How to Use a Chain Tool to Break a Chain

[@mlgpenguinboy9271]

I love this video because 1: You get straight into the point 2: its easy to follow

[@lewieshepherd3492]

like all videos should be

[@coreyfellows1945]

And there’s a anal scene

[@jeikun5982]

and other KZbinr they make 20 minute video for one content

[@3niknicholson]

A model of what a YT vid should be.Thanks. You informed me without boring me or annoying me, a rare thing on YT these days.

[@robertzottiify]

Great video but if the pin came out you can present it ever so slightly by hand and press it with a flat pliers, that's what I had to do and it worked.

[@timdench2583]

Thanks. Nicely explained without being a long drawn out video

[@BikeRidecom]

Thanks!

[@samguy7587]

My chain tool is basically the same but looks different, the guide was still simple to follow and learn how to do it. Great video

[@andreiASK]

Great turorial! I have one of these tool, but no instruction. After i see your video, i understand how to corectly use it! Thanks a lot!

[@AceWing905]

My bike's chain has gotten loose over time and this time I decided to replace it by myself for the first time And this is very helpful since I had no idea how to use a chain tool Thanks a lot

[@BikeRidecom]

Thanks for watching! Glad it helped you

[@Outsideville]

Thanks. I don't do this often enough to remember which set of guides to use.

[@carlferry8992]

Thanks for this video, it is what I needed to install my new Shimano Front derailleur! I had to break the chain, that didn't have a master link and reinstall the chain link.

[@isaacechevarria7646]

I broke so many chains because i was so stubborn now i can finally work on my mini bike chains again the right way!

[@SabrinaCWB168]

This is the most helpful chain video I've found. Thank you :)

[@sebastianmayer6174]

Nice Video 👍 easily explained and you Come to the point dircetly

[@michaeljameslawrence2965]

Good video that gets strait to the point I recently bought an Oxford chain tool from a local bike shop o and I am looking forward to using it. It would be good to see how to break the pin with pliers as I have a new chain 😮

[@Magnabee97]

I forgot what the 2 positions on the chain tool were for. I haven’t used one since I was a kid which is a very, very long time ago. Thanks for refreshing my terrible memory. Good video. Keep them coming. You can add me to your subscriber list.

[@RomeOpalec]

This is the most helpful video in KZbin. Thank you

[@shaunsmith9801]

Great video. Thanks for not dicking around or playing music

[@_k_rolls_turbo_]

This is the best bicycle chain video in the world 💯

[@rf4215]

Park Tool CT-5 - this work on a #40 roller chain?

[@homeelectricco]

Perfect instructions …. thanks

[@patrickjmorgan]

Takes the guesswork out of it! Thanks.

[@martingalvez2405]

Why is my chain cutter loosethreading when I cut chain i already bought 3 cutter but same problem

[@blupvps]

best tut ever

[@StevenBanks123]

So concise and quick

[@iceofautumn890]

Also helps to use chain grease while doing this so it slides easier.

[@kristianhearn1905]

God Bless y’all

[@pucuk1668]

straight to the point.. instant like..

[@captainprototype187]

I have a device but Im missing the spinning part. Im looking for a nut that has the exact threading of the inside of the device so that I can shape the end of it into the pushing pin.

[@chrisbagley8104]

Excellent video. Most helpful. Thanks.

[@markbrooks770]

Which brand is that

[@shlmel]

thanks.

[@yoncher2000]

Very helpful. Thank you

[@chandimal8664]

Thank you so much 💓

[@tobsmonster2]

Excellent video, thanks!

[@Owen4180]

Great simple video

[@rakebluewallgaming6185]

Its not working. Both the chains I used I dont even think the strongest man in the world could use this. Wont budge

[@_Deaux]

Same I just left my tool on tha chain 😂

[@rakebluewallgaming6185]

@@_Deaux I ended up using an angle grinder in the end lol

[@keithbg1917]

You can just use a long nose pliers I know it's late though lolll

[@rakebluewallgaming6185]

@@keithbg1917 I used a grindstone lol

[@rosshancocks]

Thank you this really helped out out just now. 👍👍

[@evangelistbricescott7182]

I just ordered one thanks

[@johnlane9590]

My razor ecosmart scooter chain doesn't fit on the prongs of tool. One side does, but the other side doesn't quite reach the prom. So there's no way to center it. I have the common red chain breaker combiner. Don't know if anyone can help me on that but I appreciate it. Thank you.

