How To Use Cat ET. Cat Electronic Technician.

[@RobCarstuff9112]

You and Warren collaboration what a HOOT that would be!

[@tyke6351]

Haven't hooked up to a cat in years . Can't say I miss them .

[@lukeclarke9202]

Very good video. Doing homework before needing to change the source address code for a windows 10 operating control to read multiple engine data. Unit has 4 engines, 3 running at any given time.

[@Rx7man]

Always looking forward to another 'Dep'Dape video!

[@AdeptApe]

I like that name more than the actual channel name.

[@Rx7man]

@@AdeptApe And just my luck, on this vid you didn't do the usual intro!

[@mitianiseduadua2116]

Awesome! 'Learn a lot, never use this scan tool before!"

[@norwcav]

Thanks. Enjoy your videoes. We have the C7 and CX28 on one of our APC. Had a C7 running on 1 sylinder once, using the cutout. This was on a technical course. But only this one time., never again!

[@larrytalley117]

I love it....software, destruction, goofy cat guy, oh my. I wonder if this is something I should be using to monitor the C7 on my RV.

[@sahabatmekanikandalan]

Thanks for information. I'm Caterpillar Technician from Indonesian in dealer Caterpillar (Trakindo CAT)

[@kylehamilton365]

Is there a KZbin like this but for Cummins? Started watching him few weeks ago. Guy is amazing

[@Eljuancho915]

What do u need to know been wanting to start a chanel for cummins of course not as intense as this guy he is a beast I would love to have a guy like him at the shop I work at

[@2thecurve]

I love this tool. I test oht. This program is amazing and has helped me through some times.

[@mbowen007]

Love the video Josh!!! Super helpful......keep it up man!!!

[@AdeptApe]

Thank you.

[@evertondeer8599]

Thanks for your wonderful experience

[@richardbowles7690]

The dirt you show at the end -- what makes people ignore servicing their engines? WOW

[@jordanlierman1507]

That was alot of unicorn shit! Wtf!

[@dailyvideohublifelivingven4822]

Contamination control necessary during service to enhance engine life

[@jamessherwood7436]

Great job ! Thanks for your info

[@DieselEngine1234]

Thank you for the teaching

[@outdoor044]

I really enjoy these videos. (Sent from inside the big yellow mothership) 🐱

[@AdeptApe]

Peoria mothership?

[@outdoor044]

@@AdeptApe Yep, went through the Peoria thinkbig years ago and ended up in the mothership instead of the dealer.

[@tfi6279]

Excellent info I been on the fence about ordering a bootleg Chinese copy of Et and sis, mainly because I don’t know how to use it.

[@yar3839]

does the chinese copy works?

[@HungNguyen91622]

Yo does it work ? I was plan buy it

[@Razz-es9qw]

Would you know of any heavy truck code reader or scanner that is capable of doing cylinder cut out tests?

[@tonycatania7264]

On that y cable whats the other for 14 pin side

[@Mmmmmppppppp]

Thank you!

[@michaelharrington6372]

COLORADO!!!

[@bystanderbutch3509]

We used this for Cat C13s on busses. We'd scare the bus washers walking through the shop performing an IVA test. Seemed like the bus was coming apart.

[@morganmulenga515]

Thanks a lot for the information hopefully you will find time to share more on cat information management systems. Like you have just done, I would like to learn more on how to use sis vims ET and whatever you feel is ideal for cat mechanics. Thank you a lot.

[@RichardJW1]

excellent explanation! thanks

[@abpsd73]

Engine valleys always seem to be a home for some creature. I've found a few mouse nests in 7.3 powerstrokes.

[@mikegrazio5376]

is ee you using 317-7485 comm adapter. people are selling oem cat comm adapters in oem packaging but saing its new part number is 538-5051. i searched for 538-5051 on at parts and there is no listing for it. Whats your thoughts

[@asaanaderrick8676]

Thanks for the information. How can I download VIMS using the ET

[@jeffrycarolino8068]

Thank you for information,,can I ask if how to adjust the rpm for heui engine,,?

