How to tune up an Andis Master

step by step process on tunning an Andis Master

[@lockpicker2k]

Great video! I did notice that you say to loosen the stabilizer screw one full turn after fully tightening it but in the video you only loosen it a half turn. I'm not hating or anything I just wanted to point that out in case anyone has trouble. Thanks for helping me fix my Master.

[@keepitsharp357]

lockpicker2k true thanks

[@mcfriedchicken1972]

bro you fixed my Masters 😂 i had a problem where every time i oiled it, it would start clattering. this time the clattering didn't go away even after i adjusted the power screw. thanks fam you saved me $$$ i was on my way to buying another pair of Masters

[@kellyrobbins8475]

My clippers haven't worked right in years. I had a co- worker drop them years and years ago and they haven't been right since. I haven't even cut hair for a living in the last 15 years, but it always made me sad they didn't work right because I LOVE my masters Thanks for getting me clipping again.

[@sharpone40]

Send back to Andis for a proper tuneup.

[@joelrobinson3190]

Thank you for the wonderful video tout just saved my butt 👍🏽👍🏽👍🏽👍🏽

[@CamyolaCola]

AWESOME! JUST DANG'OL AWESOME!!! Can't wait to get to work and MAX-OUT my Masters!

[@keepitsharp357]

thanks your welcome

[@1990charlest]

do you think you can fix my master and tune them for a price

[@whoabrian]

My clippers vibrate but they don’t cut at all. They stopped. I tried this method. Anything else I can possibly do? Thank you.

[@pottershand91]

question after doing this alignment my cutting arm shifts back to the right how can I prevent it from shifting back towards the right

[@diz354]

Very useful I plan on getting the masters soon

[@quincysanders119]

When I put pressure on the blade with my thumb or if I am cutting long hair, my blades stops on my masters. Any idea how I can fix this? I tried adjusting both the screw but it still gets stuck. Thanks for the help

[@keepitsharp357]

first try taking the blade off and see if hair is clogging the clipper preventing fluent movement. also take the cover off and check to see if hair is not clogged around the motor preventing proper vibration. then let me know what you find

[@faisalmohammed3624]

Do you know between the andis MVP an andis bgrv which is newer model an which is more powerful

[@keepitsharp357]

Fais Mohammed mvp newer. mabe mvp stronger

[@Dez.Imhotep]

how to do this on cordless cordless Andis master because ah too much noise

[@edisonmorais8025]

Hello my friend I am common problem with my Andis Fade Master, it is warming too, want to know if is to regulate something to her warm less or if the overheating it is normal Awaiting Edison Morais

[@ajtrevino3663]

they get hot easy. switch to Wahl. they keep cooler.

[@takadowatie4892]

What kind of pliers did you use?

[@keepitsharp357]

needle nose

[@jaypdabarber]

great info

[@marmar476]

you are the best.

[@accepro6343]

Hey i dropped last week my Andis fade us and since this the blade move a little bit the sound was really low i tried to fix that but then is went wrong now the blade dont move can somebody help me i will appracite that thank !

[@keepitsharp357]

Two things possibly happened 1 the cutter blade is loose on the fork 2 motor slid over slightly on the motor shaft Or both. Not hard to fix just have to watch the videos i have up to do tjr repair

[@accepro6343]

@@keepitsharp357 Thank you

[@vandaniel6333]

Great help thank you

[@gilbertoquirarte9035]

Fuck yeah!💪🏼💪🏼💪🏼

[@j3spencer1]

Good stuff