How To Use A Vacuum Chamber With EPOXY RESIN

Рет қаралды 6,658

Күн бұрын

Пікірлер: 14

@Goffeclese 4 күн бұрын

This is the video I have been searching for! One that actually gives me a step by step of the vacuum chamber! This showed me that the company directions that they sent with it were incorrect! Thank you so much!

@MaxArt.Designs-Maxine.W 5 ай бұрын

Excellent video Sheri ! Very informative! Thanks for sharing 💕

@domimassou5457 5 ай бұрын

Thank you for sharing this video 😊

@mathkor89 5 ай бұрын

Thanks so much for the video, I recently got a vacuum chamber and oiless vacuum pump Not sure if it’ll work but you can do what preassembled pressure pots do, add a small L shaped extension on the inside of the pressure pot lid, so it can redirect the air, and possible vacuum oil towards the sides of the chamber. 😊

@LordoftheCats 2 ай бұрын

When the bubbles rise towards the top, do you shut off the air at the valve or turn off the pump? I understood that turning the pump off was a bad idea because the pump oil could back-feed into the vacuum chamber. Thanks.

@hannanadel697 2 ай бұрын

Can you test if it works with nothing in there or will the meter not move? Im doing the same steps but it’s not moving on the dial but I can’t find any air escaping

@racheldormon2140 4 ай бұрын

Can you use a silicone cup in the vacuum chamber?

@j3nnacat 3 ай бұрын

I was also wondering this so I did some quick googling and it seems like the answer is yes. Some people will even wait to degass their resin after pouring it into their desired silicone mold

@Ni5ei 19 күн бұрын

@@j3nnacat Just make sure there's extra room at the top of your mold. The air that goes out makes the volume smaller so you could end up with not enough resin in your mold.

@j3nnacat 19 күн бұрын

@@Ni5ei oh thank you so much for the tip!! I haven’t gotten a degassing chamber yet but I will file this tip away for when I finally get one!

@irishcrow505 Ай бұрын

I’m having problems getting mine to work. The gauge won’t move and I’ve tried everything!

@jamesspry3294 2 ай бұрын

I like your explanations, but there's something going on with your mike. Sounds like something keeps banging it. Not a show stopper, but it gets very annoying...