How to Use a SR Suntour Quick Release Thru Axle

[@markbailey3257]

Great description! Perfect for someone who had no idea whether they'd Put it back in correctly. I watched a lot of other videos first and I still wasn't sure if I'd done it right. After watching yours I was sure. You came at this issue like a rookie, and it really helped explain it to me.

[@Davebcbliss]

I can’t thank you enough. I have been messing with this problem for over an hour and I now realise that I didn’t have the slightest chance of working it out on my own !

[@LakesLee]

Literally, this evening, I learnt how to remove them. Son had a puncture and i unturned the end off, c clip and a washer came off 😂 proceeded to rebuild it on the fly. Found the clip and washer (amazingly on the trail) so will sort that tomorrow. 😊

[@sohaibfarhan2891]

Bro I legit just did this mistake and can’t fix it for the life of mee

[@LakesLee]

@@sohaibfarhan2891 bolt thru axle to replace 👍🏻

[@VicIent]

Thank you very helpful 😊

[@janis.rozitis]

Thanks, this helped me a lot!! Didn't find previously any vids on this particular system.

[@2wheelsrbest327]

Shame I never found this before as I have done what you did & lost the circling.Grandson gave me his MTB as he has just passed his car test & I had never had a bike with this skewer before.Just got to now make sure I only adjust as you said the screw end by little increments. Every days a school day as they say. Greetings from UK.

[@AJBAdventures]

Glad I found this video, though I was going mad 😂 got this type of thru axle on a Carrera fury but hoping its not damaged beyond removal

[@kace1008]

Yesssss brooo thanks, idk if you helped but you must uave. I initially started trying to figure my handle bars and then went down to the tyre messed with the lock as describe and its been 4 hours if not 5 😭😭😭 finally have managed to twist the end piece, I watched soo mamy vudsss

[@qbarnes1893]

Brilliant🥳 Still amazes me that the whole cycling industry is hell bent on producing ‘new’ ideas to overcome basic engineering including specialised tools for a specific product. Amazingly there all designed to be used with our hands, just like wrenches, spanner’s, sockets and screwdrivers etc. Quick release systems are a great idea if your not leaving your bike out in public.

[@panchopaduit2366]

how does the fork perform up to this day? is there any issues you encountered while using this fork? and how's the thru-axle skewer look like? does it have rust and stuff?

[@cyclefit1083]

Sorry for the late reply, no the fork still works great and the thru axle is still working good after figuring out how it works lol. No rust or anything yet, but I do tend to keep it clean.

[@duncanchild6511]

Hey. Is there anyway you could tell me the measurements on the o-ring? I unscrewed mine and lost it

[@chrisbarwick4807]

Just finished hours of research then finally spat the chewy went back to shed worked out pretty much what you’ve done here, 😂 came back sat down this is first video that pops up 😂 thanks for making this.

[@xcx8646]

Thanks my friend!

[@Oilyhands749]

You don’t need lock it compressed on the install as the edges are chamfered for pushing it through Only on removal do you need lock it in the compressed position. Hope this helps

[@mallowsize]

Really helpful, thanks.

[@kayaksnorkeluk8272]

Mine seized up and I kept it greased. Went to check the inner tube & had to dismantle it & then drive the spindle tube out through the forks. One of the o-rings snapped as it came apart. Think I need a new one but they're £40 😲

[@damienmitchell3080]

How do you measure it? How do I know what length to order??

[@greyepichea6600]

Same question man

[@greyepichea6600]

Same question man

[@kace1008]

My loc is the same, but the emd where you twist for the open and close, black part moves with it all as one not in seperation. It doesn’t get any tighter to then close the lock upwards. ???

[@ljspack]

Thanks

[@Terrific_M]

legend thank you!

[@victorpacamalan6681]

What fork is that and what is the actual size of that axle?

[@TheInevitableBanana]

I just installed a dropper post and the cable is abit long so can I just cut it ???

[@musicluva2023]

I know its a year on but a video of how to put the pins in with the spring etc would be great

[@robotgrass]

Solution: you can simply replace this complicated collet with a regular M5 skewer nut.

[@kace1008]

If u could get help me, my lever was stiff, and after taking it out, its became slack when trying to tighten

[@iamcyberpunk68]

ON THE LEVER END YOU WILL SEE A SMALL ALEN KEY HOLE ON THE QUICK RELEASE TURN IT IN A LITTLE BIT AND YOU ARE GOOD ONLY A FEW CLICKS AT A TIME YOU DO NOT WANT TO OVER TIGHTEN IT

[@edwinployo4588]

I'll do it thank you...

[@helidude3502]

Extremely helpful 👍 Thank you. Just received my Giordano Intrepid yesterday. I was able to make it work but I was struggling. The little tag had minimal explanation. Your video covers this perfectly. Got it first try. The hint about the C-clip is helpful, I’ll order a few extra. We have nice trails here in and around Houston. Check them out if you get the chance. 👍😎

[@trevorhill1577]

When dirt or grease gets in, fails to operate or gets jammed. It's also difficult to actually see when properly locked and must then be done by feel. Just remove fiddly collet and replace with a single skewer nut.

[@Animaunit]

Аллелуйя! Спасибо!

[@petehon1005]

American engineering? Keep it. 2h to freaking mount a wheel... And you call it quick

[@petehon1005]

Worst BS axle ever...

[@nico3727]

Yup. And if you break a plastic piece you need to buy the entire assembly

[@Startrooper5555]

I'd rather have this type than round out an hex nut.

[@olihugin-munin5935]

Why make it simple? Someone actually got paid for this piece of engineering...

[@amazementyt]

Mine is stuck

[@robertmain6678]

Also lost the circlip

[@Pies.]

dis not tightening no matter what i do all that stupid yellow thingf does is cut my thumb up

[@sohaibfarhan2891]

How’d u end up fixing it?

[@SydneyMTB]

@@sohaibfarhan2891 shoved some paper in there, eventually it clamped on it. Then a few weeks later some rain came and kinda washed the paper away but when the paper was gone all of a sudden it was perfectly fine...

[@SydneyMTB]

btw same person different account