How - to: Trimming a 2011 Chevy Tahoe sitting on 20x10 Hostile Wheels and 7.5 inch lift

[@jeromeburrasca6710]

You're definitely going to have to NorCal the front fenders if you put aggressive mud tires on, like I did with my Suburban.

[@dominicanadrenaline7708]

My Tahoe has a 3 inch lift with 18x12 -44 on 35s had to trim a lot more into my fender rear needed no trimming

[@joshuasalinas2408]

would this kind of mod work with a 3" leveling kit? i have 22x12s on 33s im trying to put on it.. any help would be appriciated

[@dirtrulz112]

Joshua Salinas im wondering the same thing juts did a 2” leveling kit on my suburban with 20x12-44 and a 305/50/20 toyo proxies just put them on today so wondering how much i gotta chop

[@JayyMoney-vr7nv]

What about the extra plastic that hangs for the valance? I took it off but there is still plastic where it connects to

[@JayyMoney-vr7nv]

It’s connected to the bumper

[@Manoloek9]

so i have the same exact tahoe im puttin a 3" front levelin kit and a 3" leveling kit in the rear i should be able to clear 33s i bought Moto Metal 970 20x10 -24 tires are 33x12.50r20?

[@Mid-Valley-Clean]

manolo bojorquez did it clear I'm ordering the same size

[@rokkero564]

Yeah did it clear?

[@eduardosolanobhs]

I have a a 3" lift and have 20in fuels on 33x12.50r20 and i didnt have to trim

[@devanrenkas2302]

I barely have to trim I got 3 inch level and 3 inch in rear gonna try and cut/modify the piece he took out and push the liner in farther and screw it

[@kevinrobinson4442]

Recently bought a 2016 Silverado 1500 for my move to Alaska and was wondering what wheel and tire combination you would recommend for a year round ride. I see a lot of your customers go with the Hostile wheels which look really clean. I'm going to eventually put a 7in lift on the truck also.

[@kevinrobinson4442]

I'm new to the truck world so I'm still trying to figure out how I want the finish product to look. I do know that I don't want the tires to stick out from the body of the truck too much. Keep everything pretty much under the body. But I'm familiar with your shops work. I watch all your videos. You guys do a great job with the trucks.

[@OFFICIALRC-XTREME]

Would if look way better on 17s with 35s more tire and aggressive offroad look

[@Sparrow350]

How much trimming would I need to do with a 33 instead of 35? I want to go 22×14 -44, with a 33, but I might just go 20×10 with a 33 if the trimming is going to be ridiculous. Oh yeah, with a rough country 3 inch lift.

[@Matt-The-Rat]

You just have to trim the liner I have the same setup you don't need to cut the bumper or anything else

[@franciscop7105]

I got a 07 Tahoe, put on some 20x12, I put a 3inch lift in front but the tire looks like it's being pulled in, what size A upper arm would I need??

[@CustomOffsetsTV]

You should need to just do an alignment and adjust the camber

[@BartTheSpartan]

What grit flapper wheel would you recommend to donthe finish on where you decided to cut?

[@bluepacman13]

Probably 220-320

[@JP-tn2ro]

@1:12-Does anybody know what kind of wheel that is on the angle grinder tool.

[@20tea]

It's a sanding disk, but not sure which grit. I just got a 120 grit in a 4 1/2 disk and it should be fine.

[@JP-tn2ro]

Thx👍🏽

[@Deepsouth-Motorsports]

I have a 2013 serria and am running 32s and have rubbing issues I would not like to cut fenders, will a 2 inch leveling kit fix it? Any help is greatly appreciated

[@CustomOffsetsTV]

Check out the gallery for fitment help! customoffsets.com/gallery

[@YungDiddy1484]

Do you still have to do that trimming to a 2500 Silverado 🤔

[@YungDiddy1484]

+Custom Offsets ok I just thought the trimming would be different from a 1500 Silverado to a 2500 Silverado that's all thank you tho appreciate keep up the great work

[@ianaziani1723]

What kind of pad do you have on that grinder?

[@hankhale6468]

Flapper

[@aquariusking3897]

How do I lift my 2001 Durango to fit a set of 20X12 Offsets on 33's

[@aquariusking3897]

Thanks a lot bro.. I really appreciate your support

[@odinson810]

Custom Offsets I have a 2005 4wd Durango that I want to level and put 20x12 with 33s on. do you think the 20x12 will fit or am I better of with 20x10?

[@brettw448]

You don't. It's a Durango

[@limitlessworx5724]

Iam a chevy guy have 2 tahoes one lifted one regular, when is chevy gonna realize wheels and tires are round but there wheel wells aren't.

[@dt8587]

Lol, I'm a chevy guy also. Fords you can put 35s stock

[@limitlessworx5724]

@@dt8587 exactly like come on chevy get it together

[@genconex]

Street Queen? That's nowhere near enough trimming to clear for offroad use. Ties will definitely contact at full compression lock to lock.

[@miguelcastro2942]

Tobirama Senju stfu lmao

[@christianthejetskiguy]

@Tobirama Senju you haven't got a clue what you're talking about 😂

[@Blobby_Hill]

dear guy in video, you say "opinion" weird. have a good day.

[@crazycarl696969]

most people on say it wrong and say it that's my uh-pinion instead of saying it like theres and O.

[@impalaking4883]

I love Chevy but don't really like lifted trucks but damm that was bad ass

[@OFFICIALRC-XTREME]

Ugly wheels ugly tires😂 waste of lift