How to use a TOWA Bobbin Case Tension Gauge and do a Quality check at the same time!

[@vfpdesign]

Liked the tip about the dots on the wheels and spinning the bobbin outside the machine.

[@ozzfest78]

I used it on class A bobbin and it still works

[@jennystrahley927]

Good info. Love my TOWA tension gauge! My Qnique 15R likes about 220 to 240 tension with Omni 40 wt polyester thread.

[@jeanielipskey1272]

I bought this from you not to long ago.Boy did it make a difference. I think I'll have to try the Towa Bobbins next.

[@clarastrom9787]

Thank you for demystifying bobbin tension ❤️

[@annmersman3257]

Thanks...I have one of these and was unsure as how to use it

[@conqueringmountscrapmorewi2509]

Very col tool for a longarm! Thanks for sharing!

[@deniseobrien8543]

Thank you for these tips. This info is so helpful!!!

[@barbaramcspadden3229]

great information- thank you!

[@Looky.lookyhere]

Thank you, thank you, thank you…

[@nichellecoley1102]

Is there a way to tell if a bobbin is defective?

[@brendafarris7350]

What a wonderfully helpful video! Sometimes it is the simple things we need to hear about. I am a newbie and alllll these tips are sooooo helpful! Question: Should EVERY bobbin be checked EVERY time before using it?? Or it this just a proceedure to do at times??

[@LindasElectricQuilters]

Normally you wind 5 to 6 to do a quilt, then all you need to do is check 1 of that group. So think of it this way, each time you use a different thread, starting a new quilt, check that 1st bobbin and you should be okay.

[@brendafarris7350]

@@LindasElectricQuilters Ok!! Hey - super helpful! I don't have a TOWA gauge...will have to seek one of these out!

[@LindasElectricQuilters]

@@brendafarris7350 We sell them on our website if you need one.

[@sheilasnow925]

does the town bobbin case fit a gammill long arm

[@LindasElectricQuilters]

Yes!

[@lynettecrompton3116]

Is there a difference when you buy one from Amazon or a dealer, besides the big price difference?

[@LindasElectricQuilters]

Not sure about Amazon's item.

[@prairiequiltingscathyglove5254]

I have a digital towa gauge. Do you have a video for this?

[@LindasElectricQuilters]

kzbin.info/www/bejne/qpere3Vvjs50psk

[@raggedyanna6-Missy]

Hi great video will this work for Janome hd9 V2 please?

[@LindasElectricQuilters]

As long as it has a bobbin case that you take out of the machine, then yes you can use this and it works.

[@nichellecoley1102]

Thanks for sharing. Should the tension on the Towa gauge be the same for a 40 wt and 60"wt thread?

[@LindasElectricQuilters]

Same number:)

[@traceytowner176]

Hello! Does this gauge work for an M bobbin wound with Tex70#69 nylon or polyester thread for a Juki industrial? Would it still need to read 220-240? Thank you!

[@LindasElectricQuilters]

Yes it will still work and yes you would normally keep the settings the same. You might find the nylon thread to gauge a little looser, but the poly thread would gauge normal. We use it for all types of thread.

[@sheilasnow925]

spell check TOWA.