, 1650 laptops generally max out at 1785, but you have different power limits and cooling in different brands That's why use a video, like mine, as a framework and then do your own testing and fine tuning 💪👌

[@stefanpetrovski6934]

@@laptoptweakingtips It maybe increased 1 to 2 degrees celsius and I'm still trying to go lower with the voltage so I'll see, thanks man, all the best to you!

[@laptoptweakingtips]

@@stefanpetrovski6934 ok cool bro Good luck

[@user-bm8bt9us2m]

Does memory clock+400mhz really boost fps ?

[@laptoptweakingtips]

I answered you last question on my last video, please don't spam the same question bro

[@Jakiyyyyy]

Thanks for this video. For some reason in the GPU-Z, my GPU clock and boost clock has higher value than the default clock and boost clock. Should I follow the 1702MHz or 1852MHz? My Cyberpunk crashes at 850mV. So for the frequency should I go with 1700MHz + 100 (1800MHz) or 1852MHz + 100 (1950MHz)? Also my GPU temps stay around 80C.

[@laptoptweakingtips]

id say first try the 1700mhz +100 if it crashes at 850, try 867 or 875 how is your cpu as if thats hot invariably its gonna make gpu temps high irrespective maybe undervolt your cpu first and then undervolt your gpu afterwards, as cpu can drop temps between 10-15 degrees and gpu max reduction is give or take 5 degrees

[@sobareiwa4291]

My laptop temperature at 90 degrees

[@Jakiyyyyy]

@@sobareiwa4291 Try use +250 core, +1450 mem and 750 mv. Mine stay below 69 all the time. Very NICE indeed.

[@laptoptweakingtips]

Those are some pretty impressive numbers, you got some good ass dye

[@laptoptweakingtips]

I'm going to link a video to unlock undervolting in the next comment. Get your CPU temps in check and your whole system cools down

[@jima4595]

My power limit, temperatures limit and fan are greyed out...how do i unlock them

[@laptoptweakingtips]

That's normal on laptop GPUs It's normally only unlocked in desktop GPUs

[@Apit99]

When im tried to undervolt,and save the profile,it still showing me 400mhz for gpu,doesnt change.only the "mem" shown 6000.

[@arnoldestiphcruzhurtado5583]

Hello, what do you recommend for a gtx 1650? The turbo frequency is 1515 .

[@laptoptweakingtips]

I answered in the other comment bro. 🤘

[@leon_black]

Awesome video, but these graphs and memory and core clock speeds doesn’t work at all on my laptop.. Nvidia quadro m1000m can’t do anything

[@laptoptweakingtips]

Hey bro it's been ages! The m1000m is roughly a 960m or 950m equivalent, undervolting your GPU has been available since the 1000 series and up. I think that's why your struggling

[@gamerhemanth2369]

Hey should i downgrade to w10 or should I stay in w11 i have same gpu but r5 3550h and 8gb

[@laptoptweakingtips]

Performance is almost identical, in fact it's slightly screws towards windows 11. I just use windows 10 because I just like it's overall simplicity

[@roido4304]

do we have to find the lowest voltage or can we already stay at the stable one?

[@laptoptweakingtips]

Undervolt generally means go under regular voltage 800-850 is normally the sweet spot

[@KYOJIN8238]

I have an RTX 3050 laptop gpu which heats up wayy too much while playing cyberpunk at the lowest settings possible with native resolution. tried nvidia super dlss but even then the heating problem persists. even tried altering thru power plan but to no avail. need help on how to correctly undervolt my laptop thru msi afterburner. (also the fan settings are greyed out)

[@EDGERUNNER_101]

+1

[@gabriele4253]

hi i have a lenovo ideapad 3 with amd ryzen 7 37000u and Radeon Vega X 2gb… sorry for bad english im italian, but is worth doing the things you did in the video or maybe i should buy a sort of “adapter” for an external graphic card? Because 2gb is very bad for gaming… maybe with a 4gb external gpu i will have better performance…or not?