[@blacksmoke5009]

Thanks for sharing 👍

[@jaberalizadeh3252]

thank you for your nice supports, plz tell me how can i download the ET app.

[@raymondfinnemore2752]

Josh, do you have any experience with a CAT file encryption or decrypting software tool? I assume you are a true blue dealer guy doesn't like to twist up CAT engines for performance but maybe you can prove me wrong. Have you tuned up engines for purposes such as pulling competitions?

[@jolelstewart1756]

how r u,am always wachin ur videos keep up hope one day the 🌎👏will get a gd to new cattapillar engine to start running again,hope i get to come to Toronto one day to see u mate..gd job..

[@isrg7221]

is it possible to test a hydraulic valve with the et?

[@gcam474]

Great stuff. Much appreciated. 👍

[@heathershimp8119]

Can u do a video on how the fast idle works on a C7 motor? Thanks for all the free info

[@francoisvanhuyssteen4496]

hi there, i am a 64 year old retired train driver from RSA, i like diesel engines, especially the 16 cylinder and 10 cylinder ones, the other day i watched a Pakistani team overhauling an engine, on top of the pistons was a valve, i wondered what is the purpose of that valve, when you strip that engine completely , do you gooi all the bolts and nuts in one bucket and then still know were every bolt and nut belongs,

[@evertondeer8599]

Keep doing the works bro

[@navdeepbrar6045]

hi i have c15 it starts to shake when we attached to loaded trailer cylinder cut is fine what gone be the reason

[@Haidier83]

How I can see the exact event date from failure logged history

[@davidwalle5025]

Good video

[@martinsanchez1597]

How do you reset the soot

[@KhaledKhaled-ki8nf]

وهل يعمل برنامج الكاتربلر على جهاز NEXIQ وكيف

[@JonJon505]

I have a 3406E that shows 2 previous owners on the ECM and I want to do a rerate. It won't let me change anything is that a dealer only thing to get rid of the previous owners info on the ECM

[@johngoldsmith6629]

That makes no sense. You have last time a parameter was changed. Don't need a password unless customer has one. And you have a system parameter change that will require a Cat password. Most rerates require a transmission and clutch change. Unless your staying at the current peak torque value. Which if you are, your not gaining anything at 1200 RPM's. It boils down to the interlock code. When you flash the ECM to a different rating and or LOW NOX file from a non low NOX, the interlock code is changed. It will say not programmed. The engine will start up and run but the throttle will not work. It will require a level III password, to marry the ECM to the current file. A low NOX password will ask you if it's a rebuild or not and will go at no charge, if the same HP. If your changing HP up or down will require level III password and going up is a fee. Some HP changes only certain people are authorized to get them, due to the legality. Case in point if you have a MXS/NXS 550 or below and you wish to go to a 600 and up. Some engines like a MBN no rerating outside of a engine family. If you have a 475 low torque for example you cannot legally rerate it to the high torque family. You cannot get passwords from Cat. With the older engines most of the time will require a iron change to increase HP. The 5EK's was the worst. As the newer engines came out, required less and now most of the time a flash only. I get a lot of used ECM customers and have to change engine serial number, flashing ECM, interlock code, FLS/FTS changes, then you get into customer parameters and such. If you have a Cat, you need a jump drive and get what's called a ECM replacement file just in case your ECM fails. You have a copy of how it's programmed. You need a clean copy, as if it has a bug in it. If you load from file you will carry the bug into that ECM.

[@dailyvideohublifelivingven4822]

Yes you can but you need factory password or just give ECM to your local dealer to help you out.

[@josem.3292]

I have a Cat 242d skidsteer. A few months ago, my engine harness got melted and I replaced with a new harness. Ever since then, it has a code for regenerate and my skidsteer got sluggish. My question to you is, would I be able to reset codes with Cat et software with out password?

[@HungNguyen91622]

Did you ever got this worked out ?

[@emmanuelamoah2888]

Can you send me video of this training I need full training of this

[@DT-gr7oz]

Josh can one on customer ET delete regen on Backhoes?

[@DieselEngine1234]

please from what site can i down load the cat ET software

[@vagifsafarov1616]

Hi, how to troubleshoot of error 336-2 Engine control switch erratic, intermittent or incorrect on 3512C cat generator?