Wow, best video I've seen on the subject !!! Very well made, thanks a lot !

[@jketcham9004]

what are the 2 chainsplitters, I've broken a few on bmx style chain for bike

[@joesantos7196]

Wow thank you. I was so intimidated to do this myself lol

[@haroldflower8008]

my chain tool cross threaded halfway thru the job, never using the included tools again.

[@20EUR20]

💚 Short and simple instructions. 👍

[@gamernaotaku1095]

Thank u for this man! keep it up!!

[@merlincalo6877]

This was very helpful, thank you!

[@HelloHello-hk4sx]

What if the chains links are welded together? I got a bike from walmart but the chain links are literally welded to each other. They sanded the ends of them too so where you usually see a hole where the little pin or connector goes through, there isn't, it's just smooth & you can't see how they even got it in.

[@vidarsblade]

hacksaw will prolly do what u need

[@hw.lds08]

Hacksaw and a new chain

[@allentremper8243]

Very great instructions!!!!

[@estradaj777]

Very helpful

[@j.j.r9964]

Thank you very helpful video you got a new subscribe

[@driven-dreamz]

Hey man just did it . It's not impossible

[@cycleSCUBA]

What side of the chain pin do you put the tool on and try to push the pin out? I'm sure the pin only comes out one way.

[@corydalus981]

I think it works either way, but one side might give you more room to work the tool.

[@umymutmainah5528]

Brand ??

[@MRGOODW]

Thank you

[@cm6string]

Do you have to use the link that has the master link?

[@BikeRidecom]

You can use the chain tool on any chain link

[@fearlesssweety1926]

I used the same tool but I damaged it

[@Baz.007]

Same....

[@my95buick]

My chain tool won't stay on the pin center

[@HeadBassVTEC]

most videos say to never reuse the pin

[@r.carter8378]

I have never been able to get this to work! Everyone makes it look so easy... I am frustrated beyond. What am I missing???

[@coreyfellows1945]

Try a vise a hammer and a tap

[@2muchFun4yourBuns]

im confused because my chain tool looks 90% like that one but it’s not pushing pins out, either it’s too cheap or i’m too weak. you guys make it look easy

[@BikeRidecom]

There should be little resistance when pushing out pins unless they are badly corroded. Ensure the tool is properly positioned on the chain, and try using a penetrating lubricant on the chain to help.

[@darrinfry2251]

Wish it was that easy on a 415 chain.

[@Medea007]

You can put the pin back if it comes out with a hammer.

[@teedahbluedee]

This didn’t work the small part does not come out and I almost broke my thumb

[@HelloHello-hk4sx]

My chain links are welded together. 😕 Don't know why.

[@leoshedden9199]

Cheers dude! 👍🤟

[@HelloHello-hk4sx]

What if their rusted together?

[@samjays6620]

Hello did you try using wd40

[@seanrivaille6944]

i owe you one

[@bustabloodvessel5327]

Will this work on handcuffs?

[@lonelydude8392]

That was cool

[@LoldemortII]

Should've watched this video first... I didn't even know the different position had other uses.

[@HelloHello-hk4sx]

My fingers aren't strong enough.

[@_Deaux]

my Fingers starting cramping I just gave up 😢

[@dash1645]

👍🏾👍🏾👍🏾

[@benjames813]

This video is off the chain!

[@aeons1tychoco643]

Fuck now i know I fucked up

[@BigRedsBackyardBikeBuilds]

My chain tool bent wtf

[@Ethan-gz4jf]

Bro bought it for 48¢ on Temu 💀

[@freewind4093]

The on i have is a pice of shit fro. Wallmart and is ineffective

[@HelloHello-hk4sx]

You must have really weak chains, it should not come off that easily.

[@user-wr9fo6dw8d]

Helpful 👍