[@laptoptweakingtips]

I don't have anyy experience with that card, igpu An external more powerful GPU will always be better. Just remember though that you will be CPU limited though. My suggestion for the time being is to go through to my homepage, there is a CPU optimization video. I think for you it will be beneficial to streamline windows as much as you can to lighten the load on your CPU You're English is very good all things considered 👌

[@gabriele4253]

@@laptoptweakingtips ahaha thank you. So im going to watch that video , thanks again

[@laptoptweakingtips]

@@gabriele4253 sure thing brother If you need anything else just lemme know

[@zesty7216]

My memory clock is stuck at 5000mhz how do I fix it

[@david-kl8yz]

that means your laptop just doesnt support overclocking ram

[@achlannoverdi]

just click L again in curve panel so yellow line disappears

[@djokonaoko1523]

Ive managed to get 1890mhz at 832mv

[@dapage68]

I hope this gets out to everyone that reads this, IF you are having problems with your VR having stutters, lags, or other problems, TRY THIS, get into your game or sim, like normal, Start your VR Does not matter what Headset, When you are in your VR Games or sim, TURN OFF YOUR MONITOR, Because all Your resources will go to the VR headset and not shared between Your VR headset and your Monitor. Try this, You might be surprised just how better your VR is. Then when your done playing, take off You Headset and turn your Monitor back on, YOU DO NOT NEED YOUR MONITOR ON WHEN YOUR IN VR.? Save the resources of your Video Card to your VR headset. "Comment me back if you see a difference" OH and your Temp will be much lower on your Video card.

[@bebrik100]

Is it normal that my 1650m doesn't crash at 0.8v 1740 mhz gpu clock and +364 memory clock? Should I add more voltage?

[@laptoptweakingtips]

I wouldn't go lower than .8 All seems fine Play your most demanding games for 10-15 minutes To see if it's stable

[@clunkeys]

My boost clock goes up to 1950MHz (RTX3050Ti 4GB) according to official MSI Afterburner. But in GPU-Z it only shows that my boost clock is 1485MHz. What do I perform the undervolt on? 1950MHz or 1485 + 100 (1585)?

[@laptoptweakingtips]

Perhaps it is your variant of card, certain cards are under powered others are over powered When you monitor your gameplay with MSI Afterburner in game, what are the maximum clocks you get?

[@clunkeys]

@@laptoptweakingtips maximum it goes is 1950MHz and 6000MHz

[@clunkeys]

@@laptoptweakingtips sorry for the late reply. I'm getting 1950Mhz+/- at max

[@laptoptweakingtips]

@@clunkeys try go 1485 + 200 Because if you lock it in at 1950 it could actually increase overall temps But maybe try 1485+200 on one hand And then 1950 on the other hand If the temps are decent at 1950 you may as well lock it at that frequency However if it raises temps go with the previous suggestion Ps it isn't you that replied late, it's me who didn't see your initial reply 🤣😂

[@clunkeys]

@@laptoptweakingtips haha no worries. and thanks for the suggestion. my current temps do go very high, but I limit it cpu temps to 80c and still get the same performance. i understand that as I limit temps im subsequently limiting my tdp as well.

[@amfordonyekachi5947]

Yo bro i have a gpu but i can't find the overclock scanner😪

[@inkyx3634]

the msi afterburner download website is not available now... can someone give me a new link?

[@alansmods1775]

Undervolt doesnt seem to be working as it will always will be less than 1785 mhz and the temperature reduction isnt that much, I dont think its worth doing it for my gpu

[@laptoptweakingtips]

It's definitely worth it for your GPU, you said your GPU is 84 or 85 degrees That shouldn't be the case It should be between 60-70 under load Just go about the settings and steps carefully, don't skip to someone else's settings. Find what works on your system or else you are just wasting time bro and not reducing heat and optimising

[@alansmods1775]

@@laptoptweakingtips it's always not 84 buta average of 80°C , I will try to change settings again then

[@laptoptweakingtips]

@@alansmods1775 ok bro, it takes a bit of time, but its worth it... find your systems optimum settings... not someone else's your pc will love you for it

[@alansmods1775]

@@laptoptweakingtips ok bro,will try

[@laptoptweakingtips]

@@alansmods1775 dish dish boom boom!

[@furyfate9306]

Does it only work with nividia, i cant do anything on msi on my laptop

[@FN-170]

Soo I have a 1070 max q laptop, when I undervolt and drag the 900 mv dot up to boost and press apply, mine doesn't make a curve like yours. Mine looks more like a jump, any idea why ?

[@laptoptweakingtips]

As long as the frequency curve is straight it makes no difference my brother 💪

[@FN-170]

aight thanks@@laptoptweakingtips

[@laptoptweakingtips]

@@FN-170 no bro... Thank you for watching!! 😎

[@LCR-ds2ox]

I have a ryzen3, 12gb ram and 2400/maybe 2800mhz and its on ddr4, so I follow this still?