[@josecarbajal1164]

Can I change my engine serial number with ET?

[@johngoldsmith6629]

Yes, but why would you? If your engine is legal you could void any warranty on new parts installed. Level III passwords, could be a charge from Cat if it's legal. If not you will have to get a illegal password calculator program.

[@dailyvideohublifelivingven4822]

Yes, you can change no password required.

[@chamilkasupun2722]

What's the master ecm in engine ,transmission , implement in these ecm

[@jacobs2309]

I know it's a long and arduous process, but could you please give us a video on a 3116 overhead? There really isn't much info on this. Warren ​@western truck and tractor repair was doing a video series on this but he lost the footage.

[@mdfaisalkabir7581]

My device not support. Just show power not support CDL option . What is the reason can you help me.

[@elite1234564]

What program would allow me to change how the courtesy lights work when I open the door in my truck, its a 2007 kenworth t800?

[@alimihi]

Thanks for this video

[@wasifali4983]

Can you please give us deep information in et

[@kamrankhan1391]

Josh. Do you have any experience in cat 325L excavator. There are electronic problem. Can you help me

[@AdeptApe]

Well I mostly do engine work and mostly on truck engines. I don't have any experience or familiarity with that machine. I do understand datalinks and electrical pretty good though.

[@igitwinadiyo6091]

Sorry can you tell me where I can download ET software?

[@adekunleadewale13]

Hi Josh, please how can I get ET dealer software install in my system and the com adaptor?

[@acemobile9806]

The program reminds me a lot of Ford IDS, especially in layout. Ford & Cat have corroborated before, maybe their computer/IT guys still are. Regarding your 3208 debacle, I contract with 2 tomato farms down here in FL for service & I can just about promise that's been a farm truck. Always some jack-leg field worker who thinks they're a technician & thinks they can make a truck magically run without an air cleaner. Or some other idiotic action which results in destruction. What really sucks is I don't know enough Spanish to really chew them out good 😒

[@kingofsouth1012]

Please can you recommend best ET and have to get it download for technicials use

[@BilalAhmed-gs6pu]

Nice info....I also have et 😎

[@hamdwnalqbaty2462]

I have a Caterpillar 195 HIFC in Mayka 15 when the engine is hot and when it is cool 20 Mahua reason and thank you

[@martinnaibei4449]

I want a clear picture of ecm mother board of c9 engine

[@oscarsegovia6083]

Why does my cat electronic technician keeps giving me an error initialization of comet failed and closes the program how do i fix it

[@ivanmostert506]

Good day im having trouble with my Cat140K I've changed all 6 injectors but the machine is over fueling stuttering etc....no diagnostic codes present ive compared all values to another Cat140K the done all tests ets...the fuel delivery volume is different on the Cat thats running good its 9500mm3 but on the Cat140K thats stuttering its 18000mm3 ....No injector trim files were loaded could this be the cause?

[@raymondfinnemore2752]

Josh, does your dealer software have a keyword generator to program personality numbers? I.e FTS FLS. or does your dealership version make you phone into CAT and give them the scan code to enter the passwords? The reason I ask is when you flash the ECM you need to program the personality code by entering the passwords and I'm curious if dealers have to phone into CAT to get them.

[@chevy36ful]

No we just tap the pop up screen, enter our job number and it generates the codes, we can change fts, fls, totals. When we do complete rebuild I zero the hours.

[@AdeptApe]

What he said, although I don't zero the hours on a rebuild as they use the starting hours of a rebuild as warranty tracking.

[@dhillonsavee]

@@AdeptApe so is it possible to zero the engine hours with cat et

[@jorgem838]

@@chevy36ful how do you get the job number and what does FLS and FTS stand for? How are people making custom files out there and getting passwords even though they don't work at dealerships?

[@Thegoose95]

@@jorgem838 hacked Cat ET programs. Same people who do emission delete files on trucks

[@Shelby_Pages]

How do I get the ET software?..

[@matosdiesel2653]

Cat Comm 3 module can be used for Perkins EST?

