How To Tune Your AFC On 12 Valve Cummins!!! *FREE HORSEPOWER MODS!*

[@Kyle_Godfrey111]

If you run stock injectors then that’s why the fuel plate mod didn’t do as much as you would expect. Stock injectors can only shoot so much fuel. You need injectors that can handle the fuel delivery.

[@tsimmons1974ts]

Great videos man keep up the good work you and Greg A are number one!!!!!!!!

[@ronniesandoval5758]

Hello I love your channel.. you should do a leveling kit and bigger tires

[@justinroy4602]

Ronnie Sandoval add a leaf spring in the back tooooooooo lol 😂

[@alexnees7265]

These are the type of videos I love to see!!

[@LOUDNPROUD]

Alex Nees half to hear that!

[@hoss5299]

Looks like your having fun. Great. I'm really enjoying your channel. Invest a little in gopro mount and take note of your audio also. Gets muffled at times. This old man looks forward to your videos, my friend. Aahhh youth.

[@LOUDNPROUD]

Hoss I had mounts but lost them lol... I’ll buy more.. and yeah there’s a spot or 2 where the mic was acting up

[@ubaldo24v81]

Hoss make a KZbin channel hoss !

[@meeeee9407]

Great channel. I noticed you installed the cammed shaft washer incorrectly on re-assembly. The washer should go in between the housing and metal tab spacing the tab out slightly. Easy to do, I am not sure what difference it will make but I know it belongs under the tab.

[@danielrobinson4227]

Gotta love Ole mechanical engines. Let's see how she does with some real performance parts now!

[@LOUDNPROUD]

Daniel Robinson there will be a lot done soon!

[@thehunter1237]

I just realized I have been watching your videos for 5 months now

[@linderfam378]

Same

[@wesleytruax2469]

great video better than most on the details of how its done than most others. i bet someone was in that timing cover looks like orange silicone around it.

[@LOUDNPROUD]

Wesley Truax yeah, maybe have been KDP tabbed already or just trying to fix leak. But it’s still leaking lol.. and thanks!!

[@streetshred7863]

Please get a go pro window mount would love to see some in truck reactions and how it sounds in the cab and everything love the vids keep them commin

[@gavinward91]

Loving this cummins build.. Look forward too watching your vids everyday, teaches me a lot on things.. What can I do to my 7.3 powerstroke too get some added horsepower and a little smoke show without spending money any easy mods?

[@bencunningham1363]

Gavin Ward get a TS 6 position chip from thoroughbred diesel or any other reputable diesel supply company, and make sure you habe adequate exhaust and intake, you'll love it.

[@bluecheeze003]

Going to do this mod precisely how you did it. Have a 95 12valve. If you could estimate how much power was added, how much do you think it changed it? I’m ok with some smoke or no smoke either way. Just a little increase in power...

[@stevehuston9831]

I know this is an old video but for anyone using this video for a reference to tune their AFC the nut for the diaphragm should not be that tight. Only need to tighten it until the rubber starts to squeeze out a little bit or you will tear it. Also the really thin washer goes between the housing and the flat piece that comes off the rod that holds in the AFC foot.

[@devinboyle9765]

“Try to get you guys a thumbnail for some clickbait”😂😂😂😂 I️m dead 😂

[@markrich3271]

Bull, black smoke doesnt = hp/tq . Diesels are lean burning engine . When some one understands what that means they will understand fuel = power in the simplest terms . But it gets complicated making the engine live with more fuel. If you have black smoke at full boost your making power.

[@michaelbell8590]

Informative! My 97 12v cummins has a 4" exhaust front to back and a aftermarket air intake. It blows an insane amount of smoke and is pretty dang fast compared to stock. I'll have to take a look at the AFC now to see if that's been tampered with. You've got my follow.

[@alecmoore2430]

Gotta love a 12 valve. Easy power, plus some smoke great video!

[@mikestevens4353]

Beautiful truck man

[@johnanderson-ss1uf]

I love this video it helped me lots today thank you.

[@nickkirkland9118]

I done 30 clicks on mine and it don't smoke nearly as much as yours wonder why

[@tracefuqua3651]

She ain't sluggish anymore! Time to find a used he351cw so you can take advantage of the fuel.

[@kalaehina814]

I think if you do your tappet cover, you may have to pull the fuel pump, kind of a big job. Also have to be careful not to throw off the timing. Don't quote me thought, I haven't tinkered with my 96 for a few years now. Anyways keep up the mods!