[@laptoptweakingtips]

The principles yes, not the numbers though Each GPU differs slightly

[@Itachi0123]

For rtx 3050 mobile Please suggest me settings i have tried so many but still games crash Boost 1950mhz 90 watt Any settings

[@laptoptweakingtips]

I don't have that care bro, and even if I did all GPUs and CPUs are different. You gotta apply the principles layed out here and find your best settings by trial and error

[@SurosNova]

Don’t boost mobile gpu that high. You’ll have better luck undervolting and getting a cooling pad/ getting professional help with the repaste

[@slick7x]

Can I use this on my acer nitro 5 i5-11400H 3050 with 16gb ram?

[@laptoptweakingtips]

The same principles yes The exact same settings no Each CPU and GPU is slightly different Spend a bit of time to find your ideal settings

[@purehollow]

Ihave 1560mhz boost, I overclocked it to 1785mhz and undervolted to around 825v and Temps reach 75c max is that good? By the way the card is 1650 gddr5 laptop

[@laptoptweakingtips]

If that's the case that's great, sometimes if you overclock your GPU too much it makes the CPU and GPU temps rise Whereas a slight overclock and undervolt will reduce temps The 75c is that on your GPU or CPU or just in general your system

[@purehollow]

@@laptoptweakingtips 75c on gpu, cpu is between 68 and 76

[@laptoptweakingtips]

@@purehollow is that in game If so then your golden... And lucky 👌 For some peeps it drives up temps into the 80s

[@arnoldestiphcruzhurtado5583]

Is this undervolt or overclock? . I want to reduce the temperature I have many fps

[@laptoptweakingtips]

This both to overclock and undervolt If you follow what I say in the video it would be your turbo frequency +100 (overclock) plus and undervolt. I have a CPU optimization video which includes a section on how to unlock undervolting if it's locked. That's the biggest source of heat in a laptop (CPU) I'll link it in the best comment

[@laptoptweakingtips]

kzbin.info/www/bejne/fJLTc2uena53qdU Here we go bro, step 1 how to unlock undervolting, step 2 how to go about undervolting CPU The rest are just general CPU optimizations that can help you 💪

[@Actually_Charles]

Him: open your most demanding game Me: ROBLOX

[@laptoptweakingtips]

Lol bro!!! 2-3 years ago my system was so bad that my most demanding game was Assassin's Creed Black Flag or better yet Prototype 2. I used to game on a igpu on a 10 year old business laptop

[@Actually_Charles]

Nice video, my laptop can run fortnite at 144 fps. My old apple computer can't run roblox.@@laptoptweakingtips

[@Plugandplay710]

i5 9300h : -250v -145v 1650m : 900 mv 1905 mhz 600 memory

[@laptoptweakingtips]

Nice one bro!

[@alansmods1775]

How u made that settings ? My laptop crashed at that undervolt

[@laptoptweakingtips]

@@alansmods1775 no man! Every laptop has different dye, different CPU, different gpu, so there are numerous mitigating variables It's trial and error, don't just skip to someone else's settings. Go at it systematically I help a lot of people, some have same CPU but they are different in terms of sensitivity to undervolting

[@amualkhall]

bro i have i3 8100 8gb ram 1650 low profile (220-180) psu 😂💔 btw i cant upgrade the psu cuz my case but should i do the same or not ?

[@laptoptweakingtips]

Sorry my brother, when it comes to laptops I know my stuff, but I'm essentially a moron at pc building and components So I cannot rightfully give you advice on that

[@amualkhall]

@@laptoptweakingtips I meant about undervolt und not about pc building, but I did almost as u did and it worked for me. the temperature used to reach 80-85, now it is 65-70. all I can say is ty for the video

[@laptoptweakingtips]

thats awesome to hear my friend!!! stoked for you!@@amualkhall

[@earljairus0313]

The fps are still the same, but the cpu temps seems to be lower, strange. And my boost clock is at 1515 so i boosted it up to 1615. Did i do it right?

[@laptoptweakingtips]

Yeah seems perfectly fine bro Slight overclock and undervolt 👌 What are you're temps? What CPU do you have?