[@mdfaisalkabir7581]

Can you help me . 10 window how to support this version. I don't know what to support license. 6 month this version don't support . Can you help me.

[@godswillautoandtruck1185]

Thank you for your videos. Please can I use jpro adapter to connect to CAT ET

[@aar52274]

You can

[@SurajSingh-wb6vq]

If cat Genset 500 kva ecp 4.2 controller in Auto mode but controller is seep mode ...sleep mode it's state which time command come

[@AmandaEuans]

Hey Josh. Thanks for all the helpful videos. Can you recommend where to buy a customer cat et software? I have a few trucks with the 3126 and one of them starts on either but then shuts down after a few seconds. I put a new huei pump and injectors in recently also new speed sensors and wire harness to injectors. And I’m getting flash codes 15-39-62 any pointers would be great thanks.

[@birdlady01mama]

Hey what brand/type laptop was that you showed in the video?

[@jonim719]

hello sir, can you help me answer, is the ET adapter the same as EST? what if ET is used to diagnose perkins 1300 machine?

[@RiyazAhmad-r7n]

I want to take this one but I don't no how should use and he give are not cd software

[@badgerpa9]

Looked like asbestos blanket inwards on the intake.

[@berniesands6201]

Is there anything that I can do other than a 3406b conversion to get power out of a 3406c peec?

[@teehashashth]

I have a question I found using j1939 for et this spn code 1383-11 (engine shut down hot ) Could any one tell me what that mean ?

[@grantharriss680]

Are you going to continue the diesel 101 videos. Really enjoyed the intro to diesel mechanics. I plan to go to a tech school this fall for it

[@AdeptApe]

Good question, the first 2 did really good, but the last 2 did really poorly. I think I'm going to make 1 more on fuel systems and probably an electric course. We will see what happens.

[@TheCRTman]

@@AdeptApe That was probably the best series you've done so far. I really enjoyed it and understood how they work much better as a result.

[@Diegotamborindeguy]

@Adept Ape hi, I’m having issues with my cat 320d 6.4 acert engine. The code is low fuel pressure on rail. The machine is still working perfect if you keep the engine speed dial on 8 or under. If you select 9 or 10 the engine enter on safe mode and loose power after a couple of minutes. Now It is doing on 8 too and I’m working the machine on 7 but it’s very slow. I have replaced: Fuel return valve (fuel rail) Low pressure pump 2 Inyectors (they had little return) Flush all fuel lines and filter base. Any idea if what could be happen? A lot of people say may be the high pressure pump but it is the only thing I didn’t change. I think the pump is very expensive for keep guessing the issue. All this parts where diagnosed and replaced by a cat technician

[@phantomxter]

Is an ACERT truck engine capable of producing more than 475 hp?

[@hvguy]

My adapter came with a manufacturer licence. 🇺🇲

[@Diegotamborindeguy]

Where did you get it from?

[@85oldsmobuick99]

I have ET2021a. On a 2017 Industrial C7.1 which has a DEF quality sensor in the tank. Is it possible to read that parameter in ET? Other venders that have a sensor you can read DEF quality % along with all the other sensor data but I cant find it in Cat et.

[@anthonymurillo6117]

Any info on how I can buy ET technician?

[@1kleineMax1]

1:00 Can you download buy CAT ET from an official Caterpillar website?

[@dkataquapit1]

U can buy it of your nearest cat dealership but it’s expensive I would recommend technical solutions on Facebook. Way cheaper

[@1kleineMax1]

@@dkataquapit1 We allready have a scanner solution in our shop. It was just pure interest. I often also asked our local dealership (in germany Zeppelin) and they never told me that i could buy it. What refere to fb makes no sense....

[@dkataquapit1]

Email [e-mail] They will have the info for cat et They sell the software for cat et and sis It’s cheaper then buying it from cat

[@alielmajouk6105]

Hi ..from where can i buy cat et licence ?

[@HungNguyen91622]

Did you ever get to buy cat et license?

