How To Upgrade The Supercharger Oiler On Your Sea-Doo Personal Water Craft

The superchargers on all 2007 and earlier Sea Doo models had an inferior system responsible for oiling the bearings and washers. In this video we show how to upgrade your supercharger oiler system to function like that of newer models.
Sea-Doo OEM Part Number: 420 856 877.
Get 3ftDeep stuff: 3ftdeepsports.c...
Filmed with a Canon 70D camera in the great Pacific Northwest.
Music: Asleep With The Sun, by Unicorn Heads.

[@mjhmech4903]

Love my 07 RXP. She may not have all the bells and whistles of the newer SeaDoo's but with a few upgrades she brings out the smiles for miles . Yet another high value vid 😁

[@3ftDeepChannel]

Thanks for the kind words. Hopefully you’ve rebuilt the supercharger on your machine by now. Safe riding!

[@DevonSpittleREAL]

Awesome video. Wish I saw this last year. I paid greenhulk to make the modification on my 2007. I installed a 300 supercharger. (a few other mods as well). It runs like a beast!

[@3ftDeepChannel]

Safe riding, Devon. And thanks for the kind words.

[@mathslengo9401]

Very good 👍🏼 excellent 👏🏼👏🏼

[@3ftDeepChannel]

Thanks, Math!

[@markheun6519]

I appreciate your videos; thank you for educating me!

[@T-K---]

thanks , nice video !

[@Tassie1966]

Another great video guys keep up the good work.

[@3ftDeepChannel]

Thanks, Tassie!

[@BondsGarage]

Great work as usual. Thanks!

[@3ftDeepChannel]

Thanks, Chris!

[@jordigrau3625]

Great video. 😊

[@3ftDeepChannel]

Thanks, Jordi!

[@MikeZ32TT]

Very cool.

[@DennisSwanson517]

Simply amazing. You guys make some awesome videos. Where are you located at? And is that a modified wrench to hold the supercharger?

[@3ftDeepChannel]

Thanks, Dennis! We are located in White Rock British Columbia. And yes, it is a modified wrench. Good eyes.

[@sigor2011]

How often are you suppose to rebuild the supercharger on 2008 215 after the initial change from ceramic washers.

[@3ftDeepChannel]

They keep improving the kits, so it depends when your rebuild was done. The range is between 150 and 250 hours, but we wouldn't suggest more than 200 hours and more like 175 hours. Also, time will also degrade components in the supercharger (especially the bearing case), so we also recommend doing rebuilding it every 5-7 years.

[@johnniteixeira261]

Tem algun vídeo trocando o retentor do eixo da bomba de água jet ski gtx 155 2004 ?

[@3ftDeepChannel]

Experimente este vídeo a partir de 2:52 kzbin.info/www/bejne/Z2qbkIyPrteZb9U. Boa sorte.

[@ouseouse6309]

Good job.do u recommend to check 2020 rxtx supercharger slip?it has 70 hours on it.thanks in advance

[@3ftDeepChannel]

It should be OK with only 70 hours on it. Next time you’re in the area, though …

[@976charlie9]

Do I need to put iso flex grease on the needle bearings? Where does the grease go. Thanks n

[@3ftDeepChannel]

This video will show you everything you need to do. Good luck. kzbin.info/www/bejne/Y6rEmYWXa8Smn6M

[@jean-philippeallain9344]

is it possible to give me the link where you found the parts because I can't find it on the seadoo site I have just had my 2005 RXT 215 repaired and it cost me 4000 € I would like to make your modification this is very interesting and it might make my jet last longer

[@3ftDeepChannel]

Hello Jean-Philippe, The parts are dependent on each make and model. First check out this link here for your machine: shop.sea-doo.com/ca/en/shop/sales/parts/. You should do like we did and call up your local dealer and order the supercharger upgrade kit for your machine. That way you can be certain they're the right parts. It won't make your entire machine last longer, but it should extend the life of your supercharger before it requires rebuilding. Good luck!

[@jean-philippeallain9344]

@@3ftDeepChannel thank you very much

[@MrJenya19741529]

Is SBT parts for SC reliable ?

[@3ftDeepChannel]

Probably, but we always use OEM for supercharger rebuilds.

[@dantheman6579]

With a supercharger you should always use a digital torque wrench not the analog style simply because the digital is less affected by factors like friction, temperature, or mechanical noise, that causes inaccuracies

[@3ftDeepChannel]

Good point. Digital ones were much more expensive at the time we bought ours, though.

[@garethlockhart6198]

9

[@3ftDeepChannel]

Is that 9 out of 10, or 9 out of 9?

[@dansutube100]

Can you do mine?

[@3ftDeepChannel]

Do you live in BC, Canada?

[@dansutube100]

@@3ftDeepChannel no , I guess I’ll have to keep watching videos and figure it out myself.:(. I appreciate the reply, love your videos

[@3ftDeepChannel]

Good luck, Dan!

[@dansutube100]

@@3ftDeepChannel thank you, you guys do great work!