[@earljairus0313]

@@laptoptweakingtips hi sorry for the late reply😅 temps went down a lil bit, (which is helpful) thanks, and the cpu is Ryzen 5 4600h cant overclock it though

[@earljairus0313]

@@laptoptweakingtips the temps are like 60-70 when not overclock it’s really hot like 70-97 playing the most demanding game in my laptop

[@laptoptweakingtips]

@@earljairus0313 check out a program called Universal x86 tuning Utility It's specifically for amd to offer temp reductions I've been told it's better than Ryzen controller There are a couple tutorial vids on KZbin 💪

[@moatasemssaid2594]

Is it normal to use the 7000mhz memory without doing anything? Graphic card 3060

[@laptoptweakingtips]

I don't have a 3060 myself so I'm not familiar with it personally However I think 7000 or 7500 is default so it looks normal

[@moatasemssaid2594]

@@laptoptweakingtips thanks

[@kskdofnrrrff82]

why i cant change the fan i have too laptop with 2 cards can i change it do you know how to fix it?

[@laptoptweakingtips]

Laptops don't allow you to change fan speed via MSI Afterburner, that's why it's greyed out Don't you have gaming specific software for your laptop Eg Omen software or Alienware Command Centre to name a few

[@kskdofnrrrff82]

​@@laptoptweakingtipsbut in the worst card i can change fan speed but not in the better one from nvidia

[@kskdofnrrrff82]

​@@laptoptweakingtipsi have armoury crate

[@laptoptweakingtips]

You should be able to change fan speed with armoury crate right?

[@mrfuk8332]

i have 1650ti should i do the same?

[@laptoptweakingtips]

use the same principles laif out here, dependant what your boost clock is you might have to make your settings a little different look in gpuz - find boost clock add 100 above boost clock, then test to see what mv to set your gpu to

[@liturgies]

Hi mate do you have any video on how to undervolt CPU?

[@laptoptweakingtips]

Oh but of course I'll link it in the next comment my bro

[@laptoptweakingtips]

kzbin.info/www/bejne/fJLTc2uena53qdU Step 1 how to unlock undervolting Step 2 how to go about finding a good stable undervolt in throttlestop And some other CPU optimizations 💪

[@liturgies]

@@laptoptweakingtips Legend brother. Also, are you South African by any chance?

[@laptoptweakingtips]

@@liturgies I plead the 5th! Yeah guilty as charged! Lol You?

[@liturgies]

@@laptoptweakingtips lol I’m American. Also quick question. My boost clock is only 1560 on nvidia 1650 so my undervolt I set to 1660 but I can all the way down to 700mV no crash

[@gamerhemanth2369]

Why dont we just use msi kombuster

[@laptoptweakingtips]

You can of course, I've just found that if I test it via my most demanding game I can get a good idea how it actually performs Literally just preference 💪

[@gersomyudha282]

i have simpler method that only work for laptop. simply add +100 (or whatever stable) to core clock, max clock still same, but less voltage

[@laptoptweakingtips]

I'll check that out, if it's simpler I'm all for it my brother!! 🤘 Ok just explain that again

[@gersomyudha282]

@@laptoptweakingtips so does it work on yours ? mine stable at +120. i have 1650 ddr6, max at 1785@936mv. with +120 core clock it's 1785@836mv

[@laptoptweakingtips]

@@gersomyudha282 I will check a bit later, previously when I just added overclock it did nothing to undervolt. So I'll be definitely looking into that

[@gersomyudha282]

@@laptoptweakingtips yeah you can check the curve after and before overclock apply. this method works best if you use optimal power, since it give better clock at lower voltage, than regular method that lower clock at lower voltage

[@laptoptweakingtips]

@@gersomyudha282 i dont follow my brother. when i say +100 it just messes the curve back to default, which kind of defeat the purpose of this video. is there something im missing as that doesnt work for me at all??

[@Gaddafist23]

thanks no more blue screens here

[@laptoptweakingtips]

Whoop whoop!