[@Texas12valve]

I know another trick to get more power with out spending any money if you want me to make a video about it I can show you

[@stetson24v77]

Make a vid

[@Texas12valve]

fueld by dieslel I don't think it'll work on a 24v becuse it's electronically controlled

[@Texas12valve]

honda 400ex it's uploading

[@Texas12valve]

honda 400ex it's up

[@Texas12valve]

theodore raz I gained what felt like a lot

[@HADEN840693]

Just my opinion- If you're going to do anything billet, I think you should take the engine out, clean/degrease it and rebuild the whole thing to get it ready for high HP mods like you say you're getting so the engine is ready for anything you throw at it.

[@dieselman8v923]

The billet tappet cover would be a nice edition as they are o-ring sealed and most are tapped for breather ports if you plan on big power. As for the timing cover the only need for the billet one is if you are putting an adjustable drive gear on the injection pump to make adjusting the timing much easier when adding power mods.

[@greysonhamilton9320]

I'm subed to Dippin' Diesel. Keep up the great vids, and love the truck miss the other white Dodge :(

[@DieselAddict-vs9fc]

I did this step by step how you did it and. It blows zero smoke. It used to blow smoke now it don't. I'm lost lol. I've been a diesel mechanic for 5 years but ive never messed with any p-pump mod.

[@torquemonster1401]

Must not be a very good mechanic

[@upshift_garage9521]

Arp headstuds and while you do that I would do new upgraded valve springs

[@MikeUtoober]

too much smoke, you have way more potential for power with less smoke too. rolling coal is wasting fuel, which is throwing away power. clean it up abit and youll get more power

[@leifchurchill]

Mike Utoober just add more boost haha

[@MikeUtoober]

Leif Churchill yup. All the smoke is doing is making a show. No power

[@LOUDNPROUD]

Mike Utoober I’ll do doing fine tuning as I go.. just changed up the video for the guys interested in seeing how to do it

[@MikeUtoober]

dont damage your truck by rolling coal though, its not good for a diesel in a lot of cases and it can be costly to fix. i have a Jetta TDI and i liked that it could roll coal....for about a week. after that it was annoying leaving a trail behind me of smoke

[@MikeUtoober]

you have a really nice truck, dont ruin it with stupid mods like rolling coal

[@theidahomegarage8090]

Why not just do the AFC LIVE from Power Driven Diesel? It's awesome

[@jperkey7089]

I would get a kdp & billet tappet cover

[@hunterfarms1294]

Love the videos sense the beginning #LoudNProudFam

[@DoubleJVideos]

*Since

[@markrich3271]

Stop being a loser going around youtube correcting people he wrote sense and meant what he wrote.

[@DoubleJVideos]

Mark Rich 😂😂😂

[@talontsi8213]

How did you position and AFC housing fully forward or in a factory spot or pull it back a little bit

[@33snook64]

EPA ....whats that ...oh I found it like that 👍👍👍

[@PopsHowTo]

So, this is an alternative-ish way of modifying or sliding the fuel plate?

[@antonio1681]

Nice videos subscribed

[@Joshky.27]

I'm curious to see what wheels and tires will do to the overall appearance of this thing. Keep up the cool vids!

[@DarkKnightGarage]

You meant billet manifold plate not tappet cover that's on the side of you block sir sweet vids tho I'm doing just about the same exact build as you so it'll be cool to see what parts you go with keep up the awesome vids man

[@wazzup2987]

Sweet video man! Cool seeing things starting to go with the project on the truck.

[@lilmiket28]

u get a BHAF for it yet? easy, effective and cheap 👍

[@joearmstrong4652]

Hey love you truck man. l have a 24 valve and I am working on fixing it up. This a perfect Chanel for reference. will always support you!!!!

