Watch as Ace's Home Expert, Lou Manfredini, shows you how to correctly use a hook or command strip in your home. Featured Products: Command Strips www.acehardware.com/search?qu...
Пікірлер: 145
@eileencarroll64183 жыл бұрын
Don't cut the tab. He put the adhesive strip on upside down. It is designed to hide the pull-tab. When you want to remove, PUSH UP ON THE WHITE HOOK AND IT WILL SEPARATE FROM THE CLEAR PLASTIC WALL ANCHOR. Then you can pull on the tab and remove the anchor without damage. Practice separating the two pieces before you install to get the hang of it.
@rayvvenn2 жыл бұрын
i dont get at all what you mean. what upside down?
@shonikag2242 жыл бұрын
@@rayvvenn - the tab on the sticky part is upside down. The pull tab is supposed to go near the bottom of the hook so you don’t see the tab. He (the guy in the video) put the tab at the top of the hook and it was showing. There’s nothing wrong with doing it his way, but don’t cut the tab.
@stacyyoust Жыл бұрын
Now you're confusing me 😊
@jlol8482 Жыл бұрын
I was wondering why he put it backwards! That tan isn’t supposed to show at all until you take off the hook
@Cavc8g Жыл бұрын
Lifesaver 😭
@badmamjamma4 жыл бұрын
Perfectly simple explanation. Thank you!
@AceHardware4 жыл бұрын
Thanks T K!
@kathyfann3 жыл бұрын
Thank You for explaining this it seems so simple now but everything needs instructions
@jessicagutierrez18083 жыл бұрын
Thank you SO MUCH for the step-by-step!
@Ceri-7772 жыл бұрын
Brilliant, massive thanks. Really needed this explanation because I didn't have a clue.
@landpie85444 жыл бұрын
Thank you Ace Hardware
@Victormdelrealg13 жыл бұрын
Thank you, your explanation was so good!
@mgabriel9287 Жыл бұрын
Thank you for explaining a sensible way to use these. By applying the blue side to the hook first, removing the black 'wall' side strip is easier. Command instructs one to remove the black liner first and attach it to the wall. Removing the black liner from its adhesive is ridiculously challenging (at least for me). The process described in this video is fast and easy to follow.
@Bomber411 Жыл бұрын
What blue side? I have a package right here and it says to do the red command side first, then remove the black side and attach to the wall. He put the tab on upside down so the pull tab was sticking out the top, but I don't see anything blue here?
@reenasolanki20043 жыл бұрын
Great👍🏻Thank you for short and sweet demo....very helpful
@sharonm63343 жыл бұрын
Thank you!!! Finally someone who makes sense
@PGOLDEN3 жыл бұрын
Thank you so very much, grandma couldn’t figure out how to use, finally you rescued grandma
@movieclipshd2316 Жыл бұрын
Excellent clear and simple video . Fantastic
@brandonsaquariumsandterrar89853 жыл бұрын
Thanks for the help Ace hardware!
@ShyraR4 жыл бұрын
Thanks. Very good demonstration.
@coleh62723 жыл бұрын
Very informative video, thank you!
@wk70602 ай бұрын
Great video, Ace Hardware!
@lifeisgreat42202 жыл бұрын
Honestly I know this seems simple to many but I really needed this demo especially for the removal part 🙌🏾
@endor8witch2 жыл бұрын
it's the last part....
@erikaamerica4546 Жыл бұрын
Thanks for clear instructions
@GusMcCrae11 ай бұрын
Brilliant thank you. Solved my problem.
@lizjay10169 ай бұрын
Thanks Sir. Good job.
@deemogul62054 жыл бұрын
Thank you ,great job ! 😊
@joew5710 Жыл бұрын
really helpful video thank you
@abudujana132 жыл бұрын
Thanks for the video, ACE HARDWARE
@robwilliamson61814 жыл бұрын
Great video. Thankyou
@gerarddonovan86783 жыл бұрын
Great explanation
@shirleyrazey9595 Жыл бұрын
Thank you
@elgatosiesta Жыл бұрын
Thanks 🙌
@tianyili63792 жыл бұрын
its really helpful !