[@markdillon3023]

Hello, I am new to this😅 I have an Acer Nitro 5 with AMD Ryzen 5 mobile 4600H Nvidia GTX 1650. My boost can go up to 1515MHz, what settings should I use for MSI afterburner kindly?? sorry for my English

[@laptoptweakingtips]

I think work with 1615mhz as a start, but guage your temps bro, you can generally push a gtx 1650 to 1785mhz, but potentially raise the temps heavily if it's above your laptops cooling ability So start with 1615, if the temps are decent, then try 1650, ot 1685 etc etc Your English is just fine my brother, don't stress 💪

[@markdillon3023]

@@laptoptweakingtips Thank you kindly, I will give it a try. Yes, the temperature does get high which causes my games to freeze and then ultimately crash. Then when the laptop restarts, my Nvidia driver is gone and oftentimes, I have to run the command "sfc scannow" or dism /online /cleanup-image /restorehealth" with many failed attempts before it reappears. But right now the driver is fine and I am able to game, just by tweaking the clocks so that it won't get too hot

[@laptoptweakingtips]

@@markdillon3023 ok then maybe do 1615mhz max, but with an undervolt as per the video. But cpus are the main culprit when it comes to heat, so perhaps first use Ryzen controller to reduce CPU temps. I don't have AMD, so I don't have a video on that but I'll find a good video for you

[@laptoptweakingtips]

@@markdillon3023 try this guy for your amd CPU, see if he has any Ryzen controller videos as well kzbin.info/www/bejne/oWW5o4OEeJelhdk

[@markdillon3023]

@@laptoptweakingtips Thank you so much brother, I will give it a look! Oh, I definitely subscribed😁

[@gamerdimais8548]

I have a gtx 1650 but isnt on a laptop, if i copy your conf of undervolt will it be ok? Or laptop and desk are diferent on the undervolt

[@laptoptweakingtips]

Go through the steps bro The 1650 has different power versions on desktop and laptop So your boost clock might be either higher or lower than mine If it's lower and you use my config you can actually end up increasing temps 🤯 So look in gpu-z, to see your default clock and boost clock value, then add +100 above and beyond your boost clock so you can work in a overclock and an undervolt

[@gamerdimais8548]

@@laptoptweakingtips it has a chance of damaging my gpu or is just try without fear?

[@laptoptweakingtips]

@@gamerdimais8548 no bro, follow what I do in the video Your numbers might be different to mine, remember you're optimising your computer not mine So watch the video and follow the steps I lay out there

[@gamerdimais8548]

@@laptoptweakingtips ok thank you🫡

[@gamerdimais8548]

@@laptoptweakingtips hey, its me again haha, can you tell me how much your hot spot be? Mine reach 78.5 max undervoltaged and 90 not undervoltaged, i am scared

[@sermetyilmaz]

hello i have strix g18 i undervolt my cpu -150mv core -100 cache. now i need to under volt my gpu 4080. my boost clock 2280. whats ur suggestion? should i try 2380 on 900mv? or ??

[@laptoptweakingtips]

I certainly think that's a good place yeah to start. Honestly I have no experience with the newer rtx cards... But it goes to follow that they would function in a similar way. +100 isn't too aggressive and it should see some boost. As for the undervolt I think start at 900 yeah... You'll see pretty soon if it's too much or too little Nice hardware bruv!

[@sermetyilmaz]

@@laptoptweakingtips thanks for the answer. do you suggest while using Heaven Benchmark try to undervolt? 2- in the option of msi afterburn-compatibility properties-unlock voltage control- ( what should i select)? reference design- standart msi- extended msi- third party

[@laptoptweakingtips]

@@sermetyilmaz I'll look in the morning. It's night here so not at my computer. If I forget just resend this question bro. Don't wanna leave you hanging Heaven benchmark for undervolt is pretty good yeah 🤘

[@sermetyilmaz]

@@laptoptweakingtips ok 👍 thank you so much 😊

[@laptoptweakingtips]

@@sermetyilmaz no worries bro 👌

[@nznnnnnn.]

Hi I have a Msi GF65thin with RTX 3060 and I7 10750h and I have already tried 2 times to undervolt in my life, but even when I went down to -500 mv (I know it's too much) but I had no temperature drop, I run at about 95° with the cpu every time, any idea? I have to put in the power supply settings a maximum usage of 99% cpu to lose 30° but I lose too much fps. Could you help me?

[@laptoptweakingtips]

For the 10750h you need to undervolt, then on top of that you also have to adjust turbo ratio limits. The clocks are way too high in that CPU, also the gf65 thin is as you may guess very thin... My suggestion try core (between -100 and -150mv) cache (between -70 and -99.6mv) Turbo ratio limits set to 38 or 37 over all cores But switch power limits off, reset TPL because that's gonna mess with performance

[@nznnnnnn.]

@@laptoptweakingtips what is the TPL plz ?

[@nznnnnnn.]

@@laptoptweakingtips and also, maybe it's my motherboard that blocks the undervolting, no? And with what you told me (adjust turbo ratio limits) I can gain how many degrees from my 95?