[@bugulugs77]

What size exhaust are you running ? Ans type of turbo ? Sounds wicked with the whistle

[@jeremyhattaway1101]

How much would that decrease your fuel mileage? Just curious

[@joelschermerhorn5447]

Depends on how much smoke. With 6-8 seconds of black smoke under normal acceleration, my mpg went down from 20-23 to 16-19 on 3-4 seconds of black smoke with light pedal pressure. I want to get my truck (with 100hp over injectors) to just a light haze and lightning boost for stupendous fuel economy and power when I need it. Excessive smoke means too much fuel for the turbo(s). Just installed DPS-X exhaust manifold and Banks Quick-Turbo assembly for an HX35w, along with a GlowShift 3n1 gauge with Boost, EGT, and Temp (wish I had gotten the 3n1 with the 2nd pressure hookup for drive pressure reading vs boost)

[@nicksaluzzi640]

billet tappet cover def worth it, if you plan on making more power. timing cover is just cool looking lol

[@509grind]

It's not smoke! . It's unburnt fuel. You're actually wasting fuel and doing yourself a disservice by rolling coal.

[@linderfam378]

#LoudNProudFam #notificationsquad COAALL!! That truck is always naughty it gives itself coal

[@KJV_Not_NIV]

you should buy and install an AFC live. lets you control your fuel rate and power from your cab its about 300-600 for a good one.

[@lukewallace24v]

Do a 0-60 test! my 99 24v runs does it in about 9 seconds. lol i am interested to see what it your truck will do before and after you do these upgrades!!!

[@Texas12valve]

2jz Films I've done simular things and mine does it in just under 10 and I'm manual as well

[@LOUDNPROUD]

Our 7.3 ran 0-60 9 seconds too

[@The4x4manonbroke]

Timing,then fuel, then smoke screw ... But first, a pyro is needed and should be installed...

[@calebbrown3042]

Will your camera sit on the dash ok? Other youtubers with manuals do it. Great video!

[@codycampos3917]

Awesome videos man. Can’t wait to tear into my ‘94 12 valve! I’ve got some questions for you about my build, could I email you my info?

[@morganclanton6636]

Years late but was your afc foot hard to push after this? Did it just like you it’s just hard to slide it all out back together

[@greendodge98]

You can also turn the high idle screw all the way in and it will give you another 300 rpm

[@greendodge98]

If you do the billet timing cover you need to get an adjustable timing gear otherwise its not worth it.

[@calebh8383]

Good god , that truck sounds amazing running down the road

[@LOUDNPROUD]

Caleb H it screams now lol that 5” to 8” tip and that added fuel 😎

[@kr4dh4x0r]

People that like smoke are the same people that don't mind wiping boogers on the couch that other people sit on.

[@charliedunn3646]

Hi Loud 'N" Proud!

[@LOUDNPROUD]

Charlie Da Boss hey there!

[@thankfullife7968]

Damn kids talking BS and more interested in people hitting his like button, Jesus man get to the point

[@robertmontiel5398]

I have a 96 12v the only problem it's giving me is that my vacuum pump keeps breaking a pin in it already replaced 3 times do you have an idea what could cause it? Thanks for your help

[@kaleblemmonstv6919]

What I did with my 12v was ordered a new fuel pin and Governor spring from I think extreme diesel and turned the fuel up and it rolled like no other man

[@BrimforBreakfast]

can you post the links

[@travispostlethwait7864]

I love that truck it looks just like mime and its a manual just like my 95 what year is it

[@mule585]

if your gonna be adding power and doing all these mods take care of the killer dowel pin before you kill ur engine

[@fred2845]

Sweet 2 videos just sat down to watch the video from yesterday

[@DieselAddict-vs9fc]

Awesome video! I'm a diesel Mechanic and I didn't even know this

[@clayfist4033]

Great job on the truck good video keep up the good work 👍👍

[@autobond3179]

You should get Afc live for you truck sick mod for the 12v

[@dwrightproductions8281]

Just want a little more smoke few weeks later maybe a lil more then more and more and more it’s addiction

[@LOUDNPROUD]

Dwright Productions lol

[@lamarjordan9545]

Ik that’s what happened to me

[@kennoland5319]

pretty sure you have to remove the injector pump to do a tappet cover. Just so you know.

[@lilmiket28]

u don't but it makes it a hell of a lot easier 👍

[@kennoland5319]

Ok sorry I was wrong. Thanks for the info guys. I've never have had to take one off before.

[@curioustv8464]

thats the truth!

[@curioustv8464]

Billet tappet cover has breather holes, so it does have a purpose. It also has a oring instead of a gasket to seal better and not leak. I will be getting one whenever i Decide to take my vp44 out and fix that leak. Which will probably be the same time as I do my timing and oil pan gaskets.

[@gahahahsusbshbx7223]

Are you ever gonna paint it or are you gonna leave it?