@seantheshamrockguy8 ай бұрын
Thank you 😊
@stuarthenry19112 жыл бұрын
Well done that man, so easy now I know
@bonnieragland39783 жыл бұрын
Thank you for the refresher course, I lost instructions, You might add, clean wall area with alcohol 1st, let it dry. It works better.
@alicemitchell5101 Жыл бұрын
Thank you, ✨
@aartigupta59163 жыл бұрын
Thank you so much!
@emmydream58023 жыл бұрын
Wow! When I searched for a video about how to install my 3M Command hooks, I did not expect that I would see Lou Manfredini! He is such a big time celeb (included in People Magazine's sexiest men edition, I believe). Keep it real Lou, and stay true to yourself despite being in the limelight. 💋❤
@siobhanboyle81052 жыл бұрын
Great video! It is easier than I thought to set up a Command hook. Thanks!
@maryjanesherry16103 жыл бұрын
thank you
@lindamaturesass3 жыл бұрын
Thank you so much. I actually damaged the paint/plaster on my wall before because I didn't know that little tail part pulls ALL THE WAY through. LOL :-)
@cozymelodiccorner7 ай бұрын
Best Video!!! Straight to the point and gave clear instructions. THANK YOU 😊
@AceHardware7 ай бұрын
Thanks for watching!
@cozymelodiccorner7 ай бұрын
@@AceHardware You're welcome
@paulam9911 Жыл бұрын
thank you so much! very helpful!
@AceHardware Жыл бұрын
Thanks for watching!
@Walking_Diary2 жыл бұрын
Thank you sir
@LaFoxy3 жыл бұрын
Thank u!
@meghnakapoor71523 жыл бұрын
I was searching this months finally I found I did it thanks a ton 🙏🏼🙏🏼
@jko.799 ай бұрын
ahh, that was easy... thanks for "show and tell" tips!
@jeaninemcdaniel52822 жыл бұрын
Thanks 😊
@MrJurajk243 жыл бұрын
thank you :)
@jppestana13 жыл бұрын
well done
@Ann12344 жыл бұрын
Can you put on tile on a shower wall??
@JohnDoe-gg3ei3 ай бұрын
Can you use other things besides hooke
@cyberpunkholiday2 жыл бұрын
Thanks bro
@Tomatosoupbla8 ай бұрын
How much weight per strip when I have max command 20 lbs? Is one strip 20 lbs or 4 strips carry 20 lbs. Thx
@nobelnobel21465 ай бұрын
It's the best.
@kathyfann3 жыл бұрын
Thank You I never could get these to stick to my textured walls
@Sooner-im9qf Жыл бұрын
Nice enough presentation, however this gentleman put the strip on the hook upside down and left out two steps. Command package instructions say to 1. press firmly for 30 seconds and 2. wait, leaving it to "cure" for ONE hour before hanging anything on it. The "tab" part of the strip should go to the bottom of the hook. You don't have to cut it. The Command hook is designed to hide the tab. To remove, you slide of the front of the hook up off of the back thus exposing the tab. Pull DOWN slowly and completely (never pull away from the wall) and the adhesive sticking to the wall will release. No damage. Hope this helps.
@meleshasamnarine66413 жыл бұрын
Thank you so much for your help I subscribe because of this video 🙂
@AceHardware3 жыл бұрын
Thanks for subbing!
@CRVgarage3 жыл бұрын
God send!!
@kimberlytyler93733 жыл бұрын
Thank you! 😅 I freaking pulled the strip off while trying to stick it to wall directions confused me 🤦🏽♀️
@karenllano14072 жыл бұрын
Agree . The directions suck that’s why this was helpful.
@emehlhar2 жыл бұрын
I've been using these since they were introduced in the 90s. They were made better then and would hold for more than 10 yrs on average. 3M is making them with less quality now and they tend to fall off in warm weather within a year. I guess they have to make even more profit by people buying them more frequently. Still, they have no equal for versatility.
@Dion-rz3fz6 ай бұрын
I wish something had been said about how much weight you can get by with. Like can you hang a blow dryer on it? How well do they hold weight?