[@laptoptweakingtips]

@@nznnnnnn. Bro you can get down to 75-80 degrees. Just follow the steps in the link I sent you.

[@zxcvbnmpvp1990]

@@nznnnnnn. On msi laptops you can on undervolting through the bios I am pretty sure

[@avazsadullayev-nn8fx]

hello! I have lenovo ideapad 3 8 gbram and mx 350 gpu. I can't find good undervolting numbers for my gpu. Can you help me? sorry for the mistakes. my english is so bad. I am from uzbekistan

[@laptoptweakingtips]

your english is fine did you look up your boost clock numbers like i did in gpu-z?

[@avazsadullayev-nn8fx]

yes Its 1468MHz @@laptoptweakingtips

[@laptoptweakingtips]

@@avazsadullayev-nn8fx ok then set the curve as I did But instead of 1785 like me, set yours to 1568mhz and I think between 800-850mv

[@avazsadullayev-nn8fx]

ok I will try it@@laptoptweakingtips

[@avazsadullayev-nn8fx]

Didn’t work😢 overheating and many fps drops🥵

[@user-io6js3mi9d]

my 1650 for easy shows 1930 for core and +550 for memory!)

[@laptoptweakingtips]

That's great bro, then you're lucky, literally the best of the best gtx1650 laptop GPU hey

[@user-io6js3mi9d]

@@laptoptweakingtips Thanks, man, i use undervolt this way:-251 on core then enter, then i did on 900 push to 1965 and get +25 fps on unreal engine tester. In resident evil +10 fps -+

[@laptoptweakingtips]

@@user-io6js3mi9d that's decent bro. I think it's called luck of the dye!!! Lol I worked with a guy whos laptop would crash even with -50mvs once, so that's the one extreme, you're on the other end. Lucky bastard! Thanks for watching bro 💪

[@bushmaster101]

went till 0.7000 V nothing is crashing, i cant lower it anymore how do i know now what's my under-volt Limit, my boost clock is 1200 and as you said i added 100 more 1300

[@laptoptweakingtips]

At 700mv are your games running fine without crashing, no artifacting If so you are fine

[@bushmaster101]

@@laptoptweakingtips yes it's running fine, but i want to find a sweet spot for stable fps, since it's fluctuates alot.

[@bushmaster101]

@@laptoptweakingtips what's artifacting

[@laptoptweakingtips]

@@bushmaster101 it's when there are glitches in your gameplay or strange colours To be safe I'd recommend 725-750mv The boost clock seems fine 1200+100

[@bushmaster101]

@@laptoptweakingtips alright thanks, what, also I noticed when I try to lower my memory MHz and save it, it stays there but after I use turbo mode to over clock my GPU it again goes back to default 7000 when I turbo it goes to 7350

[@k.williamson3643]

Brother do you know how can we decrease the igpu allocated memory from an hp pavillion laptop? I have a friend of mine who has 8 gigs of ram and the radeon igpu eats up about 3 gigs of ram. I tried going into the bios and decreasing the igpu allocated memory but the bios is locked :( ...any fix?

[@laptoptweakingtips]

I can look into that, don't have much experience with with igpus especially Radeon ones but I'll try find out for you.

[@bhopforfunheryc8104]

I dont recomend you doing that Because the shared memory will help you on scenarios where you video memory will be heavily utilized it works like the discrete GPUs but on iGPUs the RAM is shared

[@Jakiyyyyy]

I don't recommend adjusting the iGPU buffer size from 2GB to 512MB or lower it can. I tested it myself and it actually reduce the performance. Integrated graphics will take a lil bit of your RAM. For instance when I use 16GB, the iGPU took about 2.1GB. But now since I upgraded to 32GB, the iGPU took about 4.1GB.