[@LOUDNPROUD]

COwheelieboy eventually haha... it’s been like 12 days of owning it though haha

[@gahahahsusbshbx7223]

LOUD 'N' PROUD I'm so glad you got a dually they look so good

[@tysenscheele4271]

Did you see a good difference in power after this?

[@garrettpavlich6163]

Just wondering if you are going to tint your windows?

[@johnnygoins7457]

That's what I want to do to my 94, i already have methanol injection., twin ram intake (banks)stage 3 injectors air raid filter and 4 inch exhaust.wouldnt trade my 12 valve for 10 chevys or fords.,but mine dont smoke ,thanks for the info.

[@pablomarquez4431]

10 clicks up.. what?? What does that do?

[@pablomarquez4431]

If you dont know why maybe you shouldnt do it.

[@jalinkeaton6024]

When you working on the nasty red ?

[@jaredsherman7578]

You want to hear your bone stock turbo whistle more remove the silencer ring out of it it

[@Miniaturehorseexpress]

I always wondered what happened to all the special ed kids from school... But I see they all alive and well, injection specialists and commenting below

[@dylanhubbard8824]

Love being part of the #loudNproudfam

[@DieselAddict-vs9fc]

Don't worry about the haters. Black smoke is not a bad thing. Now to much black smoke is bad because you can wash the oil out of your cylinders. But you ain't no where near that.

[@drewtaggart5716]

Just started watching your channel. I have a 96 3500 12 valve with 202,000. Are the airbags worth getting? Looks like I found a new channel to subscribe to!

[@Action8297]

I've always wondered why the truck doesn't just stay in the garage over night

[@clintonkirkland8980]

One of the better explanations that I've seen so far.

[@brent440]

I read comments, you didn't ruin shit. good video, truck sounds great, i will do the same with my 97 12v. wish my rockers were as rust free as yours. Those engines handle 500hp like it's nothing. around 300 is still very mild , they are so undertuned stock. Over a thousand hp tho stock parts may scatter

[@33snook64]

Awe much better man yahoooooo

[@stevenstlaurent8632]

Get a Napa 6637 or a wix 46637 air filter, fits on the stock intake hose and will give a little more horse power, the all Napa filters are made by wix they just don’t use the first number of the wix part numbers

[@rexwatson7070]

What’s the t on the back of it with the fittings

[@rvrandy1710]

THANKS !!

[@33snook64]

Send it

[@bernhard8540]

If anyone does this and they remove the tanperproof bolts take them to your local hardware store and get replacement bolts that way you don't have to worry about them coming loose or worse stripping off :)

[@michaelrichardson6576]

Do the billet stuff it will look good

[@erichedrick265]

Hey just like an FYI that black netting thing on your upper radiator hose is supposed to be where it stops your oil fill cap from rubbing against your upper radiator hose. My buddy took his off and his cap rubbed through hose and he was stranded.

[@countryboy9438]

Just a small warning for the future: once you go with bigger injectors and turn the fuel up more, she will be a little harder to start in the cold, but since you keep it plugged in you won’t have an issue. If not plugged in and super cold out with huge injectors she’s gonna be a whore to start lol

[@cholochedd6752]

What size of washer is that?

[@nicholaspap7197]

Hey dont get a billet . Its a waste its not about the looks under the hood its about the power under it and the overal truck

[@zombieresponder]

I bought a stock 1997 2500 last year. Drove it for a week wondering how anyone could tolerate the anemic performance. Mine still has the factory fuel plate in, but I pushed it all the way forward, modded the AFC, turned the star wheel, installed a boost elbow, and installed a pyrometer and a boost gauge. Major difference. Rarely do I get any smoke, and I like it that way....it means I'm not pumping excess fuel($$$) out the tailpipe. Unless you've already upgraded the clutch, it isn't going to last long with any added power. Mine is getting an upgraded clutch and some upgrades to the NV4500 in the next couple of months. After that, I can toss some real power upgrades at the cummins.

[@macdane4884]

you just need to take off your fan and put an electric fan and you'll have 50 more horses. I had the same set up on my truck and it pulled!

[@macdane4884]

you just need to take off your fan and put an electric fan and you'll have 50 more horses. I had the same set up on my truck and it pulled!

[@chrisbenoit2074]

Billet tappet cover definitely

[@boomosby3763]

Appreciate the video man! I have 3 trucks to do this 2! Cant wait!