@belindawoodson89812 жыл бұрын
I would like to know if a Command is strong enough to hold a hutch it on the wall ?
@AceHardware2 жыл бұрын
Hi Belinda, It will depend on the weight of the hutch. Each Command strip/hook notes on there the max weight. Hope this helps!
@shondalethomas65912 жыл бұрын
Ripped off a huge chunk of wall larger than the command strip itself had two up so I went to remove the one that hadn’t fallen and the strip itself ripped as I pulled down now it’s just stuck. No way to grab it
@mironvulakh5859 Жыл бұрын
It helps to clean wall with some alcohol, let it airdry, and then install the strip with hook. Wait for about 1 hour before you load it with weight.
@c-pjawa27592 жыл бұрын
Should this work on the plastic in a van? My hook wouldn’t stick to the plastic that forms the glove compartment.
@AceHardware2 жыл бұрын
Hi There, Command strips are not recommended for auto applications, a few reasons are: • Command strips are meant for flat surfaces, dashboards/glove compartments usually have a slight curve • Command strips are not meant for use on plastic • Dashboards usually are exposed to extreme heat which is not recommended for Command strips Hope this helps!
@PhearaXT2 жыл бұрын
Hi, what percentage of rubbing alcohol should I use to clean the wall and apply command strip?
@ABadHairDay Жыл бұрын
Rubbing alcohol usually comes in 70% or 90%. Either will do. I find that 70% is plenty.
@goodmorningsundaymorning4533 Жыл бұрын
Be careful with rubbing alcohol. It stripped the paint off my walls.
@eBroncos4 ай бұрын
Hi Lou. You skipped one step that is listed in the product instructions (on cover of package). This is the step after you remove the black liner and press to wall for 10 seconds. It reads to slide the hook up and off and then to press the base firmly for 30 seconds. And only then to slide the hook back on. And also they say to wait 1 hour before use. I guess to allow the adhesive to dry and hold strong.
@robynbenedict51583 жыл бұрын
I hung a broom on a big command hook and it fell and tore the drywall off and made a hole. It was in the laundry room.
@lordbossharrow3 жыл бұрын
lol
@JamesFranklinRussellCowan3 ай бұрын
Like totally
@mrwaddahshooter2 жыл бұрын
How long do they last? Should I change them every year or so?
@Sooner-im9qf Жыл бұрын
I have had a pair of the large hooks holding up a large dry erase board for 3 to 4 years now. No problem. I expect it will hold another 4 years if undisturbed.
@kathlynsteinman3599 Жыл бұрын
Need to show how to prep the wall.
@amarige25 Жыл бұрын
how are you gonna put it on upside down.
@kellieann7128 Жыл бұрын
What would I do without you???!!! I lost the instruction insert for the hooks I bought and forgot which side goes to the wall. Light bulb moment when you said the side that says "wall" ..... what?! never noticed that. oy!
@AceHardware Жыл бұрын
Glad we can help!
@fordguy61mi5 жыл бұрын
How much weight do they hold?
@AceHardware5 жыл бұрын
Hi Greg, Each command strip can hold different weight. It's best to look at the package. The one we used in this video holds up to 5 lbs. Hope that helps!
@SimplyAngelwitch203 жыл бұрын
I used on thw window frame to hold my fairy lights it fell off
@AceHardware3 жыл бұрын
You may need to push down the sticky tab longer and then make sure the command strip for that weight works.
@bonniescott64703 жыл бұрын
Can you use them on wallpaper 🤔
@AceHardware3 жыл бұрын
Hi Linda, 3M does not recommend placing their command strips on wallpaper. Sorry!
@Capcoor2 жыл бұрын
Midwest accent in effect.
@jcvalenti6 ай бұрын
This video got a couple things wrong. #1, he applied the strip upside down ... do it with tab on the bottom to obscure the removal tab and then when you slide the hook over the backing plate, it won't be as noticeable, #2 after placing the strip on the wall, carefully remove the hook from the backing plate and press it firmly against the surface for at least a minute and #3 ALWAYS clean the surface you are applying the hook to with 90+% rubbing alcohol to clean it and let it dry before adhering - and apply a small drop to the area first to make sure it wont remove or discolor your paint - if you do not do this you will inevitably experience the hook ripping off the wall (likely with some of your drywall) at some point. This is a great product, but it will not hold any amount of weight for you unless you do these things.