[@laptoptweakingtips]

@@Jakiyyyyy i tend to agree, as limiting the buffer size is going to tank performance so much that youd rather just be stuck with limited ram in the first place... honestly unfortunately i havent even gotten to this yet, but ill do some further research for ya by tomorrow afternoon

[@Rayyan-hi2ge]

i am having deja vu

[@laptoptweakingtips]

Hey watch out 🏏 Lol

[@Rayyan-hi2ge]

@@laptoptweakingtips make a monitor overclocking tutorial, i just got myself a new 75 hertz panel just from overclocking

[@laptoptweakingtips]

@@Rayyan-hi2ge just be careful with that, it can cause instability over a period of time. I had a video on that, but I actually took it down. After a couple of months my monitor started screwing out. I rather not have content which can potentially cause issues with people's equipment. I do get that it's exciting though so enjoy my bro

[@Rayyan-hi2ge]

@@laptoptweakingtips my monitor can go to 78 but I kept at 75 to be safe, this saved me 100$ cause I was about to buy a 75hz panel

[@laptoptweakingtips]

@@Rayyan-hi2ge bro I'm not saying don't do it yourself, I'm saying I had a video on how to do it, but too many people were experiencing glitches. So I don't want to have a video that could potentially harm people's hardware Tis all 🤘 How you keeping btw

[@gamerhemanth2369]

Ok why does my 1650 have more cuda cores than yours i have HP pavillion

[@laptoptweakingtips]

Some released with more, I speak under correction but I think gdd5 version has more cuda cores, but the gddr6 has less But I'll find out if you like

[@laptoptweakingtips]

The gtx 1650 apparently launched with many different sku's So it was quite confusing at first to say the least Do you have 1024?

[@gamerhemanth2369]

yes i have 1024 and the link is giving me a 403 error

[@laptoptweakingtips]

@@gamerhemanth2369 I'll check it out quick thanks for letting me know

[@laptoptweakingtips]

@@gamerhemanth2369 thanks i see what you mean, i also get the error, ill just link to my google drive rather thanks again for pointing that out

[@chrisanderson196]

Is it okay to undervolting both cpu and gpu?.

[@laptoptweakingtips]

Absolutely bro, you're just creating as much thermal headroom as possible Remember a laptop, no matter how good the cooling, has a finite interior space... So heat is a killer

[@chrisanderson196]

@@laptoptweakingtips I do both GPU and cpu undervolted now and it's amazing! All thanks to you tho!. And have a question ... Should disable Nvidia whisper mode? Cuz when I play CSGO with whisper mode on my fps is quite low but when I turn it off I gain so many fps, what should I do?

[@laptoptweakingtips]

@@chrisanderson196 yeah absolutely switch it off. I only use Geforce to use the recording feature. It's a lot better than OBS

[@laptoptweakingtips]

@@chrisanderson196 ok sweet re undervolting both Literally the best thing you can do on a laptop 🤘😎

[@chrisanderson196]

@@laptoptweakingtips yeap, btw my GPU didn't crash on game even tho I undervolted on 725v how? I mean should go more lower there is only 700v left.

[@Misinformeder]

i went down to 700mv on mine

[@laptoptweakingtips]

If it's stable then there is no problem with that 👌

[@Misinformeder]

@@laptoptweakingtips hello

[@laptoptweakingtips]

@@Misinformeder hi

[@Misinformeder]

@@laptoptweakingtips ok so turns out the limit is 725mv still tryig the memory clock so far 550mhz

[@Misinformeder]

i used to run 575

[@samilgani56]

Hi. I did the same procedure as you did. But there happened huge problems and fps drops. And i reset the afterburner but the fps drop problem is not solved. Before the procedure, cpu usage is between 30-70 but now it is 3 4. How can i fix this bro pls help.

[@laptoptweakingtips]

Reset your profile and start from scratch bro Did you use your numbers from gpuz or just copied my numbers? It's important to tune your laptop/pc via testing and benchmarking and not just copy someone else's settings. Due to dye size, thermal paste quality, luck of the draw etc etc each computer even if the same CPU and GPU is different

[@samilgani56]

@@laptoptweakingtips yes i controlled gpu-z. It is 1515 for boost. And i apply 1615, but it did not worked. I will try as you said. I hope it will work. Thanks.

[@laptoptweakingtips]

What laptop do you have? What GPU do you have? What settings did you try apply? MHz and mv

[@samilgani56]

@@laptoptweakingtips it is i5-11400h gtx1650 16gb ram. What i made is i started the voltage from 900 and decrease it 2 or 3 times and tested it. But it was so bad, there was huge drops. Then i increased it a little bit but again didnt worked. Tomorrow i will reset the profile.

[@samilgani56]

@@laptoptweakingtips actually i dont understand from these pc jobs. I am just learning these bro. I am searching, trying, and learning. Thank you for the help.

[@Ryan11037]

Again

[@laptoptweakingtips]

lol someone asked me about a week ago to make this video, only undervolting with msi afterburner. i made one ages ago, but the sound quality was very bad. so this is the updated one