How to Use Maxpray M1 Airless Paint Sprayer by InoKraft - How to Use an Airless Sprayer

[@blucero102]

Thanks for the video! Looking at staining a large fence and need something that will get the job done. You video gives me confidence to order this unit.

[@jakemp42]

Spent a lot of time prepping a room and was excited to use this, but never got mine to start up. Have tried everything I can, followed every step from every video out there and the damn thing just doesn't turn on at all. On/Off Switch lights up, but never actually starts, no matter what pressure setting it's on. Tried making sure the ball bearings weren't stuck and they don't appear to be. Can't even get it to flush the storage fluid. Very disappointing because it seems like everyone out there loves this thing, but not gonna wait for another one to arrive from Bejing.

[@yomama9462]

Great video, very helpful. What about a how to clean the unit after you finish painting?

[@MyProjectWeekend]

Thank you, I’m glad it was helpful! There’s links to other resources in the description of the video. But here’s a video from the manufacturer on how to clean it. It’s very easy! kzbin.info/www/bejne/pn3JcmSsbK-erLcsi=a_VpN3RHDTwd-zH7

[@Meyers321]

Did you have any issue getting the nozzle extender on without leaking? Not sure if I’m missing something I have it on tight. I’m only using water for this part in cleaning the storage oil out. But water is leaking from the extender.

[@MyProjectWeekend]

I used a pair of pliers to tighten the extender on. I didn’t have any leaking issues with the extender after that.

[@charliemoxey8133]

hey good day mr smith i have a problem with my maxpray i did all the bearing troubleshooting the inlet and the outlet how ever i see a seal in the inlet like its warnm out cant get it too prime at all

[@dnhman]

Are the hoses and tips interchangeable with other brands??

[@markr9370]

Yes did that still not sucking up paint

[@markr9370]

there is a problem where the ball bearing on the suction tube gets stuck so you have to free up that bearing then I got it work again I guess this is common on paint sprayers

[@MyProjectWeekend]

Oh ok good to know. Were you able to get it working?

[@markr9370]

Yes got it working

[@markr9370]

My sprayer does want to prime paint into sprayer any ideas why I tried ever thing and nothing comes out.

[@MyProjectWeekend]

Did you watch where I walk through the steps on how to prime it for the first time? It starts at the 4:00 mark.

[@andrewhughes-ddrew37]

can you thin out the paint or are you not supostto

[@Brokenrib1993]

Can the sprayer use any paint??

[@MyProjectWeekend]

Any oil or water based paint. Here’s what the manufacturer says: “It is designed to spray most non-flammable coatings that can be cleaned with water or 100% mineral spirits.” Does that help?

[@mullholand]

I'm in the market to buy a sprayer this week. I live in Key Largo, FL and I have three buildings to paint. I don't paint that often - but when I need to - I have a lot to paint. I'm also painting a roof with Sta-Kool 15-Year Turbo-Dri Elastomeric... I assume I can't spray that because it is too thick - but unsure...

[@MyProjectWeekend]

So I’ve never personally used this sprayer for an application like that. You might be able to use it but you would need to check the directions from the maker of Sta-Kool. They state on the product that you can use a sprayer but it would be a good idea to contact their customer support to see what they recommend.

[@suanrongchen]

I think you can try this sprayer, I've used this one and it's really nice

[@BillBroadview-m2m]

You haven't showed how to clean the machine.

[@MyProjectWeekend]

Hey there! There’s links to other videos in the description of this video for more tutorials. Here’s a link to a video on how to clean it when you’re finished: kzbin.info/www/bejne/raGaomB4fc14fdksi=IisEyCpfgqu4Paov

[@Big.C]

Dude ... take that massive extension off ...