How To Upgrade Gerni Hose And Gun - Short gun

How to upgrade gerni pressure hose and gun to MD Care Care 10m hose and short gun with quick connects and swivel
10m braided high quality hose -
magicdetailing.com.au/product...
short gun -
magicdetailing.com.au/product...
gerni m21 to m22 adapter -
magicdetailing.com.au/product...
quick connect hose to gun -
magicdetailing.com.au/product...

[@aaronbeven3240]

Absolute legend! You don’t know how long I’ve been searching for that M21 adapter.

[@Davidm1956]

Thanks man!! Exactly what i needed to end the confusion!!

[@choukriaoukaiti5122]

Thanks heaps legend really appreciate ur skills

[@PadmaDorjee]

Great video mate, can't believe how thick the foam is... I know there's double meaning there but we'll keep it "clean" for KZbin eh..😳

[@MdCarCare]

Haha, thanks mate

[@phantxm_ii4144]

Hey this videos was really helpful I just have one question which size hose fits onto the M21 to M22 adapter 14mm or 15mm?

[@MdCarCare]

Hey mate, m22 14mm.

[@heyheysaturday2492]

A decent that does the job

[@lynettefawkner9737]

Thanks for sharing! Where did you get the hose and adapter from?

[@MdCarCare]

All the links are in the description.

[@goatee01]

Honestly mate, don't know why you bother. Half the comments are people asking stupid questions like where to buy when you literally say at the end of the video and all the links are in the description.

[@michaelwelker3595]

What brand snow cannon are you using? Crazy foam, awesome.

[@MdCarCare]

MD car care foam cannon - www.mdcarcare.com.au

[@mal38dimi]

Thanks for the video. I purchased exact same setup and the soap you mentioned but following the dilution in the bottle doesn’t yield foam like that. I poured half the bottle in to get close to what you showed. But that’s way too much money for a single wash.

[@MdCarCare]

You may need to change the orifice. Did you purchase the short gun and snow foam from our website

[@mal38dimi]

@@MdCarCare The foam gun description stated it comes with 1.1 & 1.2 orifice. Since the 1.2mm was in the box I assumed the 1.1mm was in the bottle. Since the Gerni unit has a max output pressure of 1800psi I thought it wouldn't matter.

[@MdCarCare]

@mal38dimi Yes that's right. You can use ether orifice but the 1.1mm will give you the best foam.

[@andybuc2674]

Hi there, do you have this kit in a setup that would suit an older Gerni Classic 110.1 model?

[@MdCarCare]

This should suit your machine if your looking to upgrade the hose.. just to double check can you please contact us via our website www.mdcarcare.com.au and send us a photo of your machines outlet

[@choppa22tv]

Hi mate I bought all the equipment and am just trying to find the best way to turn the old original Gerni hose into a quick connect as it’s a m21 end to fit on to the motor but I can’t find any m21 quick connectors with that size thread. I have searched your site and they all seem to be m22, any help would be appreciated thanks great video by the way.

[@MdCarCare]

Unfortunately there isn't any other fittings for m21. The best way is to get away from m21 like our video and to upgrade the hose and gun. That way you can add a quick connect with the m22 /m21 adapter and onto the m22 hose.

[@choppa22tv]

@@MdCarCare ok thanks mate. I will be buying an extension wand so I don’t have to use the old hose and wand at all but I just thought I’d try to find a solution for the original gun and hose but I’ll just abandon that stuff and use the Uberflex hose and quick connect gun and fittings. Thanks anyway.

[@its028NVD]

Her: you pulled out out right? Me @3:00- YUP

[@Exer2]

do you need the quick attachment to attach the hose or can you use the normal one.

[@MdCarCare]

We have fittings to suit all setups

[@smithfieldmanuka5441]

Is it the exact same attachments needed for the Karcher K2?

[@MdCarCare]

Does your karcher have a screw in fitting on it or is it a push it type fitting? If it's screw in you just won't need the m21 adapter. The hose will screw directly on. If you need help please send us a message on our website www.mdcarcare.com.au

[@tomcolls9264]

Hey mate. Do you know if the M21 to M22 adapter will fit a Gerni Classic 130.3? I can't find any documentation on it, but the tape measure shows it around 20mm?

[@MdCarCare]

Hey mate, Yes it will suit.

[@tomcolls9264]

@@MdCarCare hey mate. Fitted the adapter and it's pissing out water and the pump won't hold water pressure. Does it need plumbers tape?

[@MdCarCare]

@tom colls Please send us a email [e-mail] or to our mobile [phone] Please send a photo of the issue. Kind regards Jacob

[@tomcolls9264]

@@MdCarCare thanks Jacob, I've sent a text

[@lowqualityposts912]

Just put through a purchase for everything in this video and also the snow cannon lance. So excited for it to come. Been getting into detailing and am so sick of the long nose Gerni and shitty hose.

[@MdCarCare]

Thank you, much appreciated. You'll love the upgrade

[@Ryan-de9oh]

Real question what soap are you using bro

[@MdCarCare]

Normally we use 3d pink car soap.. not sure if that's what we used in this video or not..

[@moosefactor]

At 1:03 you mention you can add a quick connect can you link the part for this in your shop please

[@MdCarCare]

For the m21 fitting you'll need this mdcarcare.com.au/product/female-m22-to-male-3-8-quick-connect-adapter/ (14mm) And for the hose - mdcarcare.com.au/product/male-m22-to-female-3-8-qc-adapter-14mm/

[@moosefactor]

Perfect thanks

[@atom410]

Hey mate great vid I have a gerni 5000 and want to change the hose and then connect another 10m and keep the original gun is this possible do you think? Thanks Rob

[@MdCarCare]

Yes, you sure can. You'll just need a m22 to gerni fitting to go from hose to your original gun. magicdetailing.com.au/product/convert-gerni-stihl-fitting-to-m22/

[@SharrodVisuals]

How long you had that Gerni for mate? Still running?

[@MdCarCare]

Yeah still running it's only our test unit

[@SharrodVisuals]

@@MdCarCare Ah right so your not putting it through the paces?

[@MdCarCare]

@@SharrodVisuals yeah not at all

[@Reyas]

So would these work on the Gerni 7000?

[@MdCarCare]

The short gun yes it will. You'll need to buy the gerni short gun kit

[@Reyas]

@@MdCarCare Does the kit come with the adapter and the quick connect?

[@MdCarCare]

@@Reyas the gerni adapter it comes with is a quick connect gerni fitting please view this link to see what's included magicdetailing.com.au/product/gerni-click-in-short-pressure-washer-gun-with-swivel-quick-release/

[@m4gician]

Are all gerni's m21 thread hose? I'd rather upgrade hose and go with short gun and quick connect wands

[@MdCarCare]

The older ones yes. The new ones have the male gerni click in fitting

[@m4gician]

@@MdCarCare can you verify if a gerni classic 110.5 is m21?

[@MdCarCare]

@@m4gician most likely. Please send us a photo to confirm ether via email [e-mail] or text 0412730283

[@Kaegama]

Website says out of stock

[@MdCarCare]

Out of stock of which item? We received a pallet today so it may be in that pallet.

[@MullockHeap]

That M21 thread is infuriating. Clearly Gerni will do whatever is possible to force people to buy their branded products.

[@roncroker2783]

I suppose you will get what you pay for with a Gerni , maybe you should have gone for one of their more up market models instead of buying their economy models that would have a better quality hose and fittings. Gerni make this cheaper version for the likes of you guys who look at the cheapness instead of the quality but are prepared to outlay good $ to upgrade. Just think of the model you could have bought instead of paying the extra $250 + . Just saying.