How to Update Your Device

[@wayneladd7509]

How about getting some units shipped to those who purchased them. Thanks for the video.

[@Advexure]

Hi Wayne, we and other distributors are working through the pre-order queue as quickly as we can. Another round of units will be leaving our facility within the next 24 hours.

[@wayneladd7509]

@@Advexure thanks. That's another 5 or so folks who will happy.

[@Emdrone1]

I just hope you guys produce more as I need one and didn’t get to order one! I see they’re sold out and I so need one really bad! It sucks using a DJI Crystalsky 7.8 on a tripod to fly my Evo II Pro 6k! I’ll be patient

[@Advexure]

@@Emdrone1 We are not allowing pre-orders online which is why they're showing as sold out. Please contact our team at [e-mail] to secure a pre-order slot.

[@Time2FLYAlDiaz]

@@Emdrone1 maverick drone systems has a shipment of 12 coming in next week that are not accounted for… give them a call. www.maverickdrone.com

[@brandontemple20]

Mine just says version check failed for firmware upgrade

[@CaliforniaPhantom]

ONE HUGE thing not mentioned is to be sure to remove props before updating the firmware as instructed in previous videos.

[@AtortAerials]

Got mine today and updated out of the box so it seems so that's good! Such a large controller and that display is SO bright like my crystal sky for my Inspire 2.....both 2000nit goodness!

[@thriftysurvivor6117]

Are there any screen protectors for the Autel Robotics Smart Controller SE?

[@zbfire1389]

How many birds ( EVO II) can I have or sink on the smart controller? I have a K6 and a DUAL - Can I have both in the same controller?

[@kentmoyer]

I paid for the new remote when are they going to be shipped?

[@itoothitooth4943]

This video is 8 months old. With that in mind, is the process to update software and firmware the same for the V3 models? Plus is Airdata app the still required to do the updates on the V3 model and SE Controller or is there a different App for the V3 model?

[@tomskerke1826]

Please post how to install landward and more features pleases.we need more information

[@preorios]

I got my V3 with the Smart SE controller. I noticed I'm missing several of the intelligent flight modes. My updates say they're up to date. Tripod and parallel tracking are my most used modes. Any way I can get those installed?

[@RobertGlazier]

I just got my autel smart controller v2. I can't get it to bind with my autel evo 2 pro. Can you help.

[@amtrmedia]

My remote only shows android system update option only. I do not have the ability to click the Autel app as all I have is the UAV app.

[@ferney082]

Super, excelente 👌 Saludos desde COLOMBIA 🇨🇴, Felicitaciones a Autel Robotic Evo 2....👏👏👏

[@LunarLightShowProductions]

Feel free to ask me any other questions you might have about this drone. I have this drone and I have lots of videos about it: Lunar Lightshow Productions

[@jayhernandez6812]

My wont say there is new version, do you have the link files V2.7.25 to download so i can put in sd card and do update manual?

[@tracywidner3029]

Everything went well except it says failed to send firmware , reboot aircraft and try again. Did this 4 times, suggest?

[@PRIME-PICTURES-no1]

Thank you for the video. I have a question. Does the smart controller apply to the existing evo2 drone? Or is it only possible for new gases?

[@tomskerke1826]

So you leave the drone off on the first software updates and then turn on on drone on the last one correct

[@jonmcbridear4710]

That is correct. Once the System, then Autel App are updated, the Drone will need to be connected and FW update done.

[@RonaldBrown59]

Good information, and thanks for sharing.

[@ozstrayapanoramas8610]

Good news - The latest smart controller app & firmware update includes the Panoramics feature

[@LunarLightShowProductions]

Feel free to ask me any other questions you might have about this drone. I have this drone and I have lots of videos about it: Lunar Lightshow Productions

[@johnnie10d]

Nobody is returning my calls or support emails at Autel. I sent my Evo 2 V2 in for repair (faulty connection caused crash) and other than the 1250.00 estimate to repair I cant get anyone to reply. Please have someone look into my case number(s). It has been a month now since this process began. Thank you

[@tomskerke1826]

How about calibration imu and gimble

[@CaliforniaPhantom]

Other two companies are saying middle to end of July know 😭 Advexure and Aliexpress were the only ones that I know of that actually shipped units. This is a major flaw and frustration of Autel. You could be day one pre-order, but end up weeks or a month behind other people that pre-ordered later.

[@ozstrayapanoramas8610]

Yes all of these calibrations are recommended after these downloads

[@LunarLightShowProductions]

Feel free to ask me any other questions you might have about this drone. I have this drone and I have lots of videos about it: Lunar Lightshow Productions

[@curt4moto]

where is the main menu so I can connect to WiFi? very frustrated here

[@royinman2712]

Something is screwy. My Smart Controller says I have the latest software update, but says that the firmware “Version update failed.” What am I doing wrong? Getting old here...

[@royinman2712]

V2 Smart Controller

[@gomesfilmador]

With the Surreal prices offered by autel robotics to its products it will probably be almost impossible to reach or even surpass the DJI manufacturer's level in relation to DRONES. If you continue in this exorbitant value footprint, you will be forgotten like many other companies.

[@tomskerke1826]

Why do I need WiFi andn

[@BlairAir]

Now that V2 Smart Controllers are getting into people's hands, how do we install Beta Versions of Autel Explorer App and V2 Evo 2 Pro FW? This update method sucks. There's no manual update workaround. Then again I have yet to see Autel respond to a comment on their KZbin channel. And they want to sell multiple new drones? 🙄 Might want to consider uprising your support operations FIRST.