[@nanayawasare5967]

Hi good afternoon please i have a problem for 950H Loder when I start the engine it's running up to 30 to 45 minutes then shutdown by himself with uot code on the ET please the engine is C7

[@winhtut7526]

Thank sir,?so much

[@ahmedovo3011]

Hi, does it work for Soilmec rigs 2007 ?

[@michaelbufe4182]

new subs here, may ask, is it possible to transfer the injector to another place just to prove the injector is not functioning normal, without any problem to the ECM

[@mikejuliet700]

Great explaination, where can I take a special course in ET cat program?

[@samuelsegunbamidele2851]

I offer this course both on site n online

[@johngoldsmith6629]

Need to do one on data logging and such.

[@sergiocelis3612]

Bud I have a 2015 caterpillar ct660s over the road dump truck with a c13 engine. I'm having trouble finding the 02 sensor, would you know where I can find it.

[@AdeptApe]

Well, I haven't touched a Cat truck in a couple years, but there are the NOX sensors on the inlet and outlet of the SCR canister under the passenger side step. I don't remember there being an actual O2 sensor anywhere on the engine.

[@sergiocelis3612]

@@AdeptApe Well here is my deal, I took my truck to Caterpillar dealer where it sat for almost 2 weeks. Why... because they share the computer to diagnose the check engine light between 4 dealers here in Arkansas. It would probably be another week and a half before they got the computer. So I picked it up and took it to the loves shop, where they told me it was the 02 sensor. Thou they couldn't specify which one was bad. I'm going to change them out one at a time to see what change happens in doing so. Found the Nox sensors at kenworth dealer.

[@thecriticatnumberonegringo5322]

Does anyone know if I can change my speed limiter with the cat et software on a 3126 engine?

[@eyobtadesse1612]

Is it safe for me to buy ET which is made in china it cost about 400-500$. Or has anyone used it before pls help

[@HungNguyen91622]

Hey did you end up buying it? I was plan buying the China ET for 1300 with the dell laptop or the lonova laptop.

[@mitchstephen5491]

I have an active code on my Cat ct660. It has the ct13 engine and the code I have is SPN 5542, I believe it has something to do with exhaust back pressure and maybe a sticky turbo dump valve. What are your first thoughts, thanks.

[@ronunderwood5771]

I think the CT13 is actually a Navistar MaxxForce 13. Not NAV’s best engine. I’m not sure who’s software is running the CT 13. If it is Navistar software I wonder if cat T even works with it?

[@matthieumillett5147]

Make merch !!!!!!!!!!!

[@user-fv6zf8hg6x]

I work for a Perkins dealer and use dealer ET for Perkins. Do you know what the differences between customer and dealer? If I get the license for Cat they probably won’t let me purchase the dealer version,

[@matosdiesel2653]

Interface Cat Comm 3 wires is the same for Perkins EST?

[@user-fv6zf8hg6x]

@@matosdiesel2653 the software is the same. The actual connection plug may be different. But they use the same protocol.

[@asheahashea2507]

Thanks

[@stevek6921]

That Cat ET is interesting, but I don't think I'd get enough out of an annual license fee, using it for the RV. And it's too bad about that customer's cylinder liners. Cha-ching...

[@树理王]

Is there any contact information?

[@Thegoose95]

You can get the dealer version of Cat ET 2020 online for free👀🤭 even with the keygen file. Fun fact, ET won't work on the newer on highway "Cat" branded trucks because they just threw a navistar N13 in there🤣 so you have to use Navistar's NED program. Shame on cat for just repainting the engine yellow and slapping a Cat logo on the valve cover lmao.

[@gcam474]

Could you reply with a link to the ET Dealer version online? Thanks very much.

[@johncholmes643]

Do you have it? Does it work? I bet not. It probably has no activation. I have several et programs and not one was free.

[@Thegoose95]

@@johncholmes643 I have the legit 2020 ET version but have downloaded 2019 ET dealer for free with the key generator online from mhhauto. 2020 is also available but I already have the legit version. Cummins insite 8.6 and JPro are also all free lol.

[@Thegoose95]

@@gcam474 have to be a member on mhhauto to access links to stuff

[@gcam474]

gabriel guzman - Thanks Gabe. Very grateful for the reply.