I found a gem of 89 camero kept really clean with 26,000 miles . But it needs a new stearing column, i think its gonna be worth it lol .
@ChadHarcourt-f8e Жыл бұрын
Thanks it help me out
@godbody3959 Жыл бұрын
So i bought an 82 camaro to swap out the steering columm on my 91 which my mechanic told me 350 to swap it out, but he Said it had the wrong g connector which he said he knew someone that would rebuild the one I have for 450!! Is those prices right? Or is there something else I could do?
@3rdgenjunkies57 Жыл бұрын
82 and 92 column are different. 82 doesn't have cruise control and the lettering color is white, the 92 is yellow.
@3rdgenjunkies57 Жыл бұрын
Prices seem extremely high
@kkr7540 Жыл бұрын
Do you have to disconnect anything on the shaft under the hood just to lower the column? I want to replace my ignition switch, not replacing/removing the column.
@3rdgenjunkies57 Жыл бұрын
No just drop the column with 2 13mm bolts
@dandowodzenka8864 Жыл бұрын
Can't you remove that cable from the top of the column without removing the center console etc?
@stevenconrad37343 ай бұрын
Can you get away with not screwing that back onto the column?
@hecktor59273 жыл бұрын
Is it hard to remove gfx and bumpers? Great vids keep them up
@3rdgenjunkies573 жыл бұрын
Front bumper cover is a pain sometimes. Rear is easy. Sides are easy besides having g to remove interior plastics to get to one nut. Behind back wheel gfx are easy. Door gfx tou have to remove door panel/door card. Not too bad
@mschanandlerbong9917 Жыл бұрын
I have a 84 Z28 with a carbureted 350 I bought off of someone & I put the timing right and got it to turn on but it had the linkage wrong in the transmission cause the rear wheels started spinning so we fixed it but the next day when i went to turn it on again there was no crank at all, checked the battery, starter and everything else and they are working and have current but it still wont crank at all any ideas?
@3rdgenjunkies57 Жыл бұрын
Distibutor module. Ignition control module.
@mschanandlerbong9917 Жыл бұрын
@@3rdgenjunkies57 I checked them just now and they are working aswell
@mschanandlerbong9917 Жыл бұрын
I want to know where to check if there is current going to the ignition of the starter, hopefully I worded it right
@mschanandlerbong9917 Жыл бұрын
I think I mean which is the wire that carries the power from the ignition key to the starter , or what wire I can get power/current to the starter
@3rdgenjunkies57 Жыл бұрын
@mschanandlerbong9917 just leave the key off and jump the starter solenoid across. That will rule out if you have a bad starter.
@davidhilbert4909 Жыл бұрын
Is the cable that runs to the shifter just for automatics or manuals or both?
@3rdgenjunkies57 Жыл бұрын
Autos only
@kkr7540 Жыл бұрын
What is that black plastic cable from the column to the shifter for?
@3rdgenjunkies57 Жыл бұрын
Neutral safety I believe
@stevenconrad37343 ай бұрын
@@3rdgenjunkies57can you get away with not screwing that back onto the column
@3rdgenjunkies573 ай бұрын
@@stevenconrad3734 no
@BDOML91012 ай бұрын
When u are showing how to disconnect the cable that runs from the ignition switch(not the Key switch) yo the E-brake u cant see anything u are doing as with a lot of the things u were doing..The camera was pointed at the sky floor etc. Made most the video usless...