@fourthwallreviews496510 ай бұрын
Are these good for hanging multiple hats on the wall
@AceHardware10 ай бұрын
Yes, you can certainly use the hooks for a hat display. Just double check the weight capacity of the hook to ensure the weight of the hat won't take it down.
@carlosjimz3 жыл бұрын
How easy to remove after a long time after applied?
@charleslai24843 жыл бұрын
as easy as it is new, I removed quite a few after 8 years. Just be gentle on pulling the strip, otherwise it will break before it came off.
@Lanaforeva4 жыл бұрын
Thanks for this I’m trying to hang some in my shower
@bdpluvsyou2 жыл бұрын
Please read the instructions. His advice is wrong according to the instructions on the packaging. First, you should prep the area with rubbing alcohol. The tab on the strip should be facing down, not up. When you attach to the prepped surface, you should press down for 10 seconds, then remove the hook and press the remaining plastic strip to the surface for 30 seconds. Then you should wait an hour before use. When you want to remove, pull the downward facing tab, down to release the adhesive. Please read the instructions, because his advice is not the same as what is printed.
@auralla2 жыл бұрын
the flap isn’t supposed to be showing because it’s supposed to go the other way. and to remove it, you remove the hook first and then remove the sticker
@Sooner-im9qf Жыл бұрын
Exactly right.
@michaelblosser52774 жыл бұрын
You put the strip on upside down. The hook will slide off of the plastic piece thus the tab to pull should be on the botttom.
@hashim_iraq2 жыл бұрын
I always pull the tap. the instructions on the package is not clear at all. thank you.
@chewster.o.45733 жыл бұрын
500th like !
@AceHardware3 жыл бұрын
We like your like!
@barbaraperfetti-vn1sm7 ай бұрын
How about a glass door??
@barbaraperfetti-vn1sm7 ай бұрын
Is it safe?
@AceHardware7 ай бұрын
It is safe on glass, just be sure to clean the area before applying.
@coochiecrook71204 ай бұрын
Bought some 7 years ago and the adhesive dried up....
@rajeshantony744 жыл бұрын
It is recommended to not to use at least for an hour as well
@odinsleep60584 жыл бұрын
you did it wrong according to 3M
@AustinPetDetective3 жыл бұрын
The area is supposed to be cleaned with Isopropyl alcohol first, and the removal tab should face downwards to make it easier when taking it off the wall ? Bad demonstration.
@releasingnow2 жыл бұрын
Expert? you put the strip upside down
@sxrge73492 жыл бұрын
True
@chrisvela486020 күн бұрын
It's good to go after 24 hours. Gotta let it really stick on there
@buknar4562 ай бұрын
An upside-down, incorrect application video. Pop the hook off to expose the uncut tag and pull down on the tag
@stokeysue89822 жыл бұрын
Thanks - tried watching the 3M video, useless
@blackboots29892 жыл бұрын
Ditto!
@user-gm8mf8zo3k Жыл бұрын
He confuse me,something don't sound right how he is saying how to put it on.
@robinbird53 Жыл бұрын
This video needs a do over if the guy is wrong in demonstrating a how to!
@liannehoang28975 ай бұрын
I’ve used these for years. He did it wrong. He put the command strip upside down. You do not want to see the tab nor should you cut it off. If you cut it off how does one take the hook off from the wall when it’s time. Do not follow these instructions!
@mikegreene84612 жыл бұрын
Yet everything behind him has been hung with nails
@trilabradorable11 ай бұрын
I’m an idiot
@JG-dt2ub2 жыл бұрын
This is horrible advice that is not how you do it nor do you ever cut the tab
@robertoquiroz16722 жыл бұрын
It looks like he is not an expert at all , because did not install the hook correctly, is a lot better if you remove the hook